Dawley, J. A. Manufacturing Co.    Waterloo, NY 13165
Sep 17, 2007 GlideStop ChopStix is an accessory to GlideStop stop system that can be temporarily or permanently added without need for tools. It includes holding arm that requires placement of user's hand at safe distance from path of blade or cutter during machining operation. Featuring adjustable range to hold work pieces of varying length, arm is constructed of plastic components and will not cause damage in case of accidental contact with blade or cutter.

Linear Technology Corp.    Milpitas, CA 95035
Sep 17, 2007 Housed in 2 x 2 mm DFN-8 package, 1 MHz Series LTC3528/B includes internal 1 A switches that deliver output voltages as high as 5.25 V from input voltage range of 0.70-5 V, making it suited for Li-ion/polymer or single/multi-cell alkaline/NiMH applications. Current-mode boost regulators can deliver up to 200 mA of continuous output current from single alkaline cell or 400 mA from dual alkaline cells. Synchronous rectification enables efficiencies up to 94%.

TE Connectivity Ltd.    Berwyn, PA 19312
Sep 17, 2007 Designed for signal search and collection applications in RF microwave spectrum, M/A-COM TU-6401 provides simultaneous narrowband and wideband IF (intermediate frequency) outputs centered at 160 MHz (100 MHz bandwidth) and 1 GHz (500 MHz bandwidth). SIGINT microwave tuner features RF down converter integrated with direct digital synthesizer to uncouple tuning speed from phase noise. Housed in 2-slot 6U VME package, it weighs less than 7 lb.

Diolen Industrial Fibers    ARNHEM 6800 TC  Netherlands
Sep 17, 2007 Made with Fortron® polyphenylene sulfide, high-tenacity Diofort® is inherently flame-retardant and chemical resistant. It can be combined with glass, carbon, and other polymer fibers to yield blended fabrics. In addition to reinforcing hydraulic oil hoses in power steering systems where it reduces noise and vibration, product can be applied in fuel lines and charge-air coolers to provide resistance to high pressure and temperature while allowing flexibility.

Advanced Energy Industries Inc.    Fort Collins, CO 80525
Sep 17, 2007 Suited for large commercial, grid-tie installations, transformerless Solaron(TM) Inverter converts raw DC power from solar-cell arrays to AC-grid electricity. It features soft-switching technology, achieving 97% CEC efficiency and NRTL certification to UL 1741. Wide maximum power point tracking window ensures maximum, day-long processing power. With local and remote data access, operators can monitor system's performance and reliability from anywhere at anytime.

TURCK, Inc.    Plymouth, MN 55441
Sep 17, 2007 Model M27 Multifast molded 26- and 28-pin connectors provide power and signals to factory automation equipment in automotive, semiconductor, and material handling applications. Connectors can accomodate up to 18 AWG wires, and provide IEC IP 67 protection. Offered in male/female, straight/right angle, standard/custom lengths, and with PVC flexilife® cable, pigtails, or extensions, connectors can replace DB-25 styles limited to 30 V, and low current.

Spinwave Systems,Inc.    Westford, MA 01886
Sep 17, 2007 Pulse counter wirelessly transmits electric, water, and gas meter values to any building automation system for review via software suite, or email notification. Counter features one high-powered radio that connects to signal conditioning module via standard CAT5 cable for data and power transmission. Unit can be line or battery powered using 6 D-Cell batteries. Accumulated pulses and pulses per time are transmitted as BACnet, LON, or Modbus variables.

STMicroelectronics    Lexington, MA 02421
Sep 17, 2007 Model M25PX32 32-Mbit sub-sector erase device clocks at 75 MHz for supply ranges of 2.7-3.6 V and at temperatures ranging from -40 to 85°C. Dual I/O capability enables systems to double data transfer bandwidth during fast read phases. Developed in 0.11 µm process technology, other device features include 64-byte user-lockable one-time programmable area, and read-only memory setting option. Available in S08W, 5x6 mm MLP8, and S016W packages.

GE Company GE Industrial Systems    Plainville, CT 06062
Sep 17, 2007 Model Guard III Harmonic Mitigating Transformers are designed to curb harmonic current distortion in order to reduce transformer heating, and improve upstream power quality. Transformers utilize sine wave phase shifting and source impedance and are available in specific phase shifts of 0, 15, 30, and 45°. Units maintain NEMA TP-1 standards for energy efficiency, are compliant for LEED building specifications, and meet CAS C22.2 #47 UL 1561 NEMA ST20, and IEEE C57.110.

IRC, Advanced Film Div.    Corpus Christi, TX 78411
Sep 17, 2007 LRF3W Series chip resistor features resistance range from 0.002-0.100W with absolute tolerances of ±1, ±2, ±5, and ±10% and TCR as low as ±100 ppm/°C. With operating temperature range of -55 to +150°C, they are available with leach-resistant wrap-around terminations with tin/lead or lead-free matte tin-over-nickel plating. Devices are suited for high current-sensing applications such as fuel-gauging and over-current detection as well as ac/dc power supplies and VRMs.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Sep 17, 2007 With WireScope Pro LAN Cable Tester and v2.5 software, users can ensure proper certification of structured cabling in presence of Power over Ethernet mid-span devices and ac-coupled patch-panels. Tester features frequency range up to 1 GHz and is capable of testing all common cable standards, even beyond ISO/IEC Class F limit of 600 MHz.

Mouser Electronics    Mansfield, TX 76063
Sep 17, 2007 Crystek Corporation®'s RedBox VCO Series enables VCO integration into any application as plug-and-play option. Supplied in 1.25 x 1.25 x 1.59 in. aluminum enclosure with SMA connectors, devices are available in narrow to wide frequencies and feature harmonic suppression.

Honeywell Sensing and Control    Golden Valley, MN 55422
Sep 17, 2007 Offering near-linear output, covered HIH-4030 and HIH-4031 Series come in low-profile package and are available in tape and reel packaging for use in high-volume, automated pick-and-place manufacturing. Condensation-resistant HIH-4031 Series has hydrophobic filter that provides resistance to contaminants such as dirt, dust, oils, and common environment chemicals. Among others, applications include environmental controls, medical equipment, and dehumidifiers.

Honeywell Sensing and Control    Golden Valley, MN 55422
Sep 17, 2007 Safety Solutions Packages, comprised of bundled safety switches and safety control modules, facilitate machine safety planning process by providing ready-made physical protective guarding plan. Solutions cover machine protective guard applications such as pick and place packaging and assembly equipment, semiconductor manufacturing equipment, plastic molding equipment, woodworking, textile and printing machinery, and custom equipment.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Sep 17, 2007 Multiple Wire Terminal Blocks allow for connection of 2 or more conductors to one terminal block. Twin and ASIUDK series individually terminate 2, 3, or 4 wires in one terminal block of same circuit. With current rating up to 30 A @ 600 V and wiring capacity of 30-6 AWG, both series are suited for applications that call for distributing power, having redundant controllers or system components, as well as those that connect multiple devices in same circuit.

Honeywell Sensing and Control    Golden Valley, MN 55422
Sep 17, 2007 Available with variety of actuators and special terminations, V-Basic Standard electromechanical switch (V15 series) promotes precision operation for applications requiring 100 g or more operating force and electrical ratings from 16-22 A. It withstands 50,000 electrical operations at full load or 5 million mechanical cycles for life of switch. Series accepts insulated connection and all quick connect receptacles.

SolidCAM    Croydon, PA 19021
Sep 17, 2007 Supporting automatic feature recognition and machining, SolidCAM2007 R11.2 includes capabilities for 2.5D and 3D milling, machining processes, and thread milling. Functionality-specific modules include Turn-Mill, WireEDM, high-speed machining, simultaneous 5-axis milling, and Automatic Hole Recognition and Machining module. Along with features for definition of coordinate systems and splits, software offers capabilities for spiral cutting method and simultaneous 5-axis roughing.

SICK STEGMANN, INC.    Dayton, OH 45413
Sep 17, 2007 Used to facilitate adjustment of auxiliary axes, HIPERDRIVE enables fully automatic product and format changes on production machines with precision adjustment accuracy and reproducibility. Solution consists of fully integrated motor, gears, and absolute measurement system as well as performance and regulatory electronics. Able to be integrated into new and existing machines, unit comes in IP65 enclosure and offers alternative to manual hand wheel adjustments.

Pinpoint Laser Systems    Peabody, MA 01960
Sep 17, 2007 Combining compact laser transmitter with receiver and digital display, 2D Microgage Laser alignment tool enables precision measuring, machine alignment, and calibration. Laser moves across receiver vertically or horizontally and device operates on batteries over distance of 100 ft. It also features sealed pushbutton keypad as well as serial and USB interface, that connects to laptop or PC, which links to spreadsheets for plotting and analyzing data.

Intepro Systems, LLC    Santa Ana, CA 92705
Sep 17, 2007 Model I-9500LXI automated power supply test system features 6-digit multimeter, 4-channel digital oscilloscope, 5 test loads, 850 VA AC power source, and Powerstar 5 v3 software. It supports legacy test instruments that communicate using RS-232C, IEEE-488.2, Micro1000, and CAN communication buses. Single 300 W load and 4 x 75 W loads, 18 input x 4 output differential multiplexer, 16 digital inputs/outputs, 48 relay drivers, and 10 x 5 A power relays are also included.