DMSoft Technologies    Bishkek   Kyrgyzstan
Oct 11, 2007 With ability to track each program step getting operation status during conversion process in command line mode, DBSync for MS Access & PostgreSQL v2.0 performs data conversion and synchronization from MS Access database to MS SQL Server and from MS SQL to Microsoft Access. Data filters allow users to specify filtering criteria for conversion, while drop-synchronization enables users to delete records from destination database if these records are not presented (were deleted) in source.

Crouzet    San Diego, CA 92154
Oct 10, 2007 RoHS-compliant GN3 series 3-phase and motor reversing solid-state relays are designed for thermal efficiency and noise immunity. Models are suited for various 3-phase motor and heating applications as well as applications switching multiple outputs with single control signal. Supplied in IP20 touch-safe housing, series complies with IEC 62314 (2006-05) and offers built-in transient protection. Various ratings and voltages are available.

Proceq USA, Inc.    Aliquippa, PA 15001
Oct 10, 2007 Used for on-site testing, EQUOTIP® BAMBINO combines electronics with impact device that integrates release trigger into charging mechanism. Upgradeable unit weighs 110 g, measures 145 x 44 x 20 mm, and is powered by internal Li-ion battery that can be recharged through USB port or external charger. Along with integrated rebound hardness tester, features include menu-driven electronics, self diagnostics, and automatic recognition of impact direction.

Dwyer Instruments, Inc.    Michigan City, IN 46361 0373
Oct 10, 2007 Operating without adjustments or settings, FPV Series Plastic Flap Check Valves are suitable for applications where backflow could potentially cause damage to pumps, filters, or process equipment. Line pressure moves plastic flap off elastomer seat, opening valve, and when inlet flow stops, back pressure moves flap back onto seat, stopping flow. Available in 4, 6, and 8 in. sizes with EPDM O-rings, valves will not rust, corrode, or contaminate sensitive fluids.

Label Value    Tampa, FL 33634
Oct 10, 2007 Eliminating monthly postage meter fees, DYMO Desktop Mailing Solution comprises DYMO LabelWriter TwinTurbo printer with integrated USB-connected 5 lb scale, postage stamp labels, address labels, and DYMO Stamps software, which allows companies to weigh packages and print U.S. Postal Service-approved postage. Printer is equipped with dual label rolls, enabling user to print both mailing labels and stamps in seconds.

Emerson Network Power    St. Louis, MO 63136
Oct 10, 2007 Cover kits for Artesyn NLP250, Artesyn TLP150, and Astec LPS120 series simplify mechanical integration of power supplies into systems and add extra measure of electrical safety for service personnel. Available as separate add-on accessories, kits feature robust, ventilated enclosures and are supplied with all necessary insulating plates, mounting brackets, and screws. They add minimal height to power supplies and do not impact on their use in applications.

Brinkmann Instruments, Inc.    Westbury, NY 11590
Oct 10, 2007 Housed in corrosion-proof, hermetically sealed aluminum with illuminated digital display, Heidolph Hei-Tec Magnetic Stirrers utilize heavy-duty stirring magnet that yields optimal vortex results in volumes up to 20 liters. Heating plates are ceramic-coated for protection from aggressive substances.

Brinkmann Instruments, Inc.    Westbury, NY 11590
Oct 10, 2007 Radleys IS6 Tornado overhead stirring system allows simultaneous stirring of up to 6 x 250 ml round-bottomed flasks for use with 6-place Carousel Reaction Station. Enabling stirring of viscous samples and dispersion of delicate solids in solutions, it offers speeds of up to 1,000 rpm in low viscosity solutions. System accommodates 50, 100, and 250 ml round-bottomed flasks, with and without sidearms, as well as baffled flasks.

Siemens Energy & Automation, Inc.    Alpharetta, GA 30005
Oct 10, 2007 Able to be used with all types of field instruments in varying process conditions, SITRANS RD100 and RD200 enable users to view and access measurement data from remote locations. SITRANS RD100, supplied in NEMA 4X IP67 enclosure, is 2-wire loop-powered unit with 1 in. high LCD suited for hazardous environments. Accepting universal inputs, panel-mount SITRANS RD200 is suited for process instrumentation. Two optional relays can be used for alarm indication and process control.

Keithley Instruments, Inc.    Cleveland, OH 44139 1891
Oct 10, 2007 Operating with or without PC, Models 2635 single-channel and 2636 dual-channel SourceMeter® Instruments provide dc and pulse testing from femtoamps and microvolts up to 200 V/1.5 A. They include Test Script Processor (TSP(TM)) that controls source-measure unit, digital multimeter, bias source, low-frequency pulse generator, and arbitrary waveform generator functions. Units also include storage of 16 MB for up to 50,000 lines of TSP code and more than 100,000 readings.

AER Control Systems    New Haven, CT 06513
Oct 10, 2007 Providing 99%+ efficiency at .5 microns, portable, cartridge-based SPC-1000 complies with OSHA on multiple operations and meets Hexavalent Chromium standard. It features nominal 1,000 cfm at 5.5 in. of static pressure powered by 115 V, single-phase 1.5 hp motor. Constructed of 11- and 14-gauge metal, system includes 6 in. x 10 ft externally supported extraction arm and provides 177 sq-ft filter area. Ten inch rear wheels and 5 in. front swivel wheels allow mobility.

Tol-O-Matic, Inc.    Hamel, MN 55340 9499
Oct 10, 2007 Available in reverse parallel or in-line motor mounting configurations, MXE Series is offered with profiled rail bearings using THK® Caged Ball® technology to minimize friction, or trapezoidal solid bearings, which minimize stress concentration. Non-wear stainless steel bands are magnetically retained and protect internal components from contamination. Internal magnets allow sensor installation in any orientation on open side or bottom of extrusion.

Gore, W. L., & Associates, Inc., Electronic Products Div.    Elkton, MD 21922-0160
Oct 10, 2007 Using high strength toughened fluoropolymer and low dielectric constant ePTFE, Microminiature Round Cable maintains its performance through device flexure, abrasion during routing or tracking, and sterilization. HSTF consists of biocompatible dielectric material that produces optimized mechanical and electrical properties. Variety of medical devices can benefit from cable, including elecrtophysiology products and small diameter flexible endoscopes.

Wagner Companies, The    Bulter, WI 53007
Oct 10, 2007 Installed by hand, Ultra-Tec® Push Lock(TM) and Pull Lock(TM) Fittings do not require special swaging equipment to attach cable tensioners and stop-ends to cable at job site. Units are made of Type 316 stainless steel and can be used with wood or metal framed railings, inside or outside, on levels runs or stairs. Once installed, there are no acorn nuts or rough cable ends and, in many cases, hardware is largely concealed inside railing posts.

Linear Technology Corp.    Milpitas, CA 95035
Oct 10, 2007 Model LT3595 is 45 V, 2 MHz DC/DC buck mode converter designed to operate as 16-channel constant current LED driver. Independently operated and able to be dimmed to ratios as high as 5000:1, each channel drives up to 10 x 50 mA LEDs in series, enabling device to drive up to 160 x 50 mA LEDs while delivering efficiencies up to 92%. External resistor sets LED current for all channels and dimming is controlled for each using individual PWM pins.

Eaton Corp.    Cleveland, OH 44114
Oct 10, 2007 Available for single- and 3-phase applications up to 17 kW, Powerware® Enclosure Power Distribution Units (ePDU(TM)) are designed for mixed IT environments. They complement UPSs distributing power to up to 45 receptacles per ePDU, and feature user-selectable combination of NEMA, IEC, or hardwired inputs and NEMA and IEC output receptacles. PDUs support remote monitoring and management, and offer flexible mounting options including 1U, 0U, and wall/floor mounting.

De Dietrich Process Systems, Inc.    Mountainside, NJ 07092
Oct 10, 2007 Combining features of hydrofoil and trapezoidal agitator blades, OptiFoil® maximizes pumping action required for homogenization, suspension, heat transfer, and crystallization of fragile particles. Shape of blade produces effective mixing of minimum product volumes, creates strong flow at reactor bottom, and facilitates evacuation of vessel by reducing gap between blades and bottom of reactor. Blade can mix minimum of 5 gal in 500 gal vessel, and 20 gal in 4,000 gal vessel.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Oct 10, 2007 Measuring 8 mm in dia, IP67 protected ultrasonic thru-beam proximity sensors feature teach-in input mode and offer sensing range from 20-60 mm, with optimal sensing range of 45 mm. Splice sensors detect presence or absence of glue, splices, bondings, or base material. Label detectors are used in automatic detection of labels and carrier materials, while double sheet detectors help identify 0, 1, or 2 sheets of material with weights ranging from 10-2,000 g/m².

Advantech Automation Corp.    Cincinnati, OH 45240
Oct 10, 2007 Featuring IGMP Snooping, SNMP, and port mirroring, Model EKI-7659C offers traffic control for network performance and security, along with self-healing fiber optic ring abilities to ensure network uptime in adverse environments. It includes 8 Fast Ethernet (100Base-TX) and 2 gigabit (1000Base-T) ports, which support copper (RJ-45) connections and optional SFP modules. QoS ensures priority delivery of critical data, while MAC and IP filtering limit access to authorized devices and users.

Danaher Motion/Portescap    Radford, VA 24141
Oct 10, 2007 Suited for space-constrained medical and automation applications, nuvoDisc(TM) flat brushless dc miniature motors feature 11.7 x 32 mm dia footprint. Offering speeds of up to 50,000 rpm and mechanical power output of up to 30 W, motors provide high-speed slotless design that reduces vibration and eliminates cogging to provide smooth operation. Low power consuming units are also available in slotted design for applications that require detent torque.