Industrial Magnetics, Inc.    Boyne City, MI 49712
Aug 31, 2011 Featuring industrial-grade, stainless steel housing, USA-manufactured VersaLift(TM) can be used on flat or round, non-flexing steel in horizontal lifting orientation. Unit has built-in lift capacity test function, which helps user determine if load is safe to lift. With optional bolt-on lift bracket, flat parts can be lifted in vertical orientation without additional equipment. Embedded RFID chip tracks history of any maintenance and/or calibration performed on unit.

Anderson Thermal Devices, Incorporated    Hawthorne, NJ 07506
Aug 31, 2011 Complimentary to various substrates, Fast Response Medium Wavelength Lamps (FRMW) are engineered to optimize radiation of energy within medium wavelength range. Medium wave IR energy output by these heaters is absorbed by water, inks, paints, and plastics. Supplied in lengths up to 52 in., IR lamps are capable of color temperature of 2100°F and peak wavelength of 2.0 microns. This frequency can be generated with up to 100 W per linear inch.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 31, 2011 Available in 12 models and in TO-220AB, ITO-220AB, and TO-263AB power packages, 45 V TMBS® Trench MOS Barrier Schottky Rectifiers offer current ratings from 10-60 A and low forward voltage drop down to 0.33 V typical at 10 A. Units feature dual chip center-tap configuration and maximum operation junction temperature of 150°C. Devices are compliant to RoHS Directive 2002/95/EC and WEEE 2002/96/EC.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 31, 2011 Offered in 0805, 1206, 2010, and 2512 case sizes, PLTT series operates from -55 to +215°C and features resistance range from 250 ohm to 3 Mohm; non-standard values are available. With stable film and performance characteristics of 500 ppm at +215°C for 2,000 hr, standard TCR of ±5 ppm/°C, and tolerances down to ±0.02%, resistor is optimized for low-noise single-signal processing required to compensate for low offset and temperature drift in high-temperature environments.

ICM Controls    Syracuse, NY 13212
Aug 31, 2011 Suitable for intermittent pilot boilers, furnaces, and other heating appliances, Models ICM295 and ICM296 replace Carrier LH33WZ510 and LH33WZ512 ignition controls, while Models ICM2901 and ICM2902 replace JCI G770RJA-1 and G776RGD-14 ignition controls. Each offers microprocessor-based precision and compatibility with both liquid propane and natural gas. Model ICM295 is a continuous spark unit, while other 3 offer 100% safety lockout feature.

Sherwin-Williams Co. c/o Ultimate Lead Systems    Berea, OH 44017
Aug 31, 2011 Offered as 2-component solution, 3425E Static Control Water-Based Epoxy Coating may be used as coating or topcoat over standard flooring systems to provide static dissipative flooring system in range of 106-109 ohms resistance. It provides resistance to wear, abrasion, and chemical attack from common alkalis and acids and can also be used as conductive coating in range of 25,000-106 ohms resistance when applied over 3424 Conductive Water-Based Epoxy Primer.

Aitech Defense Systems Inc.    Chatsworth, CA 91311
Aug 30, 2011 Intended for avionics applications, M595 PMC and M597 XMC Boards use 600 MHz AMD/ATI E4690 GPU with 512 MB on-chip GDDR3 SDRAM frame buffer. Model M595 transfers graphics and video to host system via high-speed 8-port PCIe link, while Model M597 adds advanced video functions with analog and digital video input and overlay for flexibility via 100 MHz connectivity using 64-bit PCI-X bus. Both mezzanine boards integrate video and audio decompression units and complex 3D shading algorithms.

Huron Technologies, Inc.    Leslie, MI 49251
Aug 30, 2011 Diluted with water at ratio of 1 part concentrate to 15 parts water, Release Coating 7885 forms resilient barrier between composite mixture used in manufacturing process and mold surface, protecting mold from scratches and damage during molding process. Water-based release agent, designed for 200-450°F use, is suited for brake and clutch plates in automobiles, light and heavy-duty trucks, off-road vehicles, aircrafts, and industrial braking applications.

Hayward Industrial Products Inc., Hayward Flow Control Systems    Clemmons, NC 27012
Aug 30, 2011 Suited for tight spaces, Model EPZ-6 has torque output of 55 lb-in. while Model EPZ-15 delivers 135 lb-in. Both are non-spring return with NEMA 4/4X enclosure and have ISO5211 F03/F05 mounting pattern. Actuators feature On/Off jog control, aluminum alloy dry powder-coated housing, thermal Class F motor protection, and manual override. Typical applications include waste and water treatment, chemical processing, food and beverage, pharmaceutical, and irrigation/agriculture.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Aug 30, 2011 Available in flame-proof package, Series AT11910 has set points from 0.07-20 in. w.c. for air and non-combustible compatible gases found in hazardous area applications. Set point adjustment is made via range screw located inside aluminum enclosure. Equipped with 1/8 in. NPT female brass pressure connection and two ½ in. FNPT electrical connections, IP66-rated SPDT switch features temperature range of -30 to 180°F.

Count On Tools    Gainesville, GA 30501
Aug 30, 2011 Featuring FSC-certified hickory wooden handle, PB Swiss Tools Model PB 304 has 2 different shaped heads made of wear-resistant polyamide. Hardened head features steel plate covering polyamide head for flat striking surface, best suited for heavy-duty applications. Soft head, featuring crowned striking surface made of special polyamide material, is intended for precise, fine striking and other gentle or light-duty applications.

Advantapure, Div. Of NewAge Industries    Southampton, PA 18966
Aug 30, 2011 Designed for pharmaceutical, biologics, food and beverage, and chemical fluid flow applications, sanitary hose fittings include stainless steel, silicone, TPE, Hytrel®, and polypropylene options. Fittings mate with hose made from silicone, PTFE, FEP, PVC, EPDM, TPR, and TPE and are supplied attached to hose/tubing. Depending on type, fittings are offered in sanitary, pipe thread, and cam and groove styles; mini and standard Tri-Clamp styles are also available.

Alltec Corporation    Canton, NC 28716
Aug 30, 2011 Designed to be less attractive to thieves, TerraBar® busbars are available with custom-engraved messages such as "PROPERTY OF..." and "DO NOT RECYCLE." Products can also be plated with materials that disguise copper makeup while still providing optimal conductivity. Full line of available hole patterns and sizes with all associated mounting hardware and insulators is available, and busbars can be delivered with ground leads already exothermically welded to them as needed.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Aug 30, 2011 Available in lengths 4-5xD, Silent Tools milling adaptors can enhance surface finishing when applied to various milling operations. These dampened adaptors optimize productivity by allowing extended engagement milling cycles via increased temperature limitation. Possibility to channel coolant through arbor contributes to increased tool life.

Fabrico, Inc.    Kennesaw, GA 30144
Aug 30, 2011 Available for industrial, UL, specialty, barcode, and RFID labels, Label Printing Service can brand product with name or trademark, provide instructions for use, meet regulatory compliance, provide warning or safety information, and enable tracking. Converting capabilities allow Fabrico to provide pressure-sensitive labels, decals and graphic enhancements, reflective films or strips, warranty labels, tamper-evident labels, and single- or multi-color labels.

Weidmuller, Inc.    Richmond, VA 23236
Aug 30, 2011 Designed for use outside cabinet in machine and industrial automation applications, M23 Circular Connector Series includes 6- to 19-pole signal connectors, 6-pole power version, and hybrid model with 4 power contacts and 4 signal contacts. All contacts are gold-plated, guaranteeing over 1,000 mating cycles with currents from 8-28 A at voltages of 100-800 V, depending on connector. Operating from -40 to +257°F, connectors are IP67 and IP69K rated and CE and UL approved.

Totech Europe B.V.    Dronten 8253  Netherlands
Aug 30, 2011 Designed to exceed challenges associated with IPC J-STD-033B.1, Series XSD 1400 and XSD 700 replace vacuum oven baking of taped on reel components. Units combine dual-wall insulated steel and glass design with U5002 Dynamic Series closed loop Zeolite dryer, delivering humidity levels below 0.5% RH and vapor content of less than 0.6 g.m³. Cabinets dry PCBs and other moisture sensitive devices without oxidation and inter-metallic growth induced by high-temperature baking.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Aug 30, 2011 Measuring 6 mm wide with 6 A contact rating, CK Series is available with integrated fuse protection and LED indication. Relays offer variety of electromechanical, solid-state, and passive interface modules, as well as PTC push-in jumper to common inputs and outputs. Electromechanical relays are rated AC or DC for inductive applications, while solid-state relays come in single or dual models for packaging machinery applications. All are soldered in, making them impervious to shock and vibration.

Electronic Design & Research Inc.    Louisville, KY 40258
Aug 30, 2011 Rated at 220 Vac/50 A (11 kW), Intelligent Sustainable Switch (iSUPS-220/50, P/N EDR84080) provides power to load from one of 2 power sources: power line (grid) and backup. It does not require additional power source for normal operation or any external commands to function. Self-contained solution exploits fuzzy-logic SPDT/N relay with tri-state output, intelligently processing signals in real-time when switching instantly (less than microseconds) from failed to reliable power source.

CharTec    Bakersfield, CA 93311
Aug 30, 2011 By ensuring maximum uptime through real-time onsite data protection as well as offsite backups, CharTec BDR v2 provideds continuity for business-critical infrastructures. Utilizing StorageCraft v4.1.5 allows MSPs to backup clients' systems and data on Windows servers and recover it to any kind of environment, including virtual machine, physical hardware, or to cloud. Reporting functionality on portal allows partners to see detailed information about backups and virtualization.