Datapaq Inc.    Wilmington, MA 01887
Oct 23, 2007 Designed to facilitate profiling process, Surveyor consists of fixed sensors that eliminate variables associated with thermocouple attachment, adjustable frame that rides on oven's rail or mesh belt, and software that automatically stores profiles for analysis. Using sensors, Surveyor can identify out-of-tolerance conditions before they become problematic.

Advanced Research Co.    Orion, MI 48359 1865
Oct 23, 2007 Providing secure, self-tracking storage, RFID-enabled Storage +(TM) Smart Cabinet knows in real-time what items it has inside, what items have been removed, and who took them. Commercial-grade cabinet is fitted with RFID antennas and readers for auto-inventorying items. Applications include vendor managed inventory, test/diagnostic equipment storage, critical spare parts/tool storage, regulated/hazardous substance storage, and document/software storage.

Baxa Corp.    Englewood, CO 80112
Oct 23, 2007 PadLock(TM) Set Saver provides secure seal for end of administration set, preventing contamination when set is not being used for infusion. Replacing need for sterile, single-use caps, product can be swabbed and re-used multiple times. It is designed to promote best practice for aseptic IV administration set disconnections, preventing touch contamination and securing IV line in-between drug administrations.

KMT Robotic Solutions, Inc.    Auburn Hills, MI 48326
Oct 23, 2007 Design for automated trimming of plastics and composites, RoboTrim® RT-1900 features inverted, rail-mounted KMT AccuTrim® R-110 robot inside steel enclosure with side access door and safety interlocks. Rail permits robot to move up to 4.5 m, and 2-sided, 19 ft rotating servo table supports up to 700 lb on each side while accommodating parts up to 13 x 5 ft. Various safety features, such as light curtains, and software, including RouterWare®, are provided.

GE Fanuc Embedded Systems    Huntsville, AL 35803
Oct 23, 2007 Offered with choice of Intel® dual core processors, VP11 and VR11 support up to 4 GB soldered DDR2 SDRAM and provide multimedia functionality with provisioning of AT 2D and 3D graphics engine as well as audio support. Single-slot VR11 can be ruggedized and supports 2 PMC sites or single PMC site together with hard disk subsystem. PCIExpress-based XMC option is also available. Dual-slot VP11 allows for 2 PMC sites and on-board HDD or CompactFlash subsystem.

RadioPulse Inc.    Seoul   Korea (south)
Oct 23, 2007 Compliant to ZigBee and IEEE 802.15.4, Series MG245X integrates 2.4 GHz RF transceiver, 8-bit microcontroller, a/u-law voice codec, 64-key scan, 96 KB embedded flash, 8 KB SRAM, and 8-bit ADC into single chip. Units support 250 Kbps, 500 Kbps, and 1 Mbps for wireless applications, as well as 16 MHz MCU system clock and 1 Mbps UART interface.

Infor    Alpharetta, GA 30004
Oct 23, 2007 Supporting multiple applications from single device, Infor EAM Advanced Mobile enables organizations to extend asset management capabilities to in-field workers. Adaptable and portable solution comes with mobile-centric templates for work, asset, and inventory management; inspection and audits; direct store delivery; and RFID. It also supports functionality such as GIS and GPS, multi-dimensional barcode reading, and integration with ERP, HR, and calibration systems.

Saelig Co., Inc.    Pittsford, NY 14534
Oct 23, 2007 Housed in 52 x 20 x 16 mm transparent polycarbonate shell and powered by 170 mAh lithium polymer battery, MSR145S Series is designed to measure and record several different physical parameters simultaneously, such as temperature, relative humidity, pressure, and 3-axis acceleration. Internal memory stores over 2,000,000 measurements. Using MSR Software, users can customize measurement and recording requirements, with resultant data transferred to PC.

Zebra Technologies    Vernon Hills, IL 60061 3109
Oct 23, 2007 With single-card print time of 5.2 sec, Zebra P330m is designed for printing large quantities of single-color cards as well as personalizing pre-printed card batches. Card thicknesses from 10-60 mil are supported, and angled card feeder system offers 100-piece input capacity (220 with plastic extensions). While USB and 10/100 Ethernet connectivity options enable enterprise-wide deployment and management, options are available for magnetic stripe and smart card encoding.

MessageLabs Inc.    New York, NY 10018
Oct 23, 2007 Offering access to email even after it has been archived, MessageLabs Archiving Service v3.0 archives all internal and external email communications while ensuring privacy and data security. It offers search and retrieval, supervision and reporting capabilities, as well as messaging policy set-up and enforcement. Attachment stubbing process replaces attachments in users' mailboxes with references to archive.

Physik Instrumente (PI)    Auburn, MA 01501
Oct 23, 2007 Able to tolerate bending radii down to ¾ in., P-876 piezoelectric composite patch transducers are suited for active or adaptive systems and can be applied to curved surfaces. Product is manufactured by placing piezoceramic foil between 2 conductive films, all embedded in ductile composite-polymer structure. Brittle piezo-ceramic is mechanically prestressed and electrically insulated, providing resistance to damage and lifetime of over 10⁹ cycles.

Horizon Semiconductors Ltd.    Herzliya   Israel
Oct 23, 2007 Multi-standard native 1080/60p Transcoder, Hz4010, supports features and capabilities designed to meet cable, satellite, IPTV, and Blu-Ray/HD-DVD requirements. Integrated video pre/post-processor offers motion compensated spatio-temporal noise reduction filtering, frame rate conversion, and scaling, while audio CODEC engine enables transcoding between various audio formats. Along with programmable high-bandwidth transport processor, solution also includes security processor.

CourseForum Technologies    Ontario N1E 4P5  Canada
Oct 23, 2007 Run securely on organization's network, ProjectForum v5.6 supports collaboration within and between professional workgroups. It supports Atom feeds, features RSS tools, and keeps information safely in-house and protected. Supporting multiple workgroups from one server, it offers full version control, secure authentication options, document management, and full branding support. Administrators can replicate individual forums, track user activity, and manage forum pages.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Oct 23, 2007 Mounted onto cutting head of DW713, DW715, DW716, and DW718 miter saws, Crosscut Positioning System (XPS(TM)) worklight (DWS7085) provides users with additional visibility that helps increase productivity and cut alignment. Crosscut Positioning System offers blade shadow cut line indicator to create unobstructed view of miter cut area, facilitating accurate cuts in materials of all widths. Powered via separate power supply, light can be used with or without blade operation.

Laser Photonics, Inc.    Lake Mary, FL 32746
Oct 23, 2007 Utilizing CO2 laser with up to 1,000 W of power, Model SBM1200M cuts plastic, acrylic, wood, stone, aluminum, stainless steel, and most other metals. Non-contact process prevents bowing and minimizes internal stress, reducing damage and deformation. With small footprint and user-friendly interface, system can be integrated into existing production lines.

Emerson Process Management, Rosemount Div.    Chanhassen, MN 55317
Oct 23, 2007 Rosemount 702 wireless discrete transmitter allows access to data on plant performance and safety and is fully compatible with existing smart wireless networks. Applications include level and environmental spill prevention, personnel safety, and plant equipment status. It is an extension of PlantWeb® digital plant architecture and supports variety of non-powered switch types, with single- or dual-channel capacity, and is hazardous area-approved.

TDK-Lambda Americas Inc.    San Diego, CA 92154
Oct 22, 2007 Offering 10 output voltages from 3.3-60 V, HWS1000 series accepts inputs from 85-265 Vac and meets SEMI F47 power line sag specs. Most models can be adjusted up to ±20% nominal voltage, and 7-60 V models have peak power rating of 1,200 W when operated with line voltage of 200 Vac or higher. Compliant with EN61000-3-2 power factor and harmonic correction standards, RoHS-compliant series comes in 5 x 3.25 x 9.5 in. metal case and operates in ambient temperatures from -10 to +71°C.

LMC Workholding    Logansport, IN 46947-7006
Oct 22, 2007 FBS MK5 Model Face Driver features near-zero runout designed specifically for hard turning or grinding operations. Able to turn workpiece from end to end in one operation, device allows entire OD of workpiece to be machined in single operation. Mechanical face driver is maintenance free and can allow for heavy and interrupted cuts for turning small and large parts.

Spectrum Control, Inc.    Fairview, PA 16415
Oct 22, 2007 Custom line of connectors are for use in 60 V audio frequency circuits with 0.5 A of current to provide effective EMI filtering. Waterproof, polarized devices have capacitance value range of 10 pF - 1 mF and are available in C and Pi circuit configurations, as well as 5- or 6-pin electrical plugs/receptacles. They also meet all requirements of MIL-STD-810F, including sand, dust, salt, fog, high altitude operation, fungus resistance, and immersion to 20 meters.

AMETEK Solartron Metrology    Gastonia, NC 19301
Oct 22, 2007 Series SI 7500 multi-axis metrology display connects directly to Orbit® Network and accepts up to 16 Orbit Module inputs, including digital probes, linear encoders, and analog input modules. Featuring 6-color LCD and audio cues, it reports dynamic min/max measurements and provides SPC analysis from integrated database and offers connectivity to PCs and other peripherals. Its 16-channel capacity can handle up to 100 parts.