Cimatron Ltd    Givat Shmuel 54090  Israel
Sep 06, 2012 CimatronE v11 offers analysis capabilities for multiple functions as well as centralized control over visibility, set definition, and Quick NC Process. Engineering Change Order (ECO) application lets mold designers manage unlimited number of ECOs while maintaining integrity of previous design modifications. Other features include 2.5-Axis and Rough applications with VoluMill technology; Quick NC Process; and framework for creation of progressive and transfer dies.

ABB Ltd.    Zurich CH-8050  Switzerland
Sep 06, 2012 As complete sun-to-grid solution, Concentrated Photovoltaic (CPV) system integrates solar power generation plant controller and smart grid interface. Operators can control voltage, frequency, real power, reactive power, power factor, and ramp-up rate of generation to maximize reliability and efficiency on network. Also, visibility is provided down to component level of plant to optimize performance and O/M costs. Real-time and historic performance data are made readily available.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Sep 06, 2012 Available in frequencies of 9, 14, 18, or 26.5 GHz, FieldFox Analyzers can be configured as cable-and-antenna analyzers, spectrum analyzers, vector network analyzers, or combination units. VNAs provide 2-port S-parameter measurements with trace noise of ±0.004 dB and dynamic range of 94 dB. Spectrum analyzers provide amplitude accuracy of ±0.5 dB at power-up, with no warm-up required. For harsh environments, units have sealed enclosure, compliant with MIL-PRF-28800F Class 2 requirements.

Brüel & Kjær    Norcross, GA 30071-1588
Sep 06, 2012 Intended for vehicle and powertrain engineers, PULSE 17 sound and vibration analyzer platform offers capabilities for telephone testing, sound quality metrics, and structural correlation analysis. Angular analysis capabilities are also included, along with time-domain source path contribution technology with SPC Time Insight UI and draw-in filters. Field pass-by systems support multiple regional standards and can calculate to multiple standards during measurement.

GOEPEL electronics LLC    Austin, TX 78759
Sep 06, 2012 Consisting of Intellectual Properties for implementation and control of chip embedded instruments, ChipVORX® models enable multitude of FPGA-assisted test and programming functions, such as programming of parallel NOR and NAND-Flash, frequency measurement, and high-speed programming of serial Boot Flash. Within ChipVORX framework, instruments are temporarily loaded, configured, and finally controlled as soft macros via standard IEEE 1149.1 TAP into FPGA.

Teknor Apex Co.    Pawtucket, RI 02861
Sep 06, 2012 Chemlon® 813 CI and 830 GHI fiber-reinforced compounds, based on nylon 6/12 polymer, provide chemical resistance and minimal moisture absorption required in fuel line components for automotive industry. With 13% loading of carbon fiber, Chemlon 813 CI provides antistatic conductivity. Chemlon 830 GHI compound has 30% loading of glass fiber, promoting strength and rigidity in applications such as connectors. Finished part dimensions are acceptable in existing tooling used for nylon 12.

Grammatech, Inc.    Ithaca, NY 14850
Sep 06, 2012 Performing whole-program, interprocedural analysis on C/C++ code, CodeSonar® v3.8 identifies complex programming bugs that can result in system crashes, memory corruption, and concurrency errors. Taking advantage of multi-core processors, version 3.8 can quickly analyze projects with millions of lines of code while minimizing false positive rate. Architecture visualization provides insight into relationships between elements in software and scales to large projects.

Southern Photonics Ltd    Auckland 1010  New Zealand
Sep 06, 2012 Designed for use across commonly used discrete wavelength ranges of 1, 1.5, and 2 micron, OSA-G Series delivers core functionality needed for production engineering and manufacturing applications. Grating-based optical spectrum analyzer (OSA) solution is engineered to capture high-resolution spectral data using platform that supports customization during assembly process.

Epec Engineered Technologies    New Bedford, MA 02740
Sep 06, 2012 Comprised of electronically commutated motors, EXR series enables energy-efficient residential ventilation. System powered by EXR50 in testing exceeded Energy Star® requirements of moving at least 2.8 ft³ per meter of air per Watt of electrical energy consumed by fan by more than 500%.

Cooper Lighting    Peachtree City, GA 30269
Sep 05, 2012 Featuring AccuLED Optics(TM) system, Navion(TM) LED Luminaire allows lumen output and energy consumption to be customized to fulfill exact lighting needs of area, eliminating uplight, glare, obtrusive spill light, and overlit hot spots. Five configurations provide lumen packages from 3,600-22,000 lumens, with 4,000 K correlated color temperature and 70 CRI. Featuring die-cast aluminum construction and powder-coat finish, luminaire comes standard with 10 kV dual-mode surge protection.

Pulse Electronics    Trevose, PA 19053
Sep 05, 2012 Planar ferrite sheet antenna, measuring 35 x 50 mm with minimum thickness of 0.30 mm, enables safe, non-contact, wireless communication for NFC connectivity to mobile devices. Even when installed in handset in close proximity to battery or metal housing, this near field communications (NFC) antenna lets mobile phones read data from distance of up to 40 mm to meet EMVco specifications. Design can be customized to accommodate varying sizes of handset mechanics.

DALSA    Waterloo, ON N2V2E9  Canada
Sep 05, 2012 Suited for high-throughput machine vision inspection applications, Piranha4(TM) has 7 x 7 µm pixel size and is based on CMOS bilinear line scan technology with on-chip CDS and on-chip ADC. Line rates up to 50 kHz at full resolution promote inspection precision, speed, and responsivity. Along with GenICam(TM)-compliant interface, camera features programmable exposure control, gain, flat field correction, white balance, and color correction.

ViTrox USA    San Jose, CA 95112
Sep 05, 2012 Specifically designed for tray-to-tray IC device inspection, TH-1000 Vision Handler offers Double Unit Inspection, which is able to detect stack-up IC devices in tray, minimizing over-rejection rates. TR-1000 Vision Handler, catered to tray-to-reel IC device final inspection, is equipped with built-in taping module, dual nozzles, and tray-to-tape pick-and-place features for throughput of 12 K. Coupled with 3-in-1 vision station, system supports 3-D and 5-sided inspections.

EPLAN Software und Service GmbH & Co. KG      Germany
Sep 05, 2012 Copper add-on module for EPLAN Pro Panel Professional enables design, configuration, and virtual assembly of control cabinets as well as necessary busbar systems. Information from Rittal Power Engineering planning tool can be utilized to fit necessary Rittal system components into virtual 3D model. Module allows planning of various components based on Ri4Power solution from Rittal or RiLine60 modular busbar system and TS 8 control cabinet.

Endress + Hauser Inc.    Greenwood, IN 46143
Sep 05, 2012 Using 2 pressure sensor modules connected electronically to single transmitter, Deltabar FMD72 eliminates impulse lines or capillaries and related issues such as leaks, condensation, icing, and plugging. One sensor measures hydrostatic pressure, while second sensor measures head pressure, and transmitter calculates differential pressure. Operating in process temperatures from -40 to 257ºF, sensors offer 0.075% accuracy over measuring range of -15 to 150 psi. Accuracy of entire system is 0.1%.

CRAIC Technologies Inc.    San Dimas, CA 91773
Sep 05, 2012 Spectral Surface Mapping(TM) (S2M(TM)) lets Perfect Vision(TM) microspectrophotometer users map spectral variation of surfaces of samples with microscopic spatial resolution. Surface profiles can be created using UV-visible-NIR transmission, absorbance, emission, fluorescence, and polarization microspectral data. Used with microspectrometers with programmable stages, solution lets user automatically take spectral measurements with user-defined mapping patterns that reach to limits of stage itself.

Akro-Mils, A Myers Industries Co.    Akron, OH 44301
Sep 05, 2012 Combining louvered panel convenience and strength with inclined pick rack utility, Lean Panel(TM) features 15° angle that fosters visibility as well as access to parts and supplies stored in AkroBins®, InSight® Ultra-Clear Bins, and ProHANGER®. Angled louvered panels keep older product toward front of bins (FIFO) and accommodate productivity initiatives such as 5S Lean, Kanban, or JIT. With 90 lb capacity, panels are made of 16-gauge steel with 20-gauge end caps.

Moore Industries International, Inc.    North Hills, CA 91343
Sep 05, 2012 Certified by exida for single use in Safety Instrumented Systems up to SIL 2, Model SRM accepts single contact closure inputs from logic solver trip outputs. With 3 contacts per alarm input, SRM allows for addition of alarm contacts to safety processes without special installation or configuration. Force Guided Relay avoids possibility of contacts becoming stuck in both NO and NC positions simultaneously. Housed in aluminum DIN case, unit includes LED lights for input, output, and power status.

STEUTE Xtreme    Ridgefield, CT 06877
Sep 05, 2012 Suited for use in Ex Zones 1/21 and Zones 2/22, Series Ex STM295 solenoid-latching, keyed safety interlock switches feature 2 NO and 2 NC contacts and are available in power-to-lock as well as spring-to-lock designs. These c CSA us-certified, IEC Ex- and ATEX-rated switches, when used with safety relay module, satisfy Performance Level e (EN ISO 13849) and SIL 3 (per EN 61508). Life expectancy exceeds 500,000 operations.

PolyScience Div. Of Preston Industries Inc.    Niles, IL 60714 4588
Sep 05, 2012 Designed to replicate temperature fluctuations associated with beverage packaging, transportation, and storage, 75 Liter Refrigerated Circulating Bath features -20 to +100°C working temperature range, ±0.005°C temperature stability, and 1.8 ft³ reservoir. Programmable touchscreen controller displays temperature to 1/1000th of 1° and allows endless array of thermal cycling options and programs. Communication options include USB A/B, Ethernet, RS232, and addressable RS485.