ADDER CORPORATION    Newburyport, MA 01950
Nov 29, 2007 Available in 3 models, AdderLink X200 USB KVM extender is designed for use in applications where up to 2 computers can have their keyboard, video, audio, and mouse control extended up to 1,000 ft across CAT5 or higher UTP cable. Integrated 2-port KVM switch supports resolutions up to 1,920 x 1,200, 44.1 kHz digital stereo Hi-Fi audio, USB emulation, and country code reporting. For optimal video quality/setup, solution offers skew correction, video compensation, and DDC.

NEC Electronics    Santa Clara, CA 95050
Nov 29, 2007 Featuring clock speeds up to 800 MHz, UX8GD eDRAM (embedded dynamic random access memory) offers power levels suited for use in consumer electronics. Also available, UX8LD eDRAM exhibits leakage-current levels that help minimize power consumption in mobile handsets and other portable devices. Both solutions combine 40 nm CMOS process technology with eDRAM process technology, are available in memory configurations up to 256 Mb, and feature cell size of 0.06 µm².

Grayline, Inc.    Waukesha, WI 53188
Nov 29, 2007 Manufactured to dimensional requirements, HF100 polyolefin-based flexible tubing has operating temperature range of -30 to +90°C and is suited for applications in which fire safety is of concern. Recyclable product is flame retardant and emits minimal levels of non-toxic smoke if ignited. Additionally, any gases emitted in event of fire are minimally corrosive. Offered in standard and custom colors, tubing is Pb-free and RoHS-compliant.

GE Intelligent Platforms    Charlottesville, VA 22911
Nov 29, 2007 Designed for NEBS compliance, Telum(TM) NPA 58x4 intelligent 4-port Gigabit Ethernet IP Packet Processor AdvancedMC(TM) enables secure connectivity and complex security processing for content-aware applications that need wire-speed performance. Solution is built around 600 MHz Cavium OCTEON(TM) CN5850 multi-core Secure Communications Processor and features up to 1 GB DDR2 memory. This combination enables delivery of up to 4 Gbps line-speed packet processing for Layers 2-7.

Dynabrade, Inc.    Clarence, NY 14031
Nov 29, 2007 Available in vacuum and non-vacuum models with 3-6 in. dia, Dynorbital Spirit provides users with 12,000 rpm air tool that features built-in muffling system which reduces sound levels to 76 dB(A). Comfort Platform provides hand and wrist support for tool operator while protecting hand from contact with air coupler and connector as well as air exhaust. Vibration-absorbing grip is shaped to conform to user's hand, and throttle lever is recessed into housing to eliminate pinch points.

Freescale Semiconductor    AUSTIN, TX 78735-8598
Nov 29, 2007 Capacitive touch sensor controllers MPR083 (rotary interface applications) and MPR084 (touch panel control applications) detect presence of objects without physical contact. Along with configurable real-time auto calibration, they support multiple electrodes for multiplexing capabilities. Complimentary proximity sensing software, derived from touch-sensing algorithm, facilitates integration into control applications using Freescale 8-bit S08 and 32-bit ColdFire® V1 MCUs.

Dymax Corp.    Torrington, CT 06790
Nov 29, 2007 Designed for UV curing of adhesives and coatings from left, right, and/or top, UVCS SideCure(TM) can be outfitted with up to 8 DYMAX 5000-EC UV curing flood lamps, which provide 225 mW/cm² of intensity. Conveyor's 12 in. wide belt, 7.5 in. vertical clearance, and 5 in. side-curing capability allow for curing of large parts. Conveyor system is suited for bonding, masking, and coating applications in medical, electronic, industrial, and aerospace industries.

SolidCAM    Croydon, PA 19021
Nov 29, 2007 Along with automation features and interactive CAM functions, InventorCAM 2008 offers single-window UI and full associativity between CAD model and NC tool path to promote efficient flow from 3D design model to machined part. Automatic Feature Recognition and Machining capability is provided for multiple drills and complex holes, including 2.5D pockets. Solution also supports machines capable of simultaneous 5-axes and multisided milling as well as turning.

Software602, Inc.    Jacksonville, FL 32216
Nov 29, 2007 Integrated collaboration and messaging solution for Microsoft Windows, 602LAN SUITE 5 Groupware incorporates email, public folders, contacts, and online document sharing into browser-based interface offering access to all groupware functionality from anywhere using standard web browser. SMTP server provides multilayered approach to fighting spam that includes Directory Harvest Attack protection, Bayesian filtering, email per hour quotas, reverse DNS verification, and DNSBL.

Novell    Waltham, MA 02451
Nov 29, 2007 Novell® Identity Manager Roles Based Provisioning Module delivers identity/security management by allowing IT managers establish access privileges to resources including applications, telephone systems, and building security systems based on role membership within organization. Permissions are managed according to departments, jobs, or specific tasks assigned to any person, minimizing amount of IT administration required to add, delete, or maintain system users' access rights.

J. W. Winco, Inc.    New Berlin, WI 53151
Nov 28, 2007 Measuring ½ in. diameter and available in variety of lengths, Stainless Steel Adjusting Rods are mounted in cross block, which allows both horizontal and vertical positioning of rods. Various styles are available, including blank, grooved, tapped, and milled flat. Applications include conveyors, conveying systems, and various types of equipment in packaging, pharmaceutical, automation, and material handling industries.

Norwood Marking Systems, A Div. Of ITW    Downers Grove, IL 60515
Nov 28, 2007 Intermittent motion 53LTi offers print area of up to 2.08 in. wide x 1.18 in. long, while continuous motion 53LTc has print area of up to 2.08 x 1.97 in. and can print at speeds of up to 400 mm/sec. Rugged, compact printers offer 600 m ribbon capacity; can print fixed and variable data; and allow text, graphics, and barcodes to be printed horizontally and vertically. With single connection point, 2-component units include operator keypad and Windows-based label design software.

ITW Plexus    Danvers, MA 01923 3712
Nov 28, 2007 Two-part 1:1 structural methacrylates are non-sagging gels that dispense manually or with standard meter-mix equipment. They are available in 400 ml cartridges, 5 gal pails, and 50 gal drums. With working time of 30-40 min, MA530 Plexus® structural adhesive fills gaps up to 0.70 in., while MA560-1 offers working time of 55-70 min and fills gaps up to 1.00 in. Formulated for building large fiberglass boats, MA590 has working time of 90-105 min.

Linear Technology Corp.    Milpitas, CA 95035
Nov 28, 2007 Housed in 11.25 x 9 x 2.8 mm LGA surface mount package, Models LTM8022 and LTM8023 are 1 A and 2 A DC/DC uModule(TM) regulators with 3-36 V input operation that can regulate output voltage from 0.8-10 V with one resistor. Units include dc/dc controller IC, power switches, inductor, compensation circuitry, and input and output bypass capacitors. Rated for -40 to 85°C operation, RoHS-compliant devices are encapsulated for protection against mechanical, chemical, and ambient factors.

Cooper Hand Tools    Raleigh, NC 27612
Nov 28, 2007 Designed to capture particles and pollutants produced by soldering process, Weller Model WFE2ES is suited for solder baths, hot air soldering, micro soldering, and adhesive applications. Compact filter system consists of F5 class fine-dust filter and Puratex H12 HEPA filter with active carbon. Brushless, maintenance-free turbine provides effective removal of pollutants from air while offering low noise emission of 55 dBA.

Weed Instrument Co., Inc.    Round Rock, TX 78680
Nov 28, 2007 Utilizing Downstream Multicasting technology, EOTec 2C31 and 2C32 are single and dual self-healing ring modules that provide multiple communication paths between various elements of control system. Downstream Multicasting transmits incoming message in multiple directions and insures that, while directing message toward all nodes in ring, it is never retransmitted back to point of origin. Housed in DIN-rail enclosures, fiber optic modules include local and remote diagnostic tools.

C&K Components    Newton, MA 02458
Nov 28, 2007 Able to withstand actuation force from 4-40 N, top-actuated K5AT Series provides 3-way see-hear-touch effect with audible click, sharp tactile feel, and visual recognition via LED. Illuminated, surface mount units are RoHS-compliant with gold-plated dome contacts and operating life of 100,000 cycles. Measuring 8.0 x 8.4 x 6.1 mm, switches are suited for telecom and network infrastructure, server and storage reset buttons, medical monitoring equipment, and electronic panels.

Xspect Solutions Inc.    Wixom, MI 48393
Nov 28, 2007 Used as touch probe or scanning CMM, X-Checker has max 3D measuring speed of 700 mm/sec with max acceleration of 2,000 mm/sec² and measuring range of 750 x 1,000 x 500 mm. Machine includes frictionless bearings, pneumatic counterbalance, and X-shaped base cast from polymer mineral resin. Guideways are covered with machine tool bellows that protect ballscrews from dirt and contamination, while CNC controller, electronics, and PC are mounted inside lockable cabinet located under base.

Midwest Tool & Cutlery Co.    Sturgis, MI 49091
Nov 28, 2007 Duct Tightener tool allows one person to connect duct runs by tapping tool into place while V-notch pulls and holds duct together for drive cleat insertion. Manufactured with 16 ga SS, tool features rust-resistant zinc coating. Compact unit fits into tool belt and V-notch accommodates varying duct run gaps and end tabs.

Parker Hannifin Corp.    Oxford, MI 48371
Nov 28, 2007 Meeting compact installation requirements, P1G Series can be screwed into bores in tools or machine stands where they virtually disappear. Units are supplied with one piston rod nut and two lock nuts for installation. Available in 6, 10, and 16 mm bore sizes, single acting cylinders offer choice of 5, 10, or 15 mm stroke length; working pressure from 2-7 bar; and operating temperature of -20° to +80°C. Cylinders are corrosion resistant and designed for non-lube operation.