Bosch Rexroth Corp.    Hoffman Estates, IL 60192
Dec 06, 2007 Available in sizes of 15 and 25, eLINE Cam Roller runner block for eLINE profiled rail systems provide quiet transport of light loads at speeds up to 12 m/sec. Users can choose between runner blocks in standard length with 4 cam rollers, or short runner blocks with 2 cam rollers. Aluminum eLINE profiled rail system compensates for tolerance errors and unevenness in mounting surfaces. Rails can be mounted from above/below and come in one-piece lengths of up to 4,000 mm.

Ironwood Electronics, Inc.    St. Paul, MN 55121
Dec 06, 2007 Designed for ST Micro 35 mm and 27 mm package sizes, Models SG-BGA-6245 and SG-BGA-6246 operate at bandwidths up to 8 GHz with less than 1 dB of insertion loss, dissipate up to 4.5 W at 40°C, can handle up to 100 W with heat sink, and have 23 mW/pin of contact resistance. Constructed with low inductance elastomer, they feature temperature range of -35 to +100°C, 10.15 nH pin inductance, and 0.10 pF of capacitance to ground.

ARM Ltd.,    Sunnyvale, CA 94085
Dec 06, 2007 Cortex-M1 Development Kit enables integration of ARM processor technology with Altera Cyclone III FPGAs using Altera Quartus II design software and Altera SOPC Builder tool, together with ARM RealView® Microcontroller development Kit software development environment. It includes encrypted version of ARM Cortex-M1 processor and special edition of ARM RealView Microcontroller Development Kit, including compiler, debugger, and RTX RTOS.

Advanced Analogic Technologies Inc.    Sunnyvale, CA 94085
Dec 06, 2007 Offering internal soft-start, over-temperature, and current limit protection, Models AAT2120 and AAT2158 switching regulators have operating temperature range of -40 to +85°C and deliver low spectral noise and output ripple. Both units operate from input range of 2.7-5.5 V and support output voltages as low as 0.6 V. Offered in 8-pin 2 x 2 mm STDFN package, Model AAT2120 supplies up to 500 mA output current. Model AAT2158 delivers up to 1.5 A and comes in 16 pin 3 x 3 mm QFN package.

ARM Ltd.,    Sunnyvale, CA 94085
Dec 06, 2007 Based upon Cortex(TM)-M3 processor, ARM® SecurCore® SC300(TM) is designed for embedded security and contactless and USB smart card applications including Smart Card Web Server (SWCS) and Near Field Communication (NFC). Low power consuming unit offers fully featured debug facilities and tools to help smart card OEMs speed software development. It features code efficiency of Thumb®-2 instruction set architecture and real-time handling of multiple interfaces.

Infineon Technologies AG Dep. CIC MC      Germany
Dec 06, 2007 Including Models XC2766X and XC2786X, Series XC2700 32-bit MCUs are based on C166SV2 core, providing single cycle execution from 66 MHz 5-stage pipeline at up to 80 MHz. Units integrate up to 768 Kb of 130 nm embedded flash, 64 Kb of data flash, and 51 Kb of system RAM. MCUs come with analog-to-digital converter with 16-24 channels for linking directly to sensors, 2 CAN interfaces, and Universal Serial Interface to link to external peripherals via UART, LIN, or I2C interface.

Infineon Technologies AG Dep. CIC MC      Germany
Dec 06, 2007 With ability to control up to 4 individual motors simultaneously, XE166 family integrates MCU that combines 16-bit C166 core for peripheral control with computing power of DSP. Operating at 80 MHz and one cycle per instruction, units deliver 80 MIPS. Controllers include embedded voltage regulator, various clock sources, brown-out detection, watchdog as well as 2 synchronizable A/D converters with 24-channels, 10-bit resolution, and conversion time of less than 1.2 µsec.

TEGAM, Inc.    Geneva, OH 44041
Dec 06, 2007 Designed to expand measurement range of PXI digitizers and analog inputs, Model 4040A 50 MHz PXI Instrumentation Amplifier offers 100 V differential common mode inputs with 70 dB of CMRR. It comes with VISA compliant drivers for LabVIEW8, Microsoft C++, and Visual Basic. Interactive front panel VI provides manual control of all of board's features. Unit features ac/dc coupling, 1 MO and 50 O input impedance, 50 O output, and programmable offset and attenuation/gain.

Moore Industries International, Inc.    North Hills, CA 91343
Dec 06, 2007 Requiring 10.5 mA to operate, programmable Model TFZ allows up to 32 field devices (126 with repeaters) to be networked onto one FOUNDATION Fieldbus H1 segment. It has 20-bit input resolution, RFI/EMI protection, ambient temperature compensation, and operates in -40 to +85°C temperatures. Rated NEMA 4X/IP66, TFZ can be set from control room over segment wiring to handle 14 RTD types, 9 thermocouple types, as well as direct mV and resistance/potentiometer inputs.

Birchwood Casey    Eden Prairie, MN 55344 2138
Dec 05, 2007 Intended for copper, brass, and bronze surfaces, PATINA GREEN(TM) liquid achieves 2 different types of finishes. For bright green or mint green finishes, product can be applied directly onto surface using brush, dipping, or spray. For slightly muted tones that are somewhat opaque, solution can be applied as secondary treatment over top of brown or black colored base coat. PATINA GREEN comes in 1, 5, and 55 gallon containers.

Hypertronics Pte Ltd    #06-3514 Tai Seng Ind Estate   Singapore
Dec 05, 2007 Suited for welding, marking, cutting, drilling, and surface treatment, ScanVision Laser System incorporates vision camera system, in-line with laser beam path, through galvanometers beam positioning system. Real-time vision compensation for work piece drift is accurate to a few microns tolerance and can be achieved in milliseconds. In-situ post process inspection and 2D code mark verification is done in one compact module.

Elan Digital Systems Ltd    Fareham Hampshire PO15 5SJ  United Kingdom
Dec 05, 2007 Providing RS232 connection, Model CF500 allows serial devices that require full 5 Vdc to be run from portable hosts, such as PDAs, which usually only supply 3.3 V through compact flash bus. Even when host input voltage is 3.3 V, card offers steady 5 V at 100 mA on pin 9, meaning peripherals can be powered without additional supply. Card automatically configures to become another COM port by using built-in OS drivers optimized for Windows, LINUX, and Mac.

Schunk    Morrisville, NC 27560
Dec 05, 2007 Available in sizes from 64-160, JGZ 3-Finger Grippers feature large piston, wedge-hook kinematics, and T-slot guidance, achieving gripping forces from 130-1,819 lbf. Stroke adjustment range is 0.24-0.63 in. per finger. For position monitoring, grippers can be fitted with solenoid switches or inductive proximity switches. Range of accessories is available, including pressure maintenance valves, finger blanks, and fittings, as well as quick-change jaw system.

Emerson Network Power    St. Louis, MO 63136
Dec 05, 2007 With 40-72 Vdc input range, Models DS450DC, 550DC, 650DC, and 850DC have output power ratings of 450, 550, 650, and 850 W, respectively. They produce +12 Vdc output, together with auxiliary always-on +3.3 Vdc output for applications that require standby operation. All modules offer active single-wire current sharing, which operates from 10-100% of full load. Featuring 1U x 2U form factor, units are hot-pluggable and incorporate low-loss internal ORing FETs on main 12 V output.

Thomas & Betts Corp.    Memphis, TN 38125
Dec 05, 2007 Designed to help meet NEC 406.8 (B) code requirements for wet locations, Red Dot® Weatherproof While-in-Use Kits come with lockable cover, outlet box, 20 A/125 Vac GFCI receptacle, gasket, plugs, mounting lugs, screws, and sealant. Covers are made of high-impact, UV-resistant polycarbonate or corrosion-resistant, die-cast aluminum. Non-metallic cover can be installed vertically or horizontally, while metallic cover is designed for vertical use only.

Western Enterprises    Westlake, OH 44145
Dec 05, 2007 Able to handle up to 450 A continuously (100% duty cycle) and 600 A at 20% duty cycle, Magnetic Activated Ground provides freedom of motion to welder by allowing 360º ground cable rotation when in locked position. Built-in on/off switch activates magnet, providing ground close to weld, and ergonomic curved body permits one-handed operation. Debris is removed by switching unit off and wiping surface clean with 2 built-in scrapers. Integral pipe boot allows for ID/OD pipe applications.

Bessam Aire, Inc.    Cleveland, OH 44139
Dec 05, 2007 Measuring 48 in. high, KUBE(TM) Low Profile Evaporative Coolers employ FreshWater(TM) slinger wheel technology, which evenly distributes evaporative atomized water across entire air inlets. Evaporative cooling pads are eliminated, minimizing airborne pathogens, mold spores, and odors. Providing 3,000-30,000 cfm with variable speed control, units come with network capability. Heating can be provided via indirect heat exchanger up to 400,000 BTUs per unit.

B & K Precision Corp.    Yorba Linda, CA 92887
Dec 05, 2007 Built with synthesizer-based design, PC-compatible Model 2652 is suited for engineers and technicians who perform field measurements in 50 kHz to 3.3 GHz range. Included tracking generator can be used to determine transmission characteristics of 2-port RF devices. Featuring one-button auto tuning, portable unit is capable of measuring channel and adjacent channel power, occupied bandwidth, electric field strength, and magnetic field strength measurements.

Crystal Engineering    San Luis Obispo, CA 93403
Dec 05, 2007 Intrinsically safe and ATEX certified, wet/wet Model XP2i-DP features burst disc that protects sensor from over-pressure on low side connection. Digital gauge provides datalogging capabilities and can be programmed for custom engineering units. Available in panel mounting and portable configurations, unit is tested and calibrated inside environmental test chambers using computer-controlled pressure controllers.

Applied Kilovolts Ltd    Portslade East Sus BN41 1PB  United Kingdom
Dec 05, 2007 Housed in steel case to minimize radiated magnetic field, LS Series provides power outputs up to 1 W and voltages up to 30 kV. Throughout LS family, ripple is below 1 ppm, temperature coefficient is less than 10 ppm/°C, while drift is as low as 50 ppm/hr. All units include differential control input, and are short circuit and flashover proof. Applications include mass spectrometers, electron microscopes, photomultiplier tubes, and microchannel plates.