Thermal Ceramics, Inc.    Augusta, GA 30903
Feb 04, 2008 Kaolite 2000-LI can be gunned or pumped into place for high temperature industrial processes. With its low iron oxide content, product can be used in carburizing furnaces or where high concentrations of CO gas are present. Strength-to-density ratio ranges from 11 to 12 psi/pcf. Low k values along with high cold crushing strengths of 450 psi at densities of 38-41 pcf provides insulation and thermal efficiency to reduce energy costs.

Ready Jet, Inc.    Tampa, FL 33637
Feb 04, 2008 Eliminating task of manually chipping hardened concrete buildup from inside concrete mixer drum, Ready Jet(TM) lets operator stand on trailer's observation platform and maneuver cleaning arm inside mixer drum via wireless radio remote control. High-pressure water-blasting nozzle safely removes residual hardened concrete from mixer drum interior without damaging shell, blades, or exterior paint. Pump can also power handguns for water blast cleaning other equipment.

Bry-Air Inc.    Sunbury, OH 43074
Feb 04, 2008 Consisting of standard modules with double-wall construction, BryPAC® is available in 9 sizes from 1,200-24,000 cfm. Unit includes relay logic controls, quick removal panels, and hinged access doors, which facilitate maintenance. Available for indoor/outdoor use with wipe-down or wash-down construction options, dehumidifier is suitable for industrial process temperature and humidity control for processes requiring dew point humidity below 45°F.

Bayer MaterialScience, LLC - Coatings, Adhesives & Sealants    Pittsburgh, PA 15205
Feb 04, 2008 Used as base resin in solvent-free sealant, Desmoseal® S XP 2636 silane-terminated polyurethane prepolymer eliminates bugholes in concrete surfaces. Product cures with moisture from air, or from substrate to which it is applied. Finished product will not foam in presence of water, and provides optimal UV stability as well as adhesion to concrete. Sealant can be used on any concrete surface that has been poured into mold including concrete basement and retaining walls.

Envirosight LLC, Video Pipeline Inspection    Randolph, NJ 07869
Feb 04, 2008 Featuring 216:1 zoom, onscreen distance measurement, and HID lamps, QuickView® pipeline camera lets users inspect underground infrastructures while capturing and displaying video at up to HD resolution. Video display/recorder features 7 in. color LCD and can double as real-time ADC between any external video source and PC. Targeting leg allows stable, precise inspections of drop lines, and pole extensions are available. Solution captures video as far as 250 ft down lines 8-60 in. dia.

Hickory Hardware    Portland, TN 00000
Feb 04, 2008 Faultless Marquee M700 Series features precision-bearing, glass-filled nylon wheel to absorb impact and each caster is zinc-plated and equipped with riveted axle for durability. With capacity of 275 lb, casters are maintenance-free and resistant to water and most chemicals, solvents, oils, grease, and salt. They can also be custom-branded with company logo and colors.

Standard & Poor's    New York, NY 10004
Feb 04, 2008 Available as module of web-based RatingsDirect®, CreditStats Direct(TM) supplies clients with financial statement data, as adjusted by Standard and Poor's ratings analysts to use in credit analysis. It includes financials and ratios for North American and European rated Corporate and Utility entities. Six categories of information include key stats and ratios, income statement, balance sheet, cash flow statement, capital structure, and supplemental financials.

Lighting Services Inc    Stony Point, NY 10980
Feb 04, 2008 Made from die cast aluminum, GR Series fixtures include designs for both MR16 and AR111/PAR36 lamps. They are integrated with recessed transformer, which disappears into track to create clean, architectural appearance. Series GR16 features internal accessory clips, Pyrex safety shield, and tool-less lamp ring for relamping of all MR16 lamps from 20-50 W, while GR36 Series features Quick Connect socket for tool-less installation of both PAR36 and AR111 lamps, up to 75 W.

Tyco Electronics/Raychem.    Menlo Park, CA 94025-1164
Feb 04, 2008 Providing resettable overcurrent protection for passenger vehicle and heavy truck wire harnesses, PolySwitch BD280 bladed device has 2.8 mm form factor to facilitate one-to-one replacement of mini-sized fuses and Type II bimetal circuit protection devices in 12 V vehicle systems. Rated for operating temperatures between -40 and +125ºC, device provides constant power consumption across 4-14 V voltage range, and is available in current ratings of 10, 15, 20, 25 and 30 A.

Honeywell, Inc., Industrial Automation & Control    Phoenix, AZ 85023
Feb 01, 2008 Using electrochemical sensors, Model X5 simultaneously monitors up to 5 gases including VOCs, while single-gas Model XD monitors range of toxic gases at ppm levels and % oxygen concentration. Both units are protected against water and dust ingress and include multi-language support, datalogging, backlit display, and alarms. Up to ten XD/X5 units can be connected to optional MicroDock II docking station, which offers automatic 1-touch calibration/bump testing/data transfer and record keeping.

FluxData, Inc.    Rochester, NY 14623
Feb 01, 2008 Suited for applications in laboratory and on factory floor, FD-1840 series has no moving parts and delivers NIST-Traceable results. Systems are comprised of hand-held spotting scope, VIS/NIR corrected lens, spectrometer, and software. They measure spectral radiance, luminance, spectral irradiance, illuminance, radiant intensity, CCT, Loaobo, Louovo, and XYZ. While FD-1840+ covers 380-1,000 nm wavelength, FD-1840QE covers 385-765 nm range.

Pulse Engineering, Inc.    San Diego, CA 92128
Feb 01, 2008 Installed with plug-in connections, Excelsus B-V175 twisted pair-to-coaxial balun allows DSL or home phoneline networking frequencies to be transmitted from twisted pair to coaxial mediums, and vice versa, to support VDSL2 and HomePNA(TM) deployments. Passive electronic device matches 100 W twisted pair cable to 75 W coaxial cable without degrading signal. It can pass frequencies from 25 kHz to 30 MHz with less than 1.5 dB insertion loss.

EGS ELECTRICAL GROUP ? APPLETON    Rosemont, IL 60018
Feb 01, 2008 Protected from water, dust, oil, grease, fumes, and other hostile contaminants, liquidtight ST Series is available pre-assembled with integrated KO sealing ring. Cable and conduit connectors are made from bar stock steel or malleable iron with small turning radius for installation in tight spaces. Offered in 3/8-5 in. sizes in straight, 45°, and 90° configurations, connectors feature crimpable ferrule to secure mechanical grounding and deep ferrule threads that prevent pullout.

Futek    Irvine, CA 92618
Feb 01, 2008 Featuring all-welded stainless steel measuring cell for media compatibility, Model PMP410 is suited for applications subject to severe mechanical shock, vibration, and EMI. Case is also made of stainless steel and is available with protection rating up to NEMA 4/IP67. Standard signal output of 4-20 mA or 5 Vdc allows sensor to be integrated into existing applications. Using piezo-resistive measuring cell, sensor offers pressure ranges up to 300 psi.

JTM Products, Inc.    Solon, OH 44139
Feb 01, 2008 Combining qualities of synthetics with those of soluble oils, KoolRite(TM) 2580 provides light oily residual film that lubricates and protects machine components. Non-foaming coolant helps prevent rust and will not split or separate. Formulated with Bio Armor(TM) technology, product is resistant to bacterial and fungal growth. It is suited for machining high-temperature and high nickel alloys, stainless steel, titanium, aluminum, and exotic metals.

Hardigg Industries, Inc.    South Deerfield, MA 01373
Feb 01, 2008 Used in warehouse and on manufacturing floors, VersaFill stackable containers are suited for storing and transporting items such as plastic pellets and other bulk components. Each 45 x 45 x 44 in. container, available in 14 colors, may be used in contact with food and is built to survive years of use as well as withstand impacts, drops, and forklift encounters. Optional liner provides smooth interior surface for facilitated removal of fine-grained items.

Meggitt (Maryland), Inc.    Germantown, MD 20876
Feb 01, 2008 Offering connection integrity critical for inaccessible sensor locations, 787F low-profile (1.23 in.) accelerometer has permanently mounted, integral cable that eliminates contaminant permeation concerns as well as those pertaining to connector backing off sensor. Fully welded construction, permanent Viton® boot, and Teflon®-jacketed cable lend to resistance against harsh operating conditions. With 100 mV/g sensitivity, ESD-/EMI-/RFI-protected sensor has 80 g peak acceleration range.

Linear Technology Corp.    Milpitas, CA 95035
Feb 01, 2008 Available in 2 x 2mm DFN and SC70 packages, LTC4311 is designed for heavily loaded I²C/SMBus systems operating at bus speeds to 400 kHz. It uses boosted pull-up current of 5 mA during rising bus transitions while disabling current sources during falling transitions and logic lows/highs for improved low state noise margins. Operating from 1.6-5.5 V, IC features 5 µA shutdown and will not cause bus loading during shutdown or when powered down.

Edwards Vacuum Technology    Wilmington, MA 01887
Feb 01, 2008 Combining turbomolecular and drag stages with fluid dynamic stage, EXT406PX allows customers to build compact vacuum systems capable of withstanding high backing pressures even with continuous gas loads at main inlet. It can sustain normal operation at backing pressure of up to 17 mbar and has protection against mains variation on backing pump. System is available in 2 ranges: ISO and CF 160 with nitrogen pumping speeds of 400 L/sec and ISO and CF 100 with pumping speeds of 310 L/sec.

Royal Products, Div. Curran Mfg. Corp.    Hauppauge, NY 11788
Feb 01, 2008 Bolt & Go(TM) mounting feature for Royal Low-Profile Accu-Length(TM) CNC Collet Chucks is defined by full contact taper/face connection between chuck body and back plate. Mounting allows chucks to be accurate to within 0.0003 in. TIR when bolted to lathe spindle nose. Chucks are available in all common spindle nose configurations and cover collet styles ranging from 5C with 1.06 in. capacity to S-40 with 4 in. capacity.