Dotworkz Systems, Inc.    San Diego, CA 92110
Mar 04, 2008 Featuring tilt-and-lock mechanism, E-Z Lock(TM) Pole Mounting System enables positioning of surveillance cameras at exact viewing angle needed to compensate for slanted poles or walls or to set camera to monitor an upward/downward application. Mount is fabricated from 18-gauge steel and compatible with all camera enclosures. Installation only requires standard screwdriver, and design accommodates 1-2.5 in. dia poles.

Lanner Electronics Inc.    Sijhih City Taipei 221  Taiwan
Mar 04, 2008 Built around Intel® 5000P chipset, Model RS12-38700 supports two Quad-Core Intel® Xeon® processors, 8 fully buffered DIMMs, and 2 PCI-Express networking modules. Dedicated onboard Vitesse RAID controller supports 12 hot-swappable SAS/SATA hard drives with RAID 0, 1, 10, and 5 data protection, while 2.5 Gbps Cavium encryption engine offloads layer 4 processing to minimize CPU load. Appliance also supports 2 network modules and up to 8 Gb fibre or copper ports.

Video Products Inc.    Aurora, OH 44202
Mar 04, 2008 Compatible with USB 2.0 Windows Vista, bus-powered Data Transfer Cable offers way to transfer files from Windows 95/98/2000/ME/XP/Vista operating systems to Windows XP or Vista system. User loads software and plugs cable into each USB-enabled computer to start file transfer process. Included software provides interface that allows dragging and dropping files or folders from local computer to linked PC.

Data Protection Solutions by Arco (DPS)    Hollywood, FL 33020
Mar 04, 2008 Run under Windows XP/2000/2003/Vista, EzMigration aids in copying boot drive to new or larger drive. It performs bit by bit drive copy, transferring exact image of entire original drive to new one, and eliminates all work involved in building/rebuilding boot drive by installing one application at a time. It also includes drive partition expansion utility.

Omega Engineering, Inc.    Stamford, CT 06907
Mar 04, 2008 Available with stainless steel or Ni-brass housing, E57 sensors operate from 10-30 Vdc and incorporate short circuit as well as reverse polarity protection. These 3-wire devices, compatible with pick and place operations, conveyance systems, automotive, and general factory automation, suit various applications with limited space for mounting sensors. Examples include automated product testing, robotics, machine tooling, as well as counting and sorting applications.

Omega Engineering, Inc.    Stamford, CT 06907
Mar 04, 2008 Supplied standard with flexible silicone rubber cable, penetration-style stainless steel probe, and stainless steel body, reusable Model OM-CP-HITEMP-150FP features programmable start time and real-time operation. Accompanying Windows software provides data analysis, while extended temperature range enables use in autoclaves, medical and pharmaceutical labs, and food preparation and processing plants. NIST Calibration certificates are available.

BI Technologies Corp.    Fullerton, CA 92835-1051
Mar 04, 2008 Measuring 7.4 x 7.2 mm with height of 5.0 mm, HM69T Series features inductance values of 90, 100, and 150 nH, with rated dc current of 57, 52, and 27 A, respectively. DCR tolerance is ±3%, with typical DCRs of 0.298 mW. Operating from -40 to +125°C with max temperature rise of +40°C, inductors are suited for high-volume power supply applications, such as voltage regulators and power circuits for central processing units.

Aitech Defense Systems Inc.    Chatsworth, CA 91311
Mar 04, 2008 Suited for tactical avionics platforms, single-width Model M705 features up to 5 dual-channel, dual-redundant MIL-STD-1553B channels; 16 ARINC-429 receive channels and 8 ARINC-429 transmit channels; up to 6 RS-232/422/485 serial channels; and 8 opto-isolated digital discrete input channels. Card's 32-bit/66 MHz PCI 2.2 interface supports both +5 and +3.3 V PCI universal signaling levels. Operating from -55 to +85°C, PMC offers optional ARINC 708 Weather Radar interface.

Copley Controls Corp.    Canton, MA 02021
Mar 04, 2008 Featuring hardened design, panel mounting Accelnet Series R20 provides networking and stand-alone motion control for brush and brushless motors, as well as direct drive linear motors and actuators. Units deliver 3.200 kW peak power; 9, 18, and 36 peak currents; and operating voltages of 55, 90, and 180 V. Housed in shielded enclosures measuring 6.6 x 3.9 x 1.2 in., drives include Command, Encoder Feedback, and Communications interfaces, allowing single model to work in differing systems.

TE Connectivity Ltd.    Berwyn, PA 19312
Mar 04, 2008 Intended for VPX applications, MULTIGIG RT Connector Modules support data rates of 10+ Gb/s. Allowing 3U and 6U configurations, VPX maximizes I/O, offering density of 113 contacts per inch. In 6U system, connectors provide up to 160 high-speed differential pairs, each running at 6.25 Gb/s. Optical modules accommodate optical interconnection schemes used in military and aerospace applications, including Expanded Beam, LuxCis optical termini, and MT ferrules.

Bayer MaterialScience, LLC - Coatings, Adhesives & Sealants    Pittsburgh, PA 15205
Mar 04, 2008 Formulated specifically to protect metal or concrete industrial roof systems, Baytec® SPR 185A FR is certified for use in high-velocity hurricane zones and has passed UL790 test for fire resistance of roof covering materials. Spray system stands up to demanding environments and offers resistance to ozone, hydrolysis, and many chemicals. Because it is spray applied, Baytec SPR 185A FR eliminates time-consuming application process of rolled sheet.

GE Co., GE Consumer Products    Louisville, KY 40225
Mar 04, 2008 Built for industrial environments, AC Series 9000 large synchronous bracket bearing and pedestal bearing machines are available based on application requirements. Both employ insulation system, available for fixed or adjustable speed applications, that minimizes effects of localized electrical stress and partial discharge. Available up to 1,800 rpm, 4- and 6-pole solid salient rotor is constructed with integral pole tips and has single-forging design.

Emerson Process Management Dieterich Standard Inc.    Boulder, CO 80301
Mar 04, 2008 Tested with crude oil as well as other liquid and gas hydrocarbons, Micro Motion® ELITE® High Capacity Coriolis meter addresses demands of fiscal custody transfer applications. Unit has max flow capacity of 2,250 tons/hr and is not subject to wear or performance drift. Suited for measurement applications requiring 10 or 12 in. process connections, meter combines compliance to API, OIML and NMi standards with multiple local custody transfer approvals.

General Air Products, Inc.    Exton, PA 19341
Mar 04, 2008 Industrial-grade chillers, built with components designed for varying loads and frequent cycling, ensure linear accelerators used for treating patients are properly cooled to promote operational precision. Closed-loop chiller internally recycles clean chiller water to eliminate constant use of city water. This minimizes linear accelerator maintenance by preventing pollution of internal heat exchanger.

Metallized Carbon Corp.    Ossining, NY 10562
Mar 04, 2008 Metcar grades M-161 and M-162 are carbon/graphite Babbit impregnated materials that impart bearings and thrust washers used in submerged and dry environments with wear resistance and continuous lubrication for their service life. Bearings manufactured from these completely homogenous materials are self-lubricating, non-galling, and dimensionally stable. They will not score mating shaft and can operate in low-viscosity fluids such as water and fuels.

Centricity    Girard, OH 44420
Mar 04, 2008 Designed for MS Series line of programmable indexers and AccuRing Rotary Tables, GEN-2 control software allows indexer setup and configuration from touchscreen. It features individual electronic torque control for motion and dwell and allows fine tuning of home position even while indexer is running. Advanced recovery routines with 8 selectable motion sequences restore indexer position following jam or fault. Software supports various communications protocols.

ACS Motion Control    Plymouth, MN 55447
Mar 03, 2008 Designed for multi-axis motion control, rack-based Model MC4U can control up to 8 rack servo drives and 64 distributed axes via CANopen. Modular unit integrates controllers, drives, power supplies, and additional I/O and networking capability. PWM drive blocks feature current loop digital control for smooth constant velocity, while linear drives eliminate jitter, and 3-phase motor filters minimize common mode and differential mode noise.

m&h UK    Nottingham NG9 6NG  United Kingdom
Mar 03, 2008 Based on type 41.00 probe, hard-wired, real-time Touch Probing System allows sliding-head CNC lathe users to measure turned and milled features on every component after machining, while it is still in counter spindle and before ejection. Gauging arrangement, which employs fixed probe mounted on headstock, is also suitable for use on fixed-head, bar-fed, twin-spindle turning machines. Tolerances down to plus or minus a few microns can be maintained.

AGY    Aiken, SC 29801
Mar 03, 2008 Offering Vehicle Armor Composite Solutions for protection against IED and EFP threats, Featherlight(TM) glass fibers withstand severe threat levels, while Quicksilver(TM) glass fibers offer stiffer, lighter composite parts than E-glass reinforcements. Composites can be deployed in both structural and nonstructural components on suite of vehicles, enabling lightweight, fire-retardant, and load bearing structures to compete with steel and aluminum solutions.

Ceramics Process Systems    Chartley, MA 02712
Mar 03, 2008 Coolers with AlSiC (Aluminum Silicon Carbide) metal matrix composite pin fin substrates are designed for liquid-cooled, high-power module systems used in hybrid electric vehicle applications. They provide isotropic thermal expansion (8 ppm/°C) compatible with thermal expansion of IGBT die and ceramic dielectric substrates to reduce mechanically induced stresses during thermal cycling. Product also facilitates IGBT assembly by eliminating need for stress compensation layers.