Komatsu America Corp.    Rolling Meadows, IL 60008
Mar 21, 2008 Model HD605-7 features Komatsu SAA6D170E-5 turbocharged, air-to-air after-cooled diesel engine that provides net output of 715 hp, and hydraulic controlled wet multiple-disc brakes. Countershaft transmission with K-ATOMiCS selects optimum gear according to vehicle speed, engine speed, and shift position. Cab is mounted with viscous mounts to minimize noise and vibration levels, and Vehicle Health Monitoring System remotely evaluates machine's condition.

Komatsu America Corp.    Rolling Meadows, IL 60008
Mar 21, 2008 Constructed of wear-resistant steel with 400 Brinell hardness, Model HM300-2 can haul up to 30 tons at top rated speed of 36.4 mph. Loading height is 9 ft 2 in. and heaped capacity is 21.7 yd³. Hydro-pneumatic suspension in both front and rear keeps tires on ground at all times and truck has water-cooled, 4-cycle, 340 net HP EPA Tier 3 certified engine. Truck features wet-type, multiple disc brake and retarder combination, providing retarder absorbing capacity of 468 hp.

Komatsu America Corp.    Rolling Meadows, IL 60008
Mar 21, 2008 Suited for quarry, sand, gravel, and industrial applications, Model WA500-6 has 332 net hp and operating weight between 71,585-74,010 lb. Engine is EPA Tier 3 emissions certified, and WA500-6 is equipped Komtrax(TM) technology, which sends machine operating information to secure web application for analysis. General purpose bucket capacity is 7.4 yd³ and cab is mounted with viscous mounts that provide low noise and low-vibration operating environment.

Komatsu America Corp.    Rolling Meadows, IL 60008
Mar 21, 2008 Designed for quarry, sand/gravel, industrial, and small mining applications, Model WA600-6 is 118,385 lb wheel loader which is powered by SAA6D170E-5 6-cylinder engine, producing 502 net hp at 1,800 rpm. It offers straight static tipping load of 80,645 lb and 40 deg turn tipping load of 67,210 lb. With 3-element, single stage, double-phase torque converter and full-powershift, planetary type transmission, unit provides forward and reverse top-speed of 23.4 and 23.0 mph, respectively.

Komatsu America Corp.    Rolling Meadows, IL 60008
Mar 21, 2008 Designed for mining and large quarry applications, Model WA800-3 is equipped with dual speed hydraulic system, powershift planetary transmission, ergonomic cab, and Advanced Joystick Steering System. Water-cooled SAA12V140ZE-3 4-cycle engine delivers 808 hp and retains fuel-efficient operation, while viscous damping mounts insulate cab from shock and vibration. Edimos II electronic display and monitoring system continuously monitors all operating systems and provides alerts.

Komatsu America Corp.    Rolling Meadows, IL 60008
Mar 21, 2008 Models WB146-5 and WB146PS-5 backhoe loaders feature operating weight range of 16,090-18,740 lb. Available in open ROPS canopy or enclosed cab with dual entry, Model WB146-5 includes 88 hp turbocharged engine that drives HydrauMind hydraulic system, S shaped backhoe boom, parallel lift linkage for front loader, compact loader arms, and heavy-duty cast iron nose guard. Model WB146PS-5 incorporates full PowerShift transmission with twist grip gear control.

Komatsu America Corp.    Rolling Meadows, IL 60008
Mar 21, 2008 Designed for construction, utility, landscaping, and small- to mid-sized application, Model PC78MR-6 features operating weight of 18,230 lb and maximum dig depth of 15 ft 6 in. when equipped with long arm. With short tail swing design, hydraulic excavator includes fully adjustable suspension seat with retractable seatbelt and pilot proportional joystick controls. It offers 2 working modes, allowing operators to tailor machine operation to given application.

Komatsu America Corp.    Rolling Meadows, IL 60008
Mar 21, 2008 Powered by 84 hp Komatsu engine, Model SK1026 features 2,650, 5,300, and 5,400 lb of rated operating capacity, tipping load, and bucket breakout force, respectively. Equipped with Automatic Power Control (APC) and standard 2-speed transmission, 4 ton skid steer loader comes with high flow hydraulic system that helps increase available oil flow for attachments from 21-34 gpm and auxiliary hydraulic circuit with maximum flow of 21.0 gpm.

One RF Technology    Sophia Antipolis 06410  France
Mar 21, 2008 Available as pre-certified SMD component, TinyOne Lite 433 MHz measures 38 x 21 x 3 mm. Designed for industrial applications up to 500 m, RF module comes with M-One Stack firmware which is designed for constructing low-power long-range wireless Mesh networks such as sensor networks, irrigation, or home control.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Mar 21, 2008 Available in 2U and 4U versions, Model L4490A/91A provides tools to define and build custom switch matrix. Switch mounting system enables signal routing, while 3D models facilitate layout and documentation of RF/µw switches and cables. Platform features software drivers for all common programming environments and graphical web interface for setup, troubleshooting, and support. With built-in 10/100 Base-T Ethernet and GPIB interfaces, engineers can quickly connect to PC or network.

TURCK, Inc.    Plymouth, MN 55441
Mar 20, 2008 Twin-set sensor is comprised of 2 BIM-UNT sensing heads connected by overmolded cable; power and signal wires are then combined into integral M12 connector on sensor. BIM-UNT sensors measure 28 mm and active sensing faces are located at end of sensor to detect piston rod end position. Accessories range from precision mounting to wire-strain relief products allowing for installation of sensors in T-groove, dovetail, round, and tie rod pneumatic cylinders.

Conversion Devices Inc.    Huntington Beach, CA 92649
Mar 20, 2008 Featuring 85-264 Vac input with active PFC, SMM201 delivers full-rated output of 200 W with 15 LFM of forced air and has convection rating of 150 W. Size of 5.0 x 3.0 x 1.39 in. makes power density 13.33 W/in.³, and safety ground leakage current is less than 140 µA @ 132 Vac input. Single-output model has main output with available voltages from 12-60 Vdc up to 200 W, while dual-output model has second output with voltages from 3.3-12 V and current rating to 5 A.

Greyline Instruments, Inc.    Massena, NY 13662
Mar 20, 2008 Featuring built-in data logger with on-screen flow reports, OCF 4.0 uses non-contacting ultrasonic sensor to measure wastewater flow through flumes or weirs. Windows software is included to retrieve, display, and graph flow reports in customizable formats. Along with 3 control relays, flow rate display, and 10-digit totalizer, additional features include isolated 4-20 mA, 0-5 V, USB, and RS232 outputs; automatic temperature compensation; and ±0.25% accuracy.

Michigan Manufacturing Service, Inc.    Wixom, MI 48393
Mar 20, 2008 Suited for metalworking and metalforming operations, Jet Pack Automotive Lubrication System automatically sends low-pressure spray of high-viscosity lubricant to required areas. Control system timer regulates duration of spray for each machine cycle, while controlled air logic ensures clean, fogless application, and quick disconnect design speeds nozzle changeover. Virtually maintenance free, Air Assist helps optimize tool life and minimize lubricant usage.

HARTING, Inc. Of North America    Elgin, IL 60123 5538
Mar 20, 2008 Packaged in Han 10 B housing, Han® K 4/4 Connector combines 4 power contacts with 4 signal contacts and pre-leading PE contact. Current carrying capacity is up to 63 A per power contact, and power connections are made using axial screw terminals, which are suitable for 8-4 AWG wire. Featuring cage clamp terminations, 4 signal contacts are each rated up to 16 A. With finger safety of both female and male sides, Han K 4/4 can offer alternative to round CEE plugs.

pinta acoustic Inc.    Minneapolis, MN 55412
Mar 20, 2008 Fully encapsulated in FR taffeta vinyl, SONEX Clean Baffles, Panels, and Ceiling Tiles are 2 in. thick and made with ASTM E84 Class 1 fire-rated willtec® melamine foam core. Baffles and panels measure 24 x 48 in., while ceiling tiles are 24 x 24 in. Noise reduction coefficiency ranges from 0.75 for ceiling tiles to 0.80 for wall panels and averages 8.20 sabins for baffles. Offered in 17 colors, products are washable as well as fungus and microbe-resistant.

HARTING, Inc. Of North America    Elgin, IL 60123 5538
Mar 20, 2008 Fulfilling Cat 5e requirements, shielded Han RJ45 Ethernet Module comes in male and female parts, both protected by plastic collar. Female module is designed as gender-changer with two RJ45 jacks, while male module accepts standard or overmolded RJ45 patch cords.

Extech Instruments Corp.    Nashua, NH 03063
Mar 20, 2008 In addition to precision (2% RH) humidity meter, HD500 combines built-in IR thermometer for non-contact temperature measurement to 932°F, with 30:1 distance to target ratio, and built-in Type K thermometer that provides contact temperature measurements to 2,501°F. Double molded housing has backlit triple LCD to aid operation in low-visibility applications, while self-calibration utility allows for field calibrations using optional RH calibration bottles.

MEGA Electronics, Inc.    New Brunswick, NJ 08901
Mar 20, 2008 Pin-compatible 0.5 and 1.0 A M78 switching regulators are recommended for use as stable sources of dc output voltage from wide input dc range such as from batteries. They include thermal shutdown, short circuit protection with continuous automatic recovery, and low ripple and noise. Fully encapsulated regulators have normal operating temperatures from -40 to +85°C ambient and +100°C case temperatures.

Ingersoll-Rand Co.    Annandale, NJ 08801
Mar 20, 2008 Suited for industrial, assembly, and MRO applications, QA8 series pneumatic nutrunners can be used on hard or soft joints, including plastics, composites, or metals and include ergonomic grips. Devices operate via lubrication-free motors and utilize adjustable shut-off clutches and reverse rings. They are customizable to operator's application in both straight and angle configurations.