Big Beam Emergency Systems, Inc.    Crystal Lake, IL 60039
Mar 25, 2008 Including 320 and 400 W pulse start metal halide lamp, LBE series LED emergency light is suited for warehouses, industrial, and retail applications where typical mounting height is 15-25 ft. Independent of any outside power source, it provides instant illumination when regular power supply is interrupted, and has option of adding LED emergency backup light for 4-8 hr during power failure.

North American Industries, Inc.    Woburn, MA 01801 5205
Mar 25, 2008 Designed for bridge repair work and elevated highway renovations, gantry cranes can span over open lanes across whole bridge if necessary, and their legs can ride on edges of bridge to move forward as construction progresses. Available in spans to 150 ft and capacities to 150 tons, cranes come with trolleys and end trucks, and can be custom-engineered for outdoor conditions. Units adhere to CMAA, ANSI, UBC, AISC, and OSHA codes and safety requirements.

Dassault Systemes    Suresnes Cedex BP 310, 92156  France
Mar 25, 2008 With unified finite element analysis, Abaqus BioRID II (Biofidelic Rear Impact Dummy II) Crash Dummy Model helps evaluate occupant safety in rear-end collisions. It is used by automotive OEMs and suppliers to evaluate performance of complete seats (cushion and backrest), including head restraint systems designed to minimize whiplash injuries. Using Abaqus technology, model simulates accelerations and loads occurring in spine, neck, and head during rear-end collision.

Herkules Equipment Corp.    Walled Lake, MI 48390 1662
Mar 25, 2008 Providing solution for paint technicians to manually clean all waterborne paint equipment, Model G510 Waterborne Paint Gun Washer features water filter system that offers safe disposal method of all discarded paint. With aggressive bristles on its flow-through brush, unit removes any stubborn paint. Washer also features air dry gun and quick clean rinse.

Intercim, Inc.    Burnsville, MN 55337
Mar 25, 2008 Comprised of Process Planning, Process Rules Discovery, Process Execution, Operations Advisor, Emergent Process Management, and Performance Tracker, Pertinence Suite® powered by Velocity(TM) manages entire production process from design through final inspection. Its 'Powered by Velocity' core is transactional layer which facilitates data exchange between modules. Predictive analysis capability helps manufacturers understand and prevent quality defects before they happen.

Linksys    Irvine, CA 92614-5723
Mar 25, 2008 With wireless data transmission rate of 54 Mbps, Model WIP310 is suited for voice service providers and IP telephony value-added resellers. Wireless-G IP iPhone features 802.11b/g wireless LAN access, 64- and 128-bit WEP and WPA personal wireless encryption modes, WPS, 802.11e WiFi multimedia QoS, and U-APSD. It also comes with 1.8 in. backlit TFT LCD, polyphonic ring tone, speakerphone capability, and 2-tone LED that indicates phone charging status.

BOSaNOVA, Inc.    Phoenix, AZ 85027
Mar 25, 2008 Capable of managing large number of thin client units, BOSmanager Enterprise Edition can perform operations on groups and/or individually selected devices, providing solution for configuring and updating multiple devices. Users can create, modify, and restore thin client configurations, enabling thin client to be installed without configuring anything at desktop. Software features push/pull updating of firmware and terminal server content management using CrossRun server.

DeltaTRAK    Pleasanton, CA 94566
Mar 25, 2008 Providing delivery and facility management, ColdTRAK® PIMM(TM) integrated real-time cold chain management solution allows suppliers, consolidators, distributors, and final receivers to monitor, analyze, and share temperature data through entire process. Features include wireless system that supports up to 256 sensors, Operations Scoreboard rating system that can evaluate quality assurance goals and identify weak links, and Buddy list similar to online chat concept.

GAO Tek Inc.    Toronto M1B2K4  Canada
Mar 25, 2008 GAO IDE for ARM Development Tools Suite B enables managing/building projects, establishing/managing host-target communication, as well as running/debugging applications. With support for ARM build tools, it features GUI, project management facility, integrated source-code editor, GNU compilers, assembler and linker, GNU ANSI C library, source-level debugger, and ARM instruction set simulator. Integrated Development Environment runs under Windows 98, NT 4.0, and above.

Banner Engineering Corp.    Minneapolis, MN 55441
Mar 25, 2008 Offering close and long-range presence detection in broad range of weather conditions, R-GAGE(TM) QT50R uses Frequency Modulated Continuous Wave (FMCW) radar to detect moving or stationary cars, trains, trucks, and cargo. It detects target objects up to 15 m away and ignores anything beyond setpoint. With -40 to 65°C working temperature range, IP67-rated sensor operates at 24 GHz in ISM telecommunication band, and features bright indicator LEDs for status monitoring.

Linear Technology Corp.    Milpitas, CA 95035
Mar 25, 2008 Operating from input voltage of 4.5-10 V, Series LTC3602 synchronous buck regulators can deliver up to 2.5 A of continuous output current at output voltages as low as 0.6 V, and are suited for dual cell Li-Ion applications. Model LTC3602EUF is available in 4 x 4 mm QFN-20, while Model LTC3602EFE is offered in 16-lead, thermally enhanced TSSOP package. Units use internal switches with RDS(ON)s of only 65 and 90 mW to deliver efficiencies as high as 95%.

Linear Technology Corp.    Milpitas, CA 95035
Mar 25, 2008 Suited for handheld applications, Model LTC3670 includes 400 mA, 2.25 MHz synchronous buck regulator that delivers efficiencies of 93%, and two 150 mA LDOs that are adjustable down to 0.8 V. It has input voltage range of 2.5-5.5 V, and BurstMode® operation that minimizes quiescent current to 70 µA in no load conditions. Other features include Power-Good pin, internal soft-start and compensation, reference accuracy of ±2.5%, current mode operation, and transient response.

Schurter, Inc.    Santa Rosa, CA 95403
Mar 25, 2008 Series 5003 ECO includes screw mount version for front or rear mounting to chassis as well as snap-in version that features AMP Universal MATE-N-LOK and Molex HCS-125 connectors encased with single stage filter rated up to 15 A at 125 Vdc. EMI filter provides wideband attenuation in frequencies ranging from 100 kHz to 30 MHz. Offered in lightweight and environmentally friendly compact package, dc power entry module is ENEC and cURs approved and complies with IEC/EN 60950 standard.

Orion Fans/Knight Electronic    Dallas, TX 75238
Mar 24, 2008 Designed for electronic equipment and industrial enclosures, ac fan series OA109AP-11/22 measure 120 x 38 mm and can be configured to operate on 115 or 230 V. Fans are constructed from diecast aluminum and have UL94V-0 glass fiber reinforced thermoplastic impellers. Models are available in standard 3000rpm/110cfm airflow/15watts, 2300rpm/71cfm airflow/11watts, and 1600rpm/51cfm airflow/8watts. Also available are dual and sleeve bearing versions.

PartMaker, Inc.    Fort Washington, PA 19034
Mar 24, 2008 CAD/CAM software, PartMaker v8.6 includes updates to solids handling, machine simulation, and programming functions. Software provides ability to program angled grooves as well as inclined turning operations on B-axis lathes equipped with articulating tool heads. It allows programming methods in 5-axis planes and geometry handling for planar surfaces. Additional capabilities include simulation of "mini-turrets" tool holders that can hold turning tools in single station.

Thermo Fisher Scientific    Waltham, MA 02454
Mar 24, 2008 With footprint of less than 1 m², Thermo Scientific ARL OPTIM'X includes sample handling arm equipped with suction device or gripper to load samples for analysis and fixed circular magazine for storage of reference standards. Analysis and distribution of results is automated and compact WDXRF spectrometer features SMS-Omega audit trail function for traceability of production control. It is suited for metals, mining, minerals, and cement industries.

Digital View, Inc.    Morgan Hill, CA 95037
Mar 24, 2008 ActivPrint(TM) uses specific design techniques, along with programmable e-paper technology and animation, to turn static advertising into animated displays. Available in any shape and with up to 10 animation steps, displays operates up to one year on 2 AA batteries and can be used on shelves or integrated into any type of advertising solution. Flexible positioning options and animation help capture audience attention, build brand awareness, and raise sales.

Micropelt GmbH    Freiburg 79110  Germany
Mar 24, 2008 With micro-thermogenerator built into M24 steel screw, TE-Power-Bolt harvests energy from surfaces and structures from 10-20°C over ambient temperature or directly from hot liquids. Output power can range from 0.2-15 mW and is voltage stabilized by dc-dc converter, which can be set to fixed voltages from 1.2-5 V. Self-sustaining energy supply sticks out about 2.2 in. from host's surface. By exposing 1.5 in. dia aluminum heat sink to fresh air, TE-Power-Bolt acts as never-charge battery.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Mar 24, 2008 Designed for construction fleets, small contractors, and pipe welding applications, PRO 300 provides 20-410 A of welding power, as well as 12,000 W of peak generator power. Single circuit board is housed in sealed environment, protected from heavy industrial applications. Digital voltage control enables operators to pre-set and maintain voltage, while Lift-Arc function creates consistent and positive arc starts, and Auto-Stop function allows welder to break arc without flaring.

Selco Products Co.    Reno, NV 89521-5908
Mar 24, 2008 T60 Encapsulated Thermostat features all-plastic sealed housing that eliminates corrosion and prevents water damage. Automatic reset thermostat features factory calibrated fixed bi-metal disc mounted adjacent to monitored surface and provides rapid response to temperature changes. T60 adapts to 5/16 or 3/8 in., tubing with or without clip. SPST contacts are rated to 16 A at 250 Vac and may be factory calibrated at any temperature between -4° to 212°F.