Agilent Technologies, Inc.    Santa Clara, CA 95051
Sep 30, 2011 Running on Infiniium 90000 Series oscilloscopes, U7249A Software provides wide range of tests to meet physical-layer requirements of MIPI Alliance's M-PHY Specification v1.00 and M-PHY Conformance Test Suite v0.65. Program supports M-PHY speeds up to 5.8 Gbps, enabling R/D design teams to address start-up debug and validation needs. In addition to automated scope measurement setup and programming, software provides automated margin analysis and pass/fail conformance reporting.

Snap-on Industrial    Kenosha, WI 53143
Sep 30, 2011 Regardless of weather, location, or working conditions, All Weather Mobile Tool Chest provides secure, weather-tight storage for tools that must be readily moved. Telescoping, trolley-style handle and 22 in. wheel base facilitate mobility, while solid rubber wheels absorb shock of rough surfaces. Available configurations offer two 2 in. drawers plus six 1 in. drawers or three 2 in. drawers plus four 1 in. drawers. Able to be fully extended, sliding drawers accommodate foam cutouts.

Phoenix Contact    Harrisburg, PA 17111 0100
Sep 30, 2011 Available in 2 m lengths, halogen-free wire duct is designed for use in public areas that experience high foot traffic and demand increased safety from toxic smoke in case of fire. Features include easy-on/easy-off cover, single part number for both duct and cover, and 2 score lines for facilitated removal of fingers and wall. Rated from -25 to +90°C, product suits locations such as airports, subways, commuter rail cars/buses, office buildings, and offshore housing locations.

Reis Robotics    Elgin, IL 60123
Sep 30, 2011 Allowing robotic welding even for short production runs, completely enclosed and movable welding cell consists of 6-axis RV10-6 vertical articulated arm robot, high-capacity RobotStarV control, and 2 freely programmable additional axes. Welding robot, which may be arranged upright or suspended overhead, has payload capacity of 13.23 lb and repeatability of 0.002 in. All supply, exhaust, and safety requirements are integrated within cell, which occupies 32.8 feet² floor space.

Emerson Network Power    St. Louis, MO 63136
Sep 30, 2011 Housed in plug-in, rack-mount module with 1U x 2U form factor, 460 Watt Model DS460SDC-3 achieves typical conversion efficiency of 90% at 50% full load. Bulk front-end unit features 40-72 Vdc input that accommodates all standard 48 V battery back-up schemes, and has max inrush current of 50 A. Power supply generates main payload output of 12.3 Vdc, capable of delivering up to 36 A continuously, and also produces auxiliary always-on 12 Vdc output for powering housekeeping and standby circuitry.

Xilinx, Inc.    San Jose, CA 95124 3400
Sep 30, 2011 SMPTE 2022-5/-6 IP core accommodates needs of broadcast equipment developers delivering IP-based systems that transport raw, high-bit video from remote events to studios, post editing houses, and other points along production process. Offering Forward Error Correction (FEC) for video over IP, core lets developers build flexible, high-bandwidth systems capable of recovering IP packets lost to network transmission errors and ensure quality of uncompressed, full bandwidth professional video.

E-Switch Inc.    Brooklyn Park, MN 55428 1514
Sep 29, 2011 Constructed with industrial design and PVC cap for dust and water protection equivalent to IP54, KJD17 series suits safety-conscious industrial applications. UL-Listed pushbutton switch has 10,000 cycle life expectancy and internal electromagnet that provides automatic safety protection against power outages and restarts. Contact ratings include 16 A @ 12 Vac, 16 A @ 220/240 Vac, ½ hp 120 Vac, and 2 hp 220/240 Vac. Dielectric strength is 1,500 Vac for 1 min.

Goodfellow Corp.    Oakdale, PA 15071
Sep 29, 2011 Consisting of alkaline earth silicate material, Superwool® 607® HT(TM) offers safe-to-use alternative to traditional fiber-based insulation. Product's low biopersistence means that inhaled fibers are rapidly removed by natural processes within body. With classification temperature of 1,300°C, low shrinkage, and low thermal conductivity, insulation is suited for kiln linings, heat treatment furnace linings, heat containment, and boiler walls.

Elma Bustronic    Fremont, CA 94538
Sep 29, 2011 Designed to VITA 65 principles, backplane BKP3-CEN09-15.2.17-1 has centralized routing topology and data speeds to 3.125 Gbps per channel. Switch slot is connected to slots 1, 4, 5, 6, 7, and 8, and slots 1-3 are also connected on data plane. Contiguous groups of slots can have their maskable reset pin joined via jumpers within backplane header. Also, optional Ethernet expansion plane is available for out-of-band communication. Version with speeds to 6.25 Gbps is also available.

Tekni-Plex, Inc.    Somerville, NJ 08876
Sep 29, 2011 Suited for pharmaceutical and nutraceutical applications, ALU-LOOK(TM) blister films provide option to cold-form foil and aluminum strip packaging. Product can be used as mono film and primary application is for laminations to PCTFE films. In addition to moisture barrier properties, pharmaceutical grade PVC film runs on standard thermoforming equipment, protects against UV and visible light, and mimics visual characteristics of cold-form foil.

Ericsson Microelectronics Response Management Cent    Newcastle-u.-Lyme S ST5 8QX  United Kingdom
Sep 29, 2011 Featuring 36-75 V input range, PKU4619 and PKU4710 respectively offer 2.5 V/25 A and 3.3 V/20 A outputs and capability to deliver 62.5 and 66 W. Board-mounted products, supplied in 33 x 22.9 x 8.8 mm package, have 3.6+ million hr MTBF, 1,500 Vdc I/O isolation, and several integrated protection features. In natural convection environment, full power can be delivered up to +40°C (up to +80°C with 3.0 m/s airflow). Converters are suited for use when upgrading 50 W boards to 60 W.

E Instruments International LLC    Langhorne, PA 19047
Sep 29, 2011 Capable of measuring CO, CO2, temperature, humidity, air flow, air velocity, and current/voltage, Model AMI300 is suitable for all indoor air quality monitoring applications. Unit is available with differential pressure modules as well as variety of temperature, RH, and air flow probes. Housed in IP54-rated shockproof ABS, tester features blue LCD with Min/Max/Hold/Unit selection and data storage with software capabilities.

GOEPEL electronics LLC    Austin, TX 78759
Sep 29, 2011 SYSTEM CASCON(TM) v4.6 provides 45 integrated tools for in-system programming (ISP), test, debugging, and design validation. Also available, CASCON Mission Assist(TM) enables completely graphical project development based on predefined mission targets. It also automates context-sensitive adaptation of all system tools and process controls. While system controls guide users through project development flow, open and flexible design provides support for diverse access technologies.

Buckhorn, Inc.    Shelbyville, KY 40065
Sep 29, 2011 Measuring 48 x 45 in. with 25 or 34 in. height, Model BN4845 has structural foam panels and 31.7 in. wide drop down doors that are either 10.24 or 14.5 in. deep, based on height of box. Container includes ergonomic handles and 4 drain holes for outside storage. Featuring 100% recyclable design, box nests with competitive bins when upright or collapsed, and provides 4-way forklift entry. Multiple recessed areas and flat surfaces for labels facilitate RFID tracking.

SAW instruments GmbH    Bonn D-53177  Germany
Sep 29, 2011 Featuring 2 sensor chips to aid parallel processing of samples, sam®X uses Surface Acoustic Wave technology to detect mass binding and protein conformational changes on whole cells in real time. It does not require complex labeling methods and can be used to investigate living cells. Using fluidics, each channel can by utilized independently or via sequential combinations of 4 x 2, 2 x 4, or 1 x 8 channels. Different ligands can be immobilized online at each chip position automatically.

Eriez Magnetics    Erie, PA 16514
Sep 29, 2011 Used in vacuum and pressure pipelines, PN Metal Separators remove metal contaminants from pneumatically conveyed materials, plastic pellets, and regrind. Contaminants, even those encapsulated in pellets, are removed via reject mechanism that operates reliably at conveying speeds to ~4,000 fpm without interrupting flow. Modular design enables flexible adaptation to different conveying methods, and options are available to accommodate high temperature, abrasive, and powdery bulk materials.

Flexaust Co., Inc., The    Warsaw, IN 46581
Sep 29, 2011 Available in 2-6 in. I.D. sizes, Flexadux® PV R-4 Stretch is reinforced with spring steel wire helix that expands up to 7 times its original length. Medium-weight, clear PVC hose offers chemical and moisture resistance and is made from FDA acceptable materials. Suitable for variety of industrial vacuum and woodworking dust control applications, hose comes in 10, 25, and 50 ft lengths with plain cut end finish.

GL Communications Inc.    Gaithersburg, MD 20877
Sep 29, 2011 Offering multi-link emulation, IPNetSim(TM) IPN600 Series simulates impairments commonly found in IP Networks and can be used to test IP end point devices for voice, fax, data, or multimedia transmission over IP. Models IPN601 and IPN610 respectively offer 1 and 10 Gbps multi rate capability with four 1 or 10 Gbps SFP+ ports, supporting both 10 Gbps SFP+ and 1 Gbps SFP. With capacity of up to 4 or 40 Gbps, network emulators can simulate 2 separate full-duplex links up to 4 or 10 Gbps.

EPLAN Software und Service GmbH & Co. KG      Germany
Sep 29, 2011 Offering fully integrated solution, EPLAN Pro Panel 2.1 merges design, 3D layout, production, and mounting onto uniform database. Program supports dynamic collision control, automatic checking of respective installation conditions, and incorporation of devices used in electrical and fluid designs into mounting layout without manual synchronization. Modifications to housing, doors, or mounting plates can be transferred to appropriate production system via NC interface.

Vezzani, S.p.A.    Ovada   Italy
Sep 29, 2011 Designed for productivity and durability, VS Series pre-compression shear is offered as mobile system in 600-700 ton range that utilizes inclined-plane gravity feed system. Single operator can load feed box, which is inclined to 30° angle, and operate shear via remote control system from cab of any standard loader. Operator never has to stop loading to process batch, because material automatically advances into side compression chamber.