Northfield Precision Instrument Corp.    Island Park, NY 11558
Jul 07, 2008 Modified for spring clamp air open, Model 700 features hardened and ground 4140 top jaws that grip OD of drive shaft slip yokes. Chuck jaws have excess material milled away to reduce centrifugal forces, while hardened and ground alloy steel spline driver is mounted to chuck face to facilitate loading and driving of shaft as it spins to 3,500 rpm for balancing. TIR is equal to 1/10,000, cycle time is 60 sec, and accuracies range from 0.0001-0.00001 in.

American Casting & Manufacturing Corp.    Plainview, NY 11803
Jul 07, 2008 Used for tamper-evident and security applications, Model PSW-97 plunger seal locks come pre-numbered with 7 sequential digits and 12 in., 3-Ply galvanized wire (pre-inserted or loose). High security tamper evident self-locking plastic seal, designed for use with wire, is made with styrene or acetate plastic with stainless steel locking plunger and supplied with lettering and numbering. All colors available, including clear.

Master Bond, Inc.    Hackensack, NJ 07601
Jul 07, 2008 Formulated to cure at room temperature, 2-component Supreme 11AOHT can be applied without sagging or dripping. It has mixing ratio of 1:1, operating temperature of -100 to +400°F, thermal conductivity of 10 BTU/in/ft²/hr/°F, and dielectric strength of greater than 400 V/mil. Suited for applications involving thermal cycling, product adheres to most metals, ceramics, glass, rubbers, and plastics. Bonds are resistant to water, oil, and most organic solvents.

Kennametal, Inc.    Latrobe, PA 15650-0231
Jul 07, 2008 Engineered specifically for extended-length boring applications from 4:1 up to 6:1 diameter-to-length ratio, Heavy Metal-Boring Bars handle finishing and medium-machining ID turning, grooving, and threading tasks. They feature heavy metal construction with brazed steel heads and help reduce failure possibilities while in use. Bars are available in variety of sizes, including 8, 10, 12, 16, and 20 mm and 3/8, 1/2, 5/8, ¾, and 1 in.

Telequip Corporation    Salem, NH 03079
Jul 07, 2008 Able to dispense coins for approximately 200 transactions, T-Flex(TM) Coin Dispenser offers Even Depletion dispense option that provides optimal coin use for long runs, and Minimum Dispense feature that releases least amount of coins necessary. With compact design that integrates into any business environment, it helps accelerate speed of customer service. It is adaptable to variety of currencies including U.S. Dollar, Canadian Dollar, and Euro.

Tri-M Engineering    Port Coquitlam V3C 6L3  Canada
Jul 07, 2008 Measuring 3.55 x 3.775 x 0.9 in. and operating across -40 to +85ºC temperature range, Model VSX104+ rugged, fanless 300 MHz CPU module conforms to PC/104plus form factor, which allows users to add wide-range of I/O options. It features 128 MB soldered on DDR2 RAM, 4 COM ports, 2 USB 2.0 ports, and dual 10/100 Ethernet port. Along with 2 MB onboard SPI Flash, board includes both Type I CompactFlash(TM) socket as well as microSD socket.

Lam Research Corp.    Fremont, CA 94538
Jul 07, 2008 Addressing range of challenging etch applications, including high-k/metal gate, hardmask open, shallow trench isolation, and strained silicon, 2300® Versys® Kiyo3x Conductor Etch Series features wafer temperature control to enable radial tuning for edge control and profile shaping. It uses advanced pre-coat and post-etch chamber clean techniques. For complex film stacks such as high-k/metal gate, Kiyo3x provides multi-film etch capability in single chamber.

IEMCA    Charlotte, NC 28273
Jul 07, 2008 Targeting medical and other small precision parts manufacturing industries, Elite 112 is engineered with closed, calibrated, round section channels, enabling high performance, even with high-rotation spindle speeds. Able to synchronize with ultra-high headstock acceleration on Swiss-style machines, bar feeder features low inertia (-40%) mechanical synchronization system to ensure precision following of headstocks, including those actuated by linear motors, regardless of bar diameter.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Jul 07, 2008 Intended for OEM applications, Model 4007 4-channel IEPE signal conditioning board features 2 outputs labeled AC and DC for each channel. Each channel is equipped with variable low pass filter of 3 and 10 kHz, and channel 1 features logical output for fault detection. Requiring 20-36 Vdc, unit needs only one constant voltage supply for all 4 channels. With PCB-based physical configuration, it measures 5 x 4 in. with 4 standoffs each 0.5 in. high.

Gent-L-Kleen Products, Inc.    York, PA 17406-8409
Jul 07, 2008 Containing 5 skin conditioners, Foaming Gent-L-Kleen® Waterless Hand Cleaner is suited for removal of medium-to-heavy-duty soils, grease, oil, paints, and industrial carbons, without need for water rinse. Foaming Gent-L-Kleen® Hand Soap is biodegradable, VOC-, NPE-, and petroleum-free general washroom foaming soap that contains 9 skin conditioners. Both are available in 500 mL foaming dispenser bottle yielding more than 400 applications per container.

Grammatech, Inc.    Ithaca, NY 14850
Jul 07, 2008 Supporting desktop and server versions of Mac OS X, CodeSonar v3.1 Enterprise performs whole-program, interprocedural analysis on code, and identifies complex programming bugs that can result in system crashes and memory corruption. It is suited for companies working on mission-critical applications like satellites, avionics, industrial controls, and medical devices, as well as for organizations developing software for wireless devices, networking equipment, and consumer electronics.

Pickering Interfaces Inc    GRANTS PASS, OR 97526
Jul 07, 2008 Featuring software interfaces for each channel, Models 40-261 and 40-297 include calibration data that enables driver to select nearest value of resistance available. Model 40-261 is 2-channel unit with resistance ranges of 1.5 W to 2.9 kW or 10 W to 36 kW with setting resolutions of less than 2 and 15 mW respectively. Available in 3 configurations, Model 40-297 has resistance ranges of 1-230 W, 2 W to 13.5 KW, and 3 W to 1.5 MW with 18, 9, and 6 channels, respectively.

PulseTech Products Corporation    Southlake, TX 76092
Jul 07, 2008 Featuring 4 built-in wall-mount tabs and 2 fuse-protected quick-disconnect battery clamps and lugs, Xtreme Charge X2(TM) dual-station ruggedly designed maintenance charger works with all types and sizes of 12-volt lead-acid batteries. CUL approved unit automatically determines appropriate rate of charge based on battery's specific size and condition as well as optimal bulk or float charge rate. It can also determine if battery is faulty, cannot be re-charged, or is below 7 V.

Binder-USA, LP    Camarillo, CA 93012
Jul 07, 2008 Series 713 M12 Connectors are suited for automation applications and industrial networks. The 2.5-3.5 cable outlet has strain relief and IP67 environmental protection rating. Both straight and right-angled field attachable connectors are available. Metal locking system with screw termination provides IP67 protection when properly mated. An initial 4 contact version is offered.

Brookfield Engineering Laboratories, Inc.    Middleboro, MA 02346
Jul 07, 2008 DV-II+Pro viscometer provides continuous viscosity sensing, temperature measurement, and data display. It offers single point viscosity measurement or can be configured to run automated tests in standalone mode for comprehensive flow curve characterization without involvement of operator or computer. Providing bi-directional communication when used with any dedicated computer, unit can be controlled by computer when utilizing Rheocalc32 software.

Universal Air Filter Co.    Sauget, IL 62206
Jul 07, 2008 Allowing users to replace only air filter media, reusable clamshell or thin envelope air filter frame fits in spaces less than 0.25 in. thick and can be removed for service while continuing to reduce risk of disturbing dust loaded on filter. Frames are also open for access to replaceable media for cleaning and substitution. RoHS compliant unit meets UL 94 HF-1, ATCA, UL 900 Class 2, CE, Telcordia, NEBS GR-78-CORE and GR-63-CORE, micro TCA, and ETSI standards.

Brookfield Engineering Laboratories, Inc.    Middleboro, MA 02346
Jul 07, 2008 Including both Compression and Tension mode, CT3 Texture Analyzer offers load cells in 100, 1,000, 1,500, and 4,500 g as well as 10 kg limit. It features wide speed range for probe movement, USB port for direct connection to any PC, and optional temperature probe. With large vertical work area for large sample placement, stand-alone analyzer features 7 test modes such as normal, hold time, cycle count, bloom, TPA, tension, and static load calibrator check.

Peak Beam Systems, Inc    Edgemont, PA 19028
Jul 07, 2008 Maxa Beam Crew-Served Weapons Light (CSWL) Illumination System features field replaceable front lens and lamp assembly, as well as built-in interface that mounts unit to any M1913 Picatinny rail. With remote-controlled beam width feature, users can alter beam width between 1° spot and 40° flood, while non-lethal strobe function helps disable/disorient target in situations where lethal force is not warranted. Weighing 3.85 lb, unit offers 3,000 m visible/white light and 1,200 m IR illumination.

Digital Monitoring Products    Springfield, MO 65803
Jul 07, 2008 Available in 2 models, XT Series(TM) Burglary/Fire/Door Access Panel Includes network, cellular, and dialer communications, as well as 2-way wireless receiver on single board. Model XT30 supports 10 on-board and 20 additional zones and includes dialer, while XT50 comes with/without dialer, supports 10 on-board zones, and has 20 wired and 40 wireless zones for up to 50 total zones. Users can receive email or text messages each time any system event occurs, such as arming/disarming.

Binks ITW Industrial Finishing    Glendale Heights, IL 60139
Jul 07, 2008 Designed for high-flow circulation systems requiring moderate pressure, Exel(TM) pump works with water-borne and solvent-borne fluids, catalyzed coatings, high solids coatings, abrasive materials, and moisture-sensitive materials. Available in three 4:5.1 all-stainless-steel models, it delivers up to 6.85 gpm at 60 cycles/min. Pump features maximum inlet and working pressure of 100 and 450 psi, respectively, and SS wetted fluid chambers with self-priming pistons.