Rubyquartz, LLC.,    Aventura, FL 33160
Oct 05, 2012 Offered in 5 x 7, 5 x 3.2, and 3.2 x 2.5 mm ceramic packages, Rubyquartz XCO and XVO are available with LVCMOS, LVPECL, and LVDS outputs and offer RMS phase jitter of 0.6 ps typ from 12 KHz to 20 MHz. Power supply voltages are available at 3.3 and 2.5 V, and version is available with frequency stability of ±20 ppm. While XCO offers ability to select between 1–4 factory-programmed output frequencies on same output pin, XVO allows up to 2 configurable output frequencies on one output pin.

Creaform    Levis, QC G6V4L2
Oct 05, 2012 Featuring point-and-shoot design, Go!SCAN 3D White Light Scanner requires no complicated setup, and provides accuracy up to 0.1 mm, regardless of work conditions or environment. Dynamic referencing means that it is possible to move part during scanning. Software provides visual guidance throughout process, ensuring quality results. Weighing 1.1 kg, handheld scanner fits into carry-on case for portability.

OmniPulse Technology    San Diego, CA 92121
Oct 05, 2012 Measuring less than 1.7 in.³ and weighing 20 g, Model PCD-3-20 will operate from -40 to 70°C, as specified by U.S. military. Unit has rise time of less than 20 ns into 30 pF, with 25 ns propagation delay. Operating from 12 V input, 3 kV device draws about 30 mA of current. Onboard potentiometer allows user to trim output voltage, while specially designed output stage eliminates need for external damping resistors.

WheeLift Systems, a Doerfer Companies Technology    Waverly, IA 50677
Oct 05, 2012 Using fluid suspension technology, self-loading OmniLoader engages cask at bottom in order to lift and then carry. This promotes efficient movement within and between independent spent fuel storage installations (ISFSI), without needing to comply with single failure proofing. Operating on independent fluid suspension axles with air-filled jumbo jet tires, remotely operated loader also features SynchroSteer for all-direction travel over challenging and diverse surfaces.

Kin-Tek Laboratories    LaMarque, TX 77568 4202
Oct 04, 2012 Available for concentrations from low ppb to 10 ppm in 1 L/min dilution flow, Trace Source™ Permeation Tubes use mixture of reagent grade nitric and sulfuric acids as analyte source. Sulfuric acid binds water, minimizing water emission to negligible levels. Since emission of sulfuric acid is extremely low, emission is primarily nitric acid. Formation of nitrogen oxides in vapor is minimized by dynamically blending emission to form trace concentration mixtures that are then used immediately.

Calex Electronics Limited    Bedfordshire   United Kingdom
Oct 04, 2012 Measuring 18 x 45 mm, PyroMini sensing head is manufactured from 316 SS and sealed to IP65, making it suitable for food and pharmaceutical applications. High ambient version withstands temperatures up to 180°C without water or air-cooling. Via backlit touchscreen interface, temperature range can be set from -20 to 1,000°C. Measured temperature is displayed in digital format as well as graph view that shows history. When fitted with MicroSD card, PyroMini also functions as data logger.

GlacialTech Inc    New Taipei 235, R.O.C.  Taiwan
Oct 04, 2012 Optimizing cooling effect to components surrounding CPU to help extend working hours, Igloo i670CU Combo CPU coolers are constructed of aluminium alloy, feature high-fin density with Y shape, and come in constant fan speed and PWM versions. Latter increases fan speed with overloading of CPU and operates at 800 rpm ±300 rpm to 3,600 rpm ±10%. Constant speed versions are specified at 2,000, 2,600, and 3,200 rpm, all ±10%. Depending on model, 12 Vdc units operate at 20, 25, 32, or 15–38 dBA.

Acromag, Inc.    Wixom, MI 48393 7037
Oct 04, 2012 At 12.5 mm wide, signal conditioners comprising TT230 series, suitable for high-density mounting on DIN rails, includes models to isolate and convert thermocouple, RTD, voltage, or current input signals to 4–20 mA output. Each model accommodates various signal types, and USB connection to PC aids configuration using Windows® software. These loop-powered instruments support both source or sink output wiring connections on current loop with 12–32 Vdc supply.

CGW-Camel Grinding Wheels    Niles,, IL 60714
Oct 04, 2012 Made from nonwoven material impregnated with abrasive grains, Surface Preparation Wheels and Discs are designed for blending, smoothing, and finishing applications. Aluminum oxide products have fine grit size for cleaning, blending, and finishing stainless steel, while silicon carbide products have very fine grit for light finishes on metal, wood, composites, and satin-finish aluminum. Type 27 wheels come in 4, 4 ½, and 7 in. diameters, while discs come in 2 and 3 in. diameters.

WAGO Corp.    Germantown, WI 53022
Oct 04, 2012 Comprised of solid pins that insert directly into 2060 Series Terminal Blocks on adjoining PCBs, 2060 Series Board-to-Board Connection Link simplifies in-line assembly of several LED modules into one string. No manual wiring is required, minimizing labor and materials needed for connecting LED modules. Available in configurations with 1–6 poles and 4 mm pin spacing, product also supports LED retrofits and carries 9 A nominal current rating.

Eclipse, Inc.    Rockford, IL 61103 1299
Oct 04, 2012 Designed for use with direct or indirect-fired furnaces or ovens that require global flame safety systems, T600 Flame Safeguard comes in Type 1 model with no display and Type 2 version with integrated display. Unit features advanced microprocessor to precisely control gas burner start-up and operation. Program sequences and operating times can be customized to provide exacting control in virtually any application.

TandD US, LLC    Saratoga Springs, NY 12866
Oct 04, 2012 Able to store up to 8,000 data sets, 3-channel TR-76Ui-H simultaneously measures and records CO2 concentration, temperature from -30° to +80°C, and humidity from 0%–99%. Automatic atmospheric pressure adjustment for measurement location ensures stable CO2 measurements up to 9,999 ppm. Included software lets user download recorded data to PC via USB connection, and data from all channels can be simultaneously viewed in graph or table form.

Agie Charmilles, LLC    Lincolnshire, IL 60069
Oct 04, 2012 Featuring 41.34 x 22.05 in. work table with 1,760 lb max payload, MIKRON HEM 800 is suited for production of medium- to large-sized parts. Respective max X and Y travels are 33.46 and 20.87 in., and Z-axis provides 23.62 in. clearance between table surface and spindle nose. Rapid traverse rate is 1,181 ipm. Features include 12.75 hp, 14,000 rpm, CAT 40 spindle that generates 31 lb-ft; side-mounted automatic tool changer with 30-tool capacity; and Heidenhain TNC 620 digital control system.

KIC Thermal    San Diego, CA 92127
Oct 04, 2012 Designed to fit virtually any reflow oven, ProBot automatically verifies whether each PCB is processed to specification. Suspect PCBs then can be sent off to batch X-ray. Since neither X-ray nor AOI inspection can see molecular structure of solder joint, more complete quality inspection can be achieved when combined with ProBot, which can verify that solder joints have been processed within tolerances of both component and solder paste specs.

AAEON Technology Inc    Taipei   Taiwan
Oct 04, 2012 Powered by 3rd Generation Intel® Core™ i7/ i5/ Celeron® processor, Model AEC-6977 comes equipped with HD4000 graphics and 2 DDR3 1,066/1,333/1,600 MHz SODIMM slots to support up to 8 GB of memory. Unit provides 2 DisplayPort interfaces, 1 VGA, 1 DVI-D, 2 Gigabit Ethernet ports, 1 RS-232 port, and 1 RS-232/422/485 port. Two 6 Gbps SATA connectors can support RAID 0, 1, 5, 10, and CFast™ slot for external storage. For added functions, board offers one PCIe x4 or 2 PCI expansion slots.

Walter USA, Inc.    Waukesha, WI 53188
Oct 04, 2012 Xtra•tec® Insert Drills are available with Tiger•tec® Silver aluminum oxide coating, which promotes tool life and process reliability in demanding drilling applications. Combining high temperature wear resistance and toughness, coating is available with several insert materials. Cutting materials WKP25S and WKP35S suit all cast iron and steel materials. When machining ISO-P, ISO-M, or ISO-S materials, PVD-coated center indexable insert made of cutting tool material WXP40 is available.

ON Semiconductor, LLC    Phoenix, AZ 85008
Oct 04, 2012 Optimized for battery powered systems such as smartphones and digital cameras, Model NCP6924 integrates two 800 mA, 3 MHz step down DC-DC converters and 4 LDO regulators for total quiescent current of 105 µA, while Model NCP6914 integrates single 800 mA, 3 MHz step down DC- DC converter and 4 LDO regulators to deliver quiescent current of 72 µA. Featuring 5 and 6 voltage rails, both are sized to supply power to mixed signal modules, or to complement power distribution to application processor.

powerblanket    Salt Lake City Utah, UT 84104
Oct 04, 2012 Accommodating equipment and machinery protection needs, Extra-Hot (EH) blankets leverage GreenHeat™ Technology to create barrier of insulated heat for accelerated thawing, temperature control, and freeze prevention. Standard models range from 2 x 2 ft to 6 x 12 ft or 3 x 25 ft and are rated to -10°F; Roughneck Gray versions perform in temperatures as low as -40°F. Powered by 120 V, portable blankets have winter-proof, water-resistant outer shell.

Future Technology Devices International Limited    Glasgow G41 1HH  United Kingdom
Oct 04, 2012 Operating at 12 Mbps and designed to USB 2.0 specification, FT12 series supports direct memory access (DMA) operation while providing system interfaces for 8-bit parallel bus and SPI Slave. ICs are configurable as standard device class, negating any need to add USB drivers. Composed of 3 members and inspired by industry standard D12, series offers features such as battery charging detection, various interface options, and optimized footprints to accommodate needs of designers.

Sauer-Danfoss Inc.    Easley, SC 29642
Oct 04, 2012 Rated for flow of up to 17.2 gpm and work port pressure up to 5,800 psi, PVG 16 has modular design and targets such applications as municipal vehicles, agricultural equipment, small cranes, and construction machinery. Valve facilitates integration of load-sensing system design and electrohydraulic actuator technology. Featuring MCU for closed loop control as well as spool control and built-in fault monitoring, PVE Series 6 actuator provides valve with its electrohydraulic platform.