McPherson, Inc.    Chelmsford, MA 01824
Oct 12, 2011 With 250 W output, Model 718 powers tungsten-halogen, ceramic, and glow-bar infrared light sources. Unit's performance of less than 0.05% ripple to source in use is based on high-stability transistor series pass regulators with additional control circuitry. Operated from front panel controls or remotely via 0-6 V analog input, Model 718 is suited for spectroscopy, photometry, and other metrological applications.

UVolve® Instant Floor Coatings    Elgin, IL 60120
Oct 12, 2011 Registered for incidental food contact, UVolve® Instant Floor Coatings provide sustainable solution for food and beverage facilities. Immediate UV cure accelerates return to service after application, minimizing impact on business operations. Once installed, low-odor and nero-zero VOC emissions solution produces floors with anti-slip finish as well as chemical and stain resistance. Dirt and debris will not penetrate protective surface, facilitating sanitization.

Crestron Electronics, Inc.    Rockleigh, NJ 07647
Oct 12, 2011 Used in commercial environments where multiple speakers need to be run from one amplifier, convection-cooled AMP Series helps meet energy savings objectives without sacrificing audio performance. Each channel is selectable for 210 W @ 4 ohms or 120 W @ 8 ohms and isolated 120 W at 70 or 100 V. Delivering low-noise, low-distortion performance, amplifiers have automatic shut-off and turn-on functionality and suit background music, AV presentation, paging, and public address applications.

B&W Tek, Inc.    Newark, DE 19713
Oct 12, 2011 Suited for cGMP compliant facilities, NanoRam(TM) Raman Spectrometer and integrated computing system is equipped with CleanLaze® technology for laser stabilization and narrow linewidth. Unit provides spectral resolution below 10 cm^-1, Raman shift coverage up to 3,200 cm^-1, and TE-cooled 2,048 pixel CCD array. Intended for pharmaceutical customers, NanoRam analyzes active pharmaceutical ingredients, excipients, and drug products as part of Lean manufacturing and quality process.

Taiyo Yuden (USA), Inc.    Schaumburg, IL 60173
Oct 12, 2011 Measuring 26 x 20 mm with max height of 0.9 mm, Model PAS2126FR2R5504 is suited for pulse current discharge of LED flash, which enables clear photographic images at low light conditions. Device features 0.5 F capacitance, 80 mW max impedance, and rated voltage of 2.5 V. In addition to mobile phones, smartphones, digital still cameras, and digital camcorders, capacitor is suited for portable printers and scanners as well as SSD's UPS applications.

Larson Electronics, LLC    Kemp, TX 75143
Oct 12, 2011 Suited for remote or unmanned hazardous locations, Model EXPLED-SOL12 illuminates area approximately 50 x 50 ft. Unit has copper-free aluminum alloy housing with baked powder epoxy finish, and is marine-rated for saltwater environments. Powered by 14.8 V LiPoly battery that is recharged by 12 W solar panel, light includes motion sensor and day/night sensor for optimal battery use. Model EXPLED-SOL12 can run 15 hr with 5 hr charge and is available in wall, pendant, or ceiling mounted versions.

Larson Electronics, LLC    Kemp, TX 75143
Oct 12, 2011 Incorporating two 50 lb grip magnets beneath 2 suction cups, Magnalight 9200-LED-S-M can be affixed to smooth surfaces as well as ferrous metallic surfaces. Unit is equipped with 32 LEDs that provide total of 32 W of signal power, generating 10 joules per flash signal. Drawing 2.7 A on 12 V system, water-resistant beacon includes amber protective lens and 16 ft cord with inline switch and cigarette plug adapter for connection to equipment, vehicle, or boat.

NephSystem Technologies    Delta V4L 2A6  Canada
Oct 12, 2011 Operating from 2.400-2.4835 GHz, IP67-rated NSAR-800 has built-in omnidirectional antenna that allows identification of NSAT active RFID tags over distances up to 600 ft. Reading range can also be adjusted by software; distances up to 4,900 ft (outdoors) are possible with NSAT-704 heavy-duty active tags. In addition to Ethernet and RS232 interfaces, features include 200 max simultaneous tag detection as well as built-in and software controllable digital dry-contact relay channels.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Oct 12, 2011 Along with backlit display and 1 m sensor cable, battery-operated MiniTest 650 features one-pole sensor made of wear-resistant carbide material. Ram- and impact-protection is provided through rubber rimmed casing, and USB interface enables connection to PC. Unit comes in 3 models: with magnetic-induction sensor for measurements on steel substrates; with eddy currents sensor for measurements on non-ferrous metals; and with dual sensor for measuring on both steel or non-ferrous metals.

Ricoh Corp.    West Caldwell, NJ 07006
Oct 12, 2011 Comprised of 5 models, PJ Series offers minimum brightness rating of 2,500 lm, XGA or WXGA resolution, and 3LCD color clarity that delivers sharp images in any kind of light. Each model weighs less than 4.4 lb, has built-in speaker, and comes in carrying case. For permanent installation, projectors can mount in ceilings and walls. Models PJ WX3231N/X3241N can be integrated with local wired and wireless networks and feature USB connectivity.

ULVAC    Kanagawa 253-8543  Japan
Oct 12, 2011 Model MSC90000 addresses technical requirements of steel plate industry related to coil center lines, including slitter and shear lines. Line sensor cameras repeatedly shoot different rows in accordance with movement of line using pulse generator signals to create images. In addition to automatic illuminance tuning, system offers automatic mask setting function, which determines area to be targeted for inspection based on processed images of inspection objects.

Henry, Jack, & Associates, Inc.    Monett, MO 65708
Oct 12, 2011 Designed for banks automated by SilverLake System® and CIF 20/20® core systems and using NetTeller Online Banking(TM) platform, Gladiator NetTeller Enterprise Security Monitoring(TM) solution proactively defends retail and commercial customers from online fraud. Program tracks cash management and online banking activities to help combat ACH/wire fraud and comply with FFIEC Authentication Guidance Supplement. Behavioral analytics help determine if online account behavior is expected and legitimate.

Ramtron International Corp.    Colorado Springs, CO 80921
Oct 12, 2011 Operating at 5 V over -40 to +85°C range, nonvolatile FRAM - 4 Kb FM25040C, 16 Kb FM25C160C, and 64 Kb FM25640C - feature 1 trillion read/write cycles and perform write operations at bus speeds up to 20 MHz. Devices allow next bus cycle to commence immediately; data is written to memory array immediately after being received by device. Supplied in 8-pin, RoHS-compliant SOIC packag, products also feature write protection scheme that prevents inadvertent data writes to memory.

ONYX Graphics    Salt Lake City, UT 84047
Oct 12, 2011 Designed to help those who prepare files for wide format printing, SmartApps(TM) Sign&Banner plug-in v1.1 includes bleed setup tool for double-sided banners. Designers can use Double-sided Bleed feature to specify amount of print bleed and plug-in automatically matches correct bleeds for reverse side of banners. Tool can also account for banner poles or framing and uses presets for automating process for different banner types.

Touchstone Semiconductor    Milpitas, CA 95035
Oct 12, 2011 Supplied in 5-pin SOT23 packaging, TSM9938F and TSM9634F are pin-compatible and functionally identical to Maxim Integrated Products' analog ICs. Both current-sense amplifiers operate from +1.6 to +28 V, consume no more than 1 µA supply current and offer 50 V/V fixed gain option. They are designed for battery monitoring/management, power management applications, over-current and fault detection, lamp monitoring, motor control as well as for mobile and hand-held personal communication devices.

Yokowo America Corp.    San Diego, CA 92131
Oct 12, 2011 Allowing horizontal and vertical blade insertion, Two Piece Battery Connector is suited for devices where uninterrupted power is critical. Two tabs on receptacle provide secure grip around blade upon insertion. Biaxial torsion and floating function absorb battery gap and minimize risk of intermittent power outages. With current rating of 3 A per blade, connector features 30 mW max contact resistance, operating temperature of -40 to +85°C, and 12 Vac/Vdc voltage rating.

Despatch Industries    Lakeville, MN 55044
Oct 12, 2011 Focal Point(TM) fully controls curing process and documents all process information, providing traceability and validation of part quality on all Despatch composite curing ovens. System offers precise process control with lead-lag temperature control and recipe editor for programming temperature and vacuum profiles. During curing cycle, run status and all process values can be monitored from display panel. Also, remote modules can be added and communicate with oven PLC via Ethernet.

NephSystem Technologies    Delta V4L 2A6  Canada
Oct 12, 2011 Operating from 2.400-2.4835 GHz, NSAT Series continuously transmit unique, 8-character long ID numbers that can be detected and decoded by NSAR-800 active reader at distances up to 4,900 ft (outdoors). Products, which come in IP50/67-rated industrial PVC housings, use GFSK modulation and feature 1 Mbps communication rate and 99.99% identification accuracy. Battery life is rated up to 6 years, and anti-collision feature allows simultaneous reading of up to 200 tags.

AXIOMTEK Co., Ltd.    Taipei   Taiwan
Oct 11, 2011 Equipped with 15 in. XGA (1024 x 768) color TFT LCD, GOT-5152T-830 fanless HMI computer is powered by 1.6 GHz 45 nm Intel® Atom(TM) N270 CPU and mobile Intel 945GSE express chipset. Internal WLAN antenna allows real-time wireless LAN/GPRS/GSM/3G communication. In addition to one 10/100/1000Mbps Ethernet, connectivity options include PCIe Mini Card slot, 4 COM, 4 USB 2.0, Audio (line-out), and VGA. CompactFlash(TM) and 2.5 in. SATA HDD are provided for storage, and RFID function is optional.

PREMO Group    Barcelona   Spain
Oct 11, 2011 With double supply voltage of ±12 to ±18 Vdc, SY Series measures DC, AC, and pulse currents on PCBs. Units feature isolation voltage of 3 kV and are designed for nominal currents of 5, 10, 15, 20, 25, and 50 A. Output signal is centered at 0 V with output voltage of ±4 V, allowing detection of currents up to 3 times nominal value. In addition, sensors provide linearity less than 0.1% with ±0.7% accuracy levels, and bandwidth up to 150 kHz with response time below 1 µsec.