THK America, Inc.    Schaumburg, IL 60173 5340
Jul 17, 2008 Available in heights from 6-6.5 mm, block widths from 12-17 mm, and block lengths from 14.2-19.4 mm, Model SRS5M/WM employs synthetic resin cage with curvature that cradles each ball and separates it from next one. Spaces between rolling elements retain grease and act as lubrication system. With low particle generation, guide is suitable for precision equipment applications, including medical, semiconductor equipment, and measuring instruments.

Tiffen Co. LLC, The    Hauppauge, NY 11788
Jul 17, 2008 Made of water-resistant, heavyweight cotton canvas with foam padding on all 4 sides, F-300 Long Lens Bag enables camera to be stored vertically. Bag features 45° angle zippered main compartment and expandable front pocket with fitted weather flap as well as rear pocket for accessories. Adjustable 2 in. Gripper Shoulder Strap consists of twin tracks of high-friction rubber that are woven into cotton webbing so that it clings to shoulder and runs completely around bag for extra support.

Ogura Industrial Corp.    Somerset, NJ 08873
Jul 17, 2008 RoHS-compliant V series, developed to satisfy medical and other consumer-related applications in which clutch or brake engagement noise would be objectionable, is available with silent armature option. Unit incorporates noise dampening plastic disc to help dampen high-frequency noise and reduce time of noise wave.

Viking Pump Inc., A Unit Of IDEX Corp.    Cedar Falls, IA 50613 0008
Jul 17, 2008 Dimensionally interchangeable with Viking Heavy Duty Bracketed packed and sealed pumps, Universal Mag Drive Series facilitates upgrade process. Sealless offering features thrust-controlled design, allowing short-term run-dry capabilities and bi-directional pump operation for application flexibility. Offered in cast iron, steel, and stainless steel, products are suited for use with hazardous, hard-to-seal liquids and offer flow rates to 200 gpm with pressures to 200 psi.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Jul 17, 2008 Single-channel Series SLD monitors shaft seal of submersible pump to detect leak before pump failure. Leak is detected by sensing status of float or conductivity switch installed in seal cavity. When resistance drops below set sensitivity, output relay energizes and LED indicator illuminates. Utilizing 120 Vac control voltage, relays offer sensitivities of 470 W fixed, 470 to 10 kW adjustable, and 4.7 k to 100 kW adjustable.

Toshiba America Information Systems, Inc    Irvine, CA 92618-1697
Jul 17, 2008 Housed in compact white dome measuring 5.5 in. dia, Model IK-WD01A mini-dome IP camera can be used in retail stores, shopping malls, restaurants, educational facilities, and offices. It features built-in web server, dual codec Motion-JPEG and MPEG4 (SP) compression, PoE, detailed VGA (640 x 480) resolution, and streaming video rate of 30 fps. Camera also includes ¼ in. CMOS image sensor and wide-angle Varifocal fixed lens (F=1.4-1.8, f=2.0-4.0 mm) with 4x digital zoom.

Elma Electronic Inc.    Fremont, CA 94538
Jul 17, 2008 Available in various sizes and configurations including 19 in. rack mount enclosures in 3, 5, 7, and 10U heights and 22 and 25 in., 12R1 modular COTS system platforms have complete EMC shielding integrity with braided gasketing, honeycomb filtering, and blind-riveting. Rugged chassis shell is made of aluminum frames and extruded profiles, and hinged front door panel ensures unobstructed access to boards and drives. Units can withstand up to 15 G of shock and vibration.

B & R Industrial Automation Corp.    Roswell, GA 30076
Jul 17, 2008 Available in 2 sizes with self-cooled or externally-cooled options, 8LT series 3-phase synchronous motors can handle demanding applications. They feature compact design that eliminates need for angular gears in many cases, and can be integrated in wide range of applications. Equipped with embedded parameter chip for identification of all device data, motors have supply voltage of 400-480 Vac, rated power of 0.11-21 kW, and stall torque of 50-900 nm.

B & K Precision Corp.    Yorba Linda, CA 92887
Jul 17, 2008 Measuring 12.2 x 10.6 x 5.8 in., Model 2534 weighs 8 lb, and comes with analog-style knobs/controls and PC software that can be used to capture, save, and analyze waveforms and measurement results. It has triggering, digital filtering, waveform recorder, delayed sweep/zoom, mask testing, automatic measurements, and FFT functions to debug circuits. Features include 400 MS/sec sample rate, 4,000 point record length for each channel, and one-touch automatic setup (auto).

Contemporary Controls Ltd    Coventry West Midla CV4 7EZ  United Kingdom
Jul 17, 2008 BASR-8M BAS Remote Expansion Modules can be daisy-chained together to BAS Remote Master (BASR-8M) to meet specific I/O requirements, and BASR-8M can be expanded to total of 32 Universal I/O points and 8 relay contacts to suit any building automation installation. Configurable Universal I/O can support BACnet®/IP or Modbus/TCP points, and digital inputs can accept pulse trains in range of 0-40 Hz at 50% duty cycle to measure flow rates.

Phaseda LLC    Beaverton, OR 97005
Jul 17, 2008 Series KND2 snaps into industry standard panel cut-out size 0.862 x 1.169 in. and is equipped with 0.250 in. tab terminals for push-on assembly. Internal design allows protection against dust and water up to IP55 without external PVC cap. Functions include DPST On.Off, momentary (On).Off; DPDT On.On, On.Off.On, (On) ON, and two sides momentary. Switch has ac/dc rating and is UL approved at 20 A 125 Vac and 20 A 36 Vdc.

Brewer Science, Inc.    Rolla, MO 65401
Jul 17, 2008 Exhibiting bonded pair rigidity and thermal stability, Brewer Science WaferBOND(TM) HT-10.10 bonds fragile device wafers to rigid carriers to allow thinning and subsequent processing to create through-silicon vias (TSVs). This spin-on polymeric temporary wafer bonding material is resistant to solvents, acids, and bases. Device structure planarization with total thickness variation of less than 0.5 µm on 10 µm coating permits thinning to 50 µm and beyond.

Duraline Div., J.B. Nottingham & Co., Inc.    Islandia, NY 11749
Jul 17, 2008 Protected against ingress of dust, water, and other contaminants, SOFTPower series is comprised of environmentally sealed connectors able to withstand harsh environments. Factory prewired molded-to-cable connectors provide portable and modular power for industrial machinery. Offering NFPA-compliant components that help reduce maintenance activities and downtime, products meet crush and impact resistance requirements of type (MC) metal clad cable.

Packnet Ltd.    Eagan, MN 55121
Jul 17, 2008 Precision cutting service utilizes WaterjetPRO(TM) CNC cutting system, which projects pressurized 0.004-0.050 in dia stream to cut detailed geometries in any design. Solution can produce tight, inside 90° angles and minimize material loss, allowing parts to be nested together tightly while also maximizing number of parts yielded from raw material. Service creates edges with little or no burr, no heat-affected zones, and no distortion/warping of materials.

ifm efector, Inc.    Exton, PA 19341
Jul 17, 2008 Metal Face sensors feature weld field-immune electronics, weld slag-resistant coating, and stainless steel construction that withstands damage from impacts caused by part-loading in manufacturing cells. For power connection, there are 2 families of M12 Micro DC cordsets that feature cable material rated for elevated temperatures and coupling nuts with weld slag-resistant coating. Available cable lengths are 2, 5 and 10 m.

Fluid Metering, Inc. (FMI)    Syosset, NY 11791
Jul 17, 2008 Featuring range from 500 nL/dispense to 2 Lpm continuous flow, Sensata® uses precision stepper motors to control variety of FMI's valveless piston pumps. Programmable dispensing system accommodates all FMI pump sizes in fixed and adjustable displacement configurations. Pump heads are integrally mounted to control unit which is housed in anodized aluminum enclosure that has LED readout for display menu driven programming and membrane switches for navigating through programming steps.

Ametek Chatillon, Test & Calibration Instruments Div.    Largo, FL 33773
Jul 17, 2008 Designed for TAPlus texture analyzer, Kramer Type Shear Cell can measure bulk shear and extrusion forces of meat, fruit, and cereals where samples have irregular shapes and sizes or forces are too high. It has 5 parallel steel blades, which are driven down through guide slots into rectangular container with corresponding slots in base. Operating from ambient temperature up to 100°C with maximum capacity of 225 lbf and minimum load cell of 22.5 lbf, unit is fitted with spill container.

Panduit Corp.    Tinley Park, IL 60477 3091
Jul 17, 2008 With blue and red color options, J-PRO(TM) Cable Support System lets users segregate and identify cable bundles for specific applications such as data, security, fire alarm, or other applications that require designated pathway. It also prevents cables from coming in contact with metal and provides complete bend radius control to help ensure cable performance.

Pacific Bearing Co.    Rockford, IL 61125
Jul 17, 2008 With one exterior design and multiple configurations for interior design, MT series linear actuator can be utilized in range of horizontal/vertical and other applications that require greater distance between tasks in industries such as food and beverage, packaging, automotive, and medical equipment. Magnetically sealed to keep contaminants out, it can operate in dirty environments as well as in clean-room, laboratory, and other medical surroundings.

Pacific Bearing Co.    Rockford, IL 61125
Jul 17, 2008 Available in both vertical and horizontal belt driven configurations and wide variety of sizes, MX Series linear actuator has long stroke length in order to accommodate tasks that require movement over further distance. Heavy-duty system features large CAM rollers which are positioned on exterior of running surface.