Reynard Corp.    San Clemente, CA 92673
Jul 14, 2008 With ability to achieve reflectivity of greater than 99.9%, Galvo mirror coatings can withstand rigid durability requirements per military specifications including Temperature/Humidity and Salt Fog requirements per Mil-C-48497A. They function in application environments that range from ambient and controlled to harsh military conditions.

Test & Measurement Systems Inc.    Loveland, CO 80537
Jul 14, 2008 TAMS L488 is compact miniature adapter that connects directly to any test instrument's GPIB port and allows it to be controlled over LAN using single Ethernet cable, eliminating need for GPIB cables or LAN to GPIB gateway. VXI-11 compatible unit has sustained data throughput of more than 1 MB/sec, and is supported on Red Hat Enterprise Linux, Windows, and HP-UX. Meeting IEEE PoE standard 802.3af, it uses single CAT5 cable to provide both data and power to device.

DuctSox    Dubuque, IA 52002
Jul 11, 2008 Designed for larger fabric ductwork diameters in open architecture ceilings, 4x2 Suspension System(TM) simulates aesthetic inflated appearance even when heating/cooling air handlers are idle. Dual tension cables support duct clasps at 11 and 1 o'clock positions, while sculpted aluminum brackets support 10 and 2 o'clock positions with D-ring clips. Hanger system supports 50-60 in. dia DuctSox®, and factory-sewn D-clasps snap into ends of bracket to accelerate installation.

Midwest Motion Products    Watertown, MN 55388
Jul 11, 2008 Accepting any 24 Vdc source, Model MMP-TM55-24V GP52-195 features IP54 protection for operation in harsh environments and supports variable speed operation. Reversible product, which measures 7.75 in. long x 2.14 in. dia, weighs 3 lb and has peak torque output of 444 lb-in. It has 25 mm long x 12 mm dia keyed output shaft and requires 3.6 A at 24 Vdc to generate full load torque. Areas of use include battery-powered electric vehicles, robotics, and automation applications.

Taiwan Commate Computer Inc.    Taipei Hsien   Taiwan
Jul 11, 2008 Based on Intel® Q35 Express Chipset, HS-874P supports Intel Core(TM) 2 Quad processors or Intel Core 2 Duo processors up to 1333/1066/800 MHz system bus as well as 45 nm Intel Core 2 processors. It uses Intel GMA3100 for graphics and provides VGA/LVDS/DVI display support. Networking is provided by Intel 82573L Giga LAN, and additional connectivity of offered via PS/2, RS232C, and RS232/422/485 ports as well as USB 2.0 ports, 3.0 Gbps SATA interfaces, and programmable 8-bit DIO interface.

Mori Seiki USA Inc.    Rolling Meadows, IL 60008
Jul 11, 2008 With Z-axis rapid traverse rate of 32,000 rpm and Y-axis stroke of 2.16 ft, NT6600 DCG® provides maximum machining length of 19.93 ft. Automatic Tool Changer cuts tool change time to less than 10 sec from any position on spindle. Combining lathe with machining center, system includes direct drive motors to eliminate backlash and enable high-speed rotation. DCG technology minimizes vibration by pushing moving structural parts along simulated centers of gravity.

JBC Tools USA, Inc.    Cary, IL 60013
Jul 11, 2008 With up to 140 W of power, BT 8808 promotes throughput while working at lower temperatures. This fosters solder joint reliability and eliminates cold joint issues. For optimal thermal recovery times, station uses microprocessor-driven JBC Advanced Technology.

Montech, LLC    Huntersville, NC 28078
Jul 11, 2008 Consisting of self-moving shuttles that run along monorail track at speeds to 30 m/min, Montrac supports various components for operational efficiency. FlexTrac component, made of polyoxymethylene, makes it is possible to build sections with inclination up to 8% so Montrac can overcome height differences between machines/working stations. Touch-Panel component acts as independent direct addressing station that allows implementation of manual work stations.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Jul 11, 2008 For wear resistance necessary to mill hardened steel, GC1010 features thin PVD coating combined with fine-grained hard substrate, providing sustained surface finish and tight tolerances during long cutting cycles. Insert excels in processes ranging from roughing to finishing of tool steels, ISO-H hardened steels, and ISO-P steels. It can also be used to optimize productivity in finishing of ISO-K cast irons.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Jul 11, 2008 Featuring auto-darkening response time of 1/20,000 of 1 sec, Vintage USA helmet is stylized with 1929 Miller Logo, bald eagle, crest, US Flags, and patriotic stars. Elite version provides Auto-On/Auto-Off and Grind Mode in addition to 5 outside and 2 inside replacement cover lenses, fatigue-reducing comfort cushion, and helmet bag. Digital Elite includes programmable grinding, welding, cutting, and electromagnetic modes. Latter is used when arc is present but sensors are obscured.

Melexis Inc.    Concord, NH 03301
Jul 11, 2008 Available in 24 pin SOIC package that is compatible with lead free SMD processes, MLX75605 embeds 650 nm light source, 150 Mbps driver IC, and 150 Mbps monolithic receiver IC. LED driver IC includes on chip calibration circuitry, allowing user to trim transmitter light output, and in this way light output is within narrow distribution over -40 to +95°C temperature range. Receiver features integrated ferrule receptacles of both receiver and transmitter pigtails, and eye safe light output.

ON Semiconductor, LLC    Phoenix, AZ 85008
Jul 11, 2008 Capable of clamping input ESD waveform of 15 kV to less than 7 V in matter of nanoseconds, Models ESD7L5.0D and NUP4212 protect ESD sensitive ICs. Offered in 1.2 x 1.2 x 0.5 mm SOT-723 package, ESD7L5.0D protects 2 high speed data lines at 0.5 pF capacitance/line as well as D+ and D- lines of USB2.0 port. Available in 1.6 x 1.6 x 0.5 mm UDFN-6 package, NUP4212 protects 4 high speed data lines at 0.7 pF/line and 2 Vcc power lines as well as D+, D-, and Vcc line on 2 USB ports.

Grupo Premo    Barcelona   Spain
Jul 11, 2008 Measuring 76 x 16 x 5.5 mm for SMD assembly, PREMO antenna suits applications in 125 kHz low frequency base stations, and can be used in vehicles passive entry applications or TPMS (Tire Pressure Monitoring system). Transmitter antenna has inductance range of 200 µH to 1 mH with quality factors between 80 and 150.

Grupo Premo    Barcelona   Spain
Jul 11, 2008 Measuring 23 x 25 x 19 mm, PQ20 power inductor features 1.5-33 µH inductance range, up to 62 A current capability, and -40 to 125ºC operating temperature range. Meeting AECQ-200C standard, choke uses flat wire in winding to ensure maximum power management with less than 1.6 mW dc resistance. Placed in plastic base, it is suited for use in battery control unit, dc/dc converter and inverter, engine control unit, starter generator, transmission control unit, and water pump.

Grupo Premo    Barcelona   Spain
Jul 11, 2008 Available in 5.1 x 2.3 x 2.4 mm size, Telecoil TC0502 is a coil with ferrite core which offers high sensitivity in frequency range of 30-40 kHz. Customizable unit is winded with thin copper wire up to 12 µm and its inductance range is 20-170 mH. Meeting ISO/TS 16949:02 and ISO 9001:2000 standards, it is designed for hearing aid systems industry.

Richelieu Hardware Ltd.    Saint Laurent, QC H4S1V4
Jul 11, 2008 Enabling users to retrofit their halogen MR16 30 W fixtures, LED MR16 3 W Series suits applications such as retail and architectural lighting in showrooms and exhibits. Offered in cool and warm white, Series comes in 2 models, one that projects direct light beam at 30º, and second which projects wider beam at 45°. Featuring optical grade PMMA clear lens, molded aluminum with silvery anodized finish housing, and GU5.3 base (MR16), units provide low heat without UV or IR light radiation.

Ideal Industries, Inc.    Sycamore, IL 60178
Jul 11, 2008 Suited for forming new screw threads, cleaning out obstructions, or retapping burred and stripped threads, IDEAL Triple Tap features Santoprene® textured handle that reduces risk of repetitive strain injuries and provides slip-resistant grip, even when wet, while resisting damaging oils, fluids, perspiration, and abrasions. Rugged and compact tool is available in 3 thread sizes including 6-32, 8-32, and 10-24 (part number 35-411), or 6-32, 8-32, and 10-32 (part number 35-412).

Carl Zeiss Microimaging, Inc.    Thornwood, NY 10594-1939
Jul 11, 2008 Designed for routine applications in materials microscopy, Axio Scope.A1 includes 5 microscope upper bodies, 3 lower bodies, and 2 Vario columns which can be selected for respective requirements and combined into optimally customized microscope system. Sample area height can be continuously set up to 380 mm high, depending on configuration. Enabling C-DIC and PlasDIC techniques, unit offers 2-position sliders and 4- and 6-position reflector turrets as reflector modules.

Garmin International, Inc.    Olathe, KS 66062
Jul 11, 2008 Offering turn-by-turn, text-to-speech, voice-prompted directions, nuvi® 860 uses full menu speech control to make driving safer. Push-to-talk wireless remote, mounted to steering wheel, is used to activate voice commands, and built-in FM transmitter can route audio through vehicle's stereo. Along with emergency location assistance, functionality encompasses complex points of interest searches, completely hands-free interaction with mobile phone, and automatic route recalculation.

Laird Technologies    Chesterfield, MO 63017
Jul 11, 2008 Suitable for terminal, PoS, automatic meter reading, and M2M applications, External Wireless Antenna features knuckle/swivel snap-in or SMA/TNC/RPTNC connector option, allowing for integration into variety of devices. Operating frequencies include 824-894, 880-960, 1575, 1710-1880, 1850-1990, 1920-2170, and 2400-2500 MHz. With 7 bands operating simultaneously, blade-style antenna provides performance across Cellular Quadband GSM, UMTS/3G, GPS, and WiFi/WLAN frequencies.