Schaffner EMC, Inc.    Edison, NJ 08837
Jul 22, 2008 ECOsine(TM) load-applied passive harmonic filters are suited for 3-phase power electronics with 6-pulse rectifier front ends. With total harmonic current distortion of under 5%, products guarantee compliance with IEEE 519 and other international power quality standards. Two ranges are available, one for 380-500 V, 50 Hz grids (FN 3410 series) and one for 440-480 V, 60 Hz systems (FN 3412 series). Plug-and-play concept facilitates installation, wiring, and commissioning.

Asus Computer, Inc.    Newark, CA 94560
Jul 22, 2008 In addition to overcurrent protection, P5Q series incorporates ESD protection that surpasses EU static electricity standards - even for each USB port. ASUS Data Guardian (TPM support) protects data security by creating virtual folder protected by encryption key stored on USB portable drive. Without requiring drivers or complex setups, Drive Xpert enhances HDD operation while also securing stored data. Its GUI lets users arrange HDD backups or enhance their transfer rates.

Semikron International Dr Fritz Martin GmbH & Co      Germany
Jul 22, 2008 Featuring thermal resistance of 0.95K/W and junction temperature of +175°C, Miniskiip® IPM is developed for motor power up to 15 kW and has latch-up free SOI driver IC. Power, control, and auxiliary contacts are connected directly to PCB via springs, and snap-on mounting with one standard screw achieves assembly of module, PCB, and heat sink. Driver IC with advanced level shifter technology is responsible for enabling IGBT driving without optocoupler.

Maxim Integrated Products    Sunnyvale, CA 94086
Jul 22, 2008 Compliant with worldwide signaling regulations, MAX2990 power-line communication (PLC) modem employs broadband-communication techniques to deliver 2-way data communication over existing AC and DC powerlines. Integrated SoC uses OFDM technology with DBPSK modulation and forward error correction to provide reliable data communication in presence of narrowband interferers, group delays, jammer signals, impulsive noise, and frequency-selective attenuations.

GigOptix Inc.    Palo Alto, CA 94303
Jul 22, 2008 Comprised of 4 x 10.3 Gbps Transimpedance Limiting Amplifier (HXR4104) and 4 x 10.3 Gbps Vertical Cavity Surface Emitting Laser driver (HXT4104), HXR/T4104 chipset is fully programmable via 2-wire interface. This enables control of signal peaking, modulation, and average currents while also providing access to temperature and output power monitoring on channel-by-channel basis. Parallel VCSEL driver is compatible with QSFP Multi-Source Agreement (MSA).

Maxim Integrated Products    Sunnyvale, CA 94086
Jul 22, 2008 Designed to operate in harsh environments, MAXQ7665/MAXQ7666 mixed-signal MCU SoCs occupy 7 x 7 mm of board space and process magnetic sensor output signals in automotive as well as industrial applications. Both integrate all functions needed to measure signals from anisotropic magnetoresistive sensors, with accuracy of up to 8 µV, and transmit processed analog/digital data. Devices provide complete system solution for contactless sensing of linear or angular position/displacement.

Hitachi Global Storage Technologies    San Jose, CA 95193
Jul 22, 2008 Offered in capacities from 80-320 GB, Travelstar(TM) 7K320 features SATA 3 Gbps interface, average latency of 4.2 ms and average read time of 12 ms. Bulk Data Encryption option is also available (exclusively with SATA 1.5 Gbps interface) for increased data security. This 2.5 in., 7,200 rpm mobile hard drive provides 400 g shock protection and is optimized for acoustics, producing 2.5 Bels when idle and 2.8 Bels during nominal operation.

Hitachi Global Storage Technologies    San Jose, CA 95193
Jul 22, 2008 Available with 3 Gbps SAS or 4 Gbps FC interface, Ultrastar(TM) 15K450 uses PMR technology to deliver 450 GB storage capacity for mission-critical server and storage applications. This 15,000 rpm hard drive offers average seek times down to 3.3 msec and average latency of 2 msec. While fluid dynamic bearing motors minimize acoustic rating (3.7 Bels typ), Rotational Vibration Safeguard technology anticipates and counteracts disturbances stemming from multi-drive configurations.

Leadis Technology, Inc.    Sunnyvale, CA 94085
Jul 22, 2008 Suited for power-sensitive applications with headphone output, LDS9505 and LDS9504 incorporate Gmax(TM) technology for Class-G amplification and offer 5.5 mW/channel power dissipation to promote battery run-time. Adaptive Rail Amplifier and other technologies eliminate pop and click as well as zipper-noise concerns. Requiring 4 mW quiescent power, standalone products are capable of up to 63 mW in single-ended stereo and 106 mW in mono BTL output, with SNR of 102 dB.

Leadis Technology, Inc.    Sunnyvale, CA 94085
Jul 22, 2008 PureTouch(TM) LDS6010 and LDS6040 integrate haptics driver, designed to heighten responsiveness of tactile effects, for use with mobile phone touch-input controls. Driver supports ERM (eccentric rotating mass) and LRA (linear resonant actuator) vibration motors. Compatible with Immersion Corporation VibeTonz® advanced haptic platform for mobile phones, controllers feature 15 touch sensor inputs, consume less than 200 µW in full power mode, and have 1.8 V operating voltage.

Magma Design Automation Inc.    San Jose, CA 95110
Jul 22, 2008 Featuring physical optimization capabilities, Hydra(TM) takes timing, power, congestion, and area into consideration and generates implementation-ready floorplan. Floorplan synthesis and hierarchical design planning product combines automated chip planning, automated partitioning and physical block shaping, top-level clock-tree generation, and time budgeting for block-level implementation. Fully automated, shape-aware, and congestion-aware macro placer enables optimal placement.

NEC Electronics    Santa Clara, CA 95050
Jul 22, 2008 Based on enhanced multimedia architecture platform, EMMA3SL/HD(TM) and EMMA3SL/SD(TM) enable users to build STBs and DTVs with H.264 video compression standard. Former supports HD video broadcasts, while latter supports SD broadcasts. In addition to H.264-compliant video decoder, devices combine all key functions needed to receive and decode digital broadcasts. Other features include audio DSPs, EHCI-compliant USB 2.0 host controller, and IEEE 802.3/802.3u/802.3x-compliant Ethernet MAC.

Analog Devices, Inc.    Norwood, MA 02062-9106
Jul 22, 2008 Based on iMEMS® Motion Signal Processing(TM) technology, ADXL001 industrial vibration and shock sensor helps monitor equipment performance and reduce downtime due to unforeseen system failures. It is capable of early detection of motor-bearing vibration and irregularities up to 22 kHz, allowing continuous monitoring to be performed without interrupting normal equipment operations. Product is available in 3 FS dynamic ranges of ±70, ±250, and ±500 g.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jul 22, 2008 Supplied in 2 x 2 x 0.8 mm PowerPAK® SC-70 package, SiAx1xDJ series comes in various configurations: single, single plus Schottky, and dual devices in n-channel and p-channel as well as n- and p-channel complementary pairs. Voltage ranges are available from 8-30 V with on-resistance values down to 0.011 W at 4.5 V. Halogen-free and RoHS-compliant, products are suited for load switching and battery charging applications in portable devices.

Oki Electric Industry Co., Ltd.    Tokyo 105-8460  Japan
Jul 22, 2008 Compatible with slide and touch sensors, SDK for ML67Q5250 is comprised of evaluation board to develop fingerprint authentication systems and software. Fingerprint authentication LSI enables match-on-device, while touch sensor and driver software import fingerprint image. Interface helps connect desired sensor, and other applications can be developed using included I/O drivers and authentication libraries. Debugging can be done by connecting ARM-compliant JTAG ICE interface.

SatCon Technology Corp.    Cambridge, MA 02142 1221
Jul 22, 2008 Suited for commercial and large-scale grid connected photovoltaic power systems, PowerGate® Plus 75, 100, and 135 kW models are certified to UL1741-2005 standards and have California Energy Commission (CEC) efficiency rating of 96.0%. Products, optimized for energy harvesting and longevity, feature G90 galvanized steel enclosure, DSP control, as well as HMI with sunlight-visible display and membrane keypad.

Silicon Laboratories    Austin, TX 78727
Jul 22, 2008 Occupying 200 mm², Si823x ISOdriver Series integrates 2-channel isolator and dual driver into single chip. High-side, low-side, 4 A units feature propagation delay of 50 ns, optimizing timing margins and control response. Because devices are designed in CMOS, they do not suffer from performance drift over time and temperature. Integrated under-voltage lock-out circuitry prevents erroneous FET driver switching when input voltages are low during system start up/shut down.

Synopsys, Inc.    Mountain View, CA 94043 4033
Jul 22, 2008 DesignWare® System-Level Library features transaction-level models (TLMs) for PowerPC®, MIPS, and DesignWare IP, which are written in SystemC to work in any IEEE 1666-compliant simulation environment. TLMs enable users to build virtual platforms for early software development, hardware/software co-design, architectural exploration, and system verification. Virtual I/O capability allows communication over host Ethernet or USB connection of computer executing virtual platform.

Transistor Devices, Inc.    Cedar Knolls, NJ 07927
Jul 22, 2008 Designed for use with remote, outdoor cabinets, 1U Power Center helps manage site performance by providing -54 V power, rated up to 1,000 W, and signals for flush fans, door alarms, and other environmental controls. Single rack unit offers 2 hot-pluggable 500 W rectifiers that convert 90-276 Vac into DC, which is distributed through up to 10 GMT fuses. Connection to external battery has optional circuit breaker and low voltage disconnect for optimizing safety and performance.

Blasters, Inc.    Tampa, FL 33637
Jul 22, 2008 Available as truck-mount or tractor-mount system, Liquidator(TM) incorporates Vacuum Recovery Box with angled floor and self-dumping vibrator designed to optimize operation. Custom designed system delivers waster blast pressures from 20,000-40,000 psi for paint line removal, rubber removal, curbing compound removal, and coating removal from various asphalt and pavement surfaces on roadways, parking lots, and airport runways and taxi ways.