Touchstone Semiconductor    Milpitas, CA 95035
Jun 24, 2011 Supplied in 5-pin SC70 packages, TS9001-1 and -2 single-supply analog comparators incorporate +1.252 V reference with 1% initial accuracy and respectively offer push-pull and open-drain output stages. Both operate from +1.6-5.5 V supply while consuming less than 0.65 µA supply current. Input voltage range extends 200 mV outside-the-rails, and there is no phase reversal for overdriven inputs. Other features include crowbar-current-free switching and internal hysteresis for clean switching.

ebm-papst Automotive & Drives, Inc.    Dearborn, MI 48120
Jun 24, 2011 Compatible with ECI 63 and VDC-3-49.15 electronically commutated drive systems, Performax® Plus Gearboxes feature hardened steel housings for impact resistance in case of overload. Reinforced bearings in output stage provide for additional reserves in load transmission, allowing for gear reductions up to 204:1 and continuous torques of more than 60 Nm. Applications include industrial automation, intralogistics, and medical technology.

HABEY USA    City of Industry, CA 91748
Jun 24, 2011 Supplied on mini-ITX carrier board, SOM-6670 supports Intel Atom E6XX CPUs from 0.6-1.6 GHz with respective power consumption rates of 3.3-7 W. Integrated GMA600 graphics are based on 400 MHz PowerVR SGX mobile GPU, with hardware HD video encoding and decoding capability for display on dual independent screens. Other features include up to 2 GB DDR2 on-board memory and multiple I/O options, including USB 2.0, GbE, serial, CAN Bus, SATA, SD card, mini-PCIe, and PCIe x1.

Packnet Ltd.    Eagan, MN 55121
Jun 24, 2011 Available as product and service, Heat Shrinkwrapping can cover large products to protect against damage during transportation and storage. When properly applied, waterproof product will not move or chafe during transportation or storage, and shrinkwrap also protects against weather damage. Shrinkwrap can offer one-piece coverage for large objects, and covers can be ventilated or countermeasure options applied to eliminate moisture and mildew problems.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 23, 2011 Models 482C27 and 483C28 are designed for use with various sensor types, including differential MEMS, single-ended MEMS, bridge, and ICP®. Model 482C27 is 4-channel benchtop unit with front panel, RS-232, and Ethernet control, while Model 483C28 is 8-channel, 19 in. rack-mounted unit with Ethernet control. Both models offer features such as fine gain, AC/DC coupling, auto zero and balance, and constant current or DC voltage supplies. Control software is included for setup.

Mill-Max Mfg. Corp.    Oyster Bay, NY 11771
Jun 23, 2011 Providing connection between wires and PCBs, batteries, or other cable assemblies in test and field applications, Series 824/826 features spring-loaded pins rated 3 A max and high-temperature Nylon 46 insulators. Each spring pin provides .0275 in. of mid-stroke compression and is rated for 1 million cycles. Headers are available from 2-64 positions single row and 4-64 double row. Sized to accommodate up to 22 AWG wire, solder cup facilitates soldering of cable or discrete wires to spring pins.

DVEO division of Computer Modules, Inc    San Diego, CA 92127
Jun 23, 2011 Housed in 3U rack mountable frame, LogoSerter(TM) inserts graphics, logos, and text anywhere on H.264 or MPEG-2 video content. Real-time software-based system works by decoding transport stream, overlaying logo, and transcoding result. Graphics, logos, and text can be static, blinking, or rotating, and users can select any degree of transparency. Supporting 1080i, 720p, and 480i, system is available with DVB-ASI input and output or IP input and output.

Allied Vision Technologies GmbH    Newburyport, MA 01950
Jun 23, 2011 Supporting PoE, Manta G-145/30fps delivers 30 images/sec at full 1.4 megapixel resolution, while Manta G-201/30fps is equipped with 2 megapixel CCD sensor and achieves 30 fps. Four turned-head housings enable use in systems where depth clearance is tight. With Look-Up Table in firmware, individual parameters can be recalculated with individually programmable functions. Three transformations per image can be computed concurrently, allowing detailed color inspection in challenging applications.

E Instruments International LLC    Langhorne, PA 19047
Jun 23, 2011 With Model TCS 1200, users can verify and calibrate sensors, thermometers, and process transmitters in field and in laboratory. Portable unit features temperature range of 150-1,200°C with stability and radial uniformity of ±0.2°C at 1,100°C. Calibrator heats from 100-1,100°C in 20 minutes and cools from 1,100-800°C in 50 minutes with 15 minute stabilization time. Optional Black Body inserts are available to calibrate infrared thermometers.

JASCO, Inc.    Easton, MD 21601
Jun 23, 2011 Offering integrated solutions for advanced materials research and biochemical analysis, FP-8000 Series features sensitivity greater than 5,000 RMS and wide dynamic range of greater than 6.5 orders or magnitude. Units include automatic higher-order diffraction cut filter as well as auto-gain and auto sensitivity control system. To meet stringent analysis demands, accessories are available for integration with control and analysis applications in Spectra Manager(TM) II software.

WAGO Corp.    Germantown, WI 53022
Jun 23, 2011 Capable of processing up to 1,000 instructions within 235 µ, 750-880 Series ETHERNET 2.0 Programmable Fieldbus Controller relies upon TCP/IP stack and IEC61131-3 compatible environment. Via SD card, 750-880 expedites large-scale programming while increasing capabilities by transferring device parameters, boot files, or other file types between controllers. For data logging, 750-880 provides 1 MB of both program and data memory as well as up to 8 GB of supplemental memory from SD card.

Sensortechnics Inc.    Dublin, CA 94568
Jun 23, 2011 Based on thermal mass flow measurement of air or gas through micro-flow channel integrated within silicon sensor chip, LBA sensors feature full analog on-chip CMOS signal conditioning that allows for linear and temperature-compensated outputs. Measuring principle sensitivity lends to resolution and offset stability, while flow rate ensures immunity to dust and condensation. Also, connecting tubes and input filters can be used without recalibrating or correcting output signal.

Sensortechnics Inc.    Dublin, CA 94568
Jun 23, 2011 Based on ceramic pressure cells with optimal media compatibility, KMA Series measures gage pressures of corrosive and aggressive gases and liquids from 7-1,450 psi. Sensors utilize internal digital signal conditioning to deliver calibrated and temperature compensated 0.5-4.5 V output signals. Stainless steel housing is suited for space-saving integration into demanding OEM devices and machines. Custom pressure ranges and wide selection of pressure fittings are available.

Omega Engineering, Inc.    Stamford, CT 06907
Jun 23, 2011 Offered in shielded and unshielded models with short or standard length barrel, E2E-2DC Series features solid potted internal circuitry to withstand shock and vibration as well as exposure to cutting oils and washdown locations. Two-wire DC sensors are made of stainless steel or nickel-plated brass, and operate from 10-30 Vdc at temperatures from 13-158°F. Suitable for metal detection in food/pharmaceutical industries, units include prewired 6.6 ft PVC cable with stripped leads or M12 connector.

Kontron    Poway, CA 92064
Jun 23, 2011 Featuring Intel® Core(TM) i7 CPU and Intel QM 57 controller hub, 6U VM6050 combines x86 computing and graphics performance with flexible and modular expansion. Hyperthreading and Intel® Turbo Boost accelerate multi-processing and single-threaded tasks, while graphics applications benefit from Open GL 2.1 support and DirectX 10 capabilities. Along with many I/O and connectivity options, SBC offers up to 8 GB soldered ECC memory, on-board USB flash, and 2 mezzanine sockets for expansion.

Wilks Enterprise, Inc.    East Norwalk, CT 06855
Jun 23, 2011 With InfraSpec VFA-IR Spectrometer, chemical and pharmaceutical samples can be analyzed at remote locations without having to transport them to centralized laboratory, eliminating delay to off-load raw material. Portable, variable filter array unit has no moving parts or optical path exposed to air, making it insensitive to environmental changes. With spectrometer's integrated ATR sample platform, sample is deposited on crystal and, in less than 1 minute, material is verified.

GAO FiberOptics Inc.    Toronto   Canada
Jun 23, 2011 With output power adjustable according to need, model 5205 is suitable for fiber network installation, acceptance, and maintenance. It operates at wavelengths of 1,310/1,550 nm and 1,310/1,490/1,550/1,625 nm; uses FP-LD emitter; and features modulation frequencies are CW, 270 Hz, 330 Hz, 1 kHz, and 2 kHz. When used with model 5306 handheld optical power meter, unit can transmit wave ID information and offers testing solution on single- and multi-mode fiber.

CS Hyde Company    Lake Villa, IL 60046
Jun 23, 2011 Colored Cast Acrylic Rods feature clarity, resistance to heat distortion, and tensile strength that enable their use in place of extruded or molded acrylic. Unaffected by sunlight or fluorescent lights, impact-resistant rods resist aging and maintain stability under range of conditions. Stock colors are available, and rods can be cut to specific sizes. Custom colors can also be accommodated.

BorgWarner Inc.    Auburn Hills, MI 48326
Jun 23, 2011 Combining viscous technology with electronic control, Visctronic® Fan Drives operate only when needed and at appropriate speed, freeing up engine power and contributing to fuel economy. Through specifically calibrated software, drives communicate with engine's electronic control unit to continuously determine engine's cooling needs. Fluid-actuated valves and high-speed reservoirs deliver right amount of cooling when needed. As self-contained units, drives require no service or maintenance.

iDirect Technologies    Herndon, VA 20171
Jun 23, 2011 SatManage Standard provides Web-based tools that integrate, monitor, and automate satellite networks and Network Operations Center (NOC)-based applications. Solution targets mid-tier satellite operators that have networks with up to 1,000 VSATs and less complex requirements for mobile remotes and extended reporting. Visual correlation tracking and reporting tools, along with centralized monitoring dashboard, provide immediate visibility into network performance.