Munson Machinery Co., Inc.    Utica, NY 13503
Aug 04, 2008 Employed for coarse grinding of materials into particles of uniform sizes ranging from granules down to 20-30 mesh, Model SCC-15 Screen Classifying Cutter has 15 in. throat width and can be fitted with 30 parallelograms with 60 cutter inserts. Bed screen perforations range from 1/32 to 1½ in. in dia and up to 3 in. square, according to material characteristics and desired particle size. Shaft rotates at 30-3,600 rpm producing up to 500 cu ft/hr of sized product, depending on application.

C & M Corporation    Wauregan, CT 06387 0348
Aug 04, 2008 Reducing stress and strain from electrical conductors' termination points, hard/soft strain relief is engineered with anti-twist function as well as elimination of pistoning action of conductors inside cable jacket at termination point of assembly. It meets or exceeds straight pull test of its corresponding cable and connected assembly. Weighted 180° tick-tock flex tension testing achieves 750,000 cycles. Unit can be produced in PVC (and its alloys), polyurethane, and TPR.

GOEPEL electronics LLC    Austin, TX 78759
Aug 04, 2008 Able to completely test PCI Express Standard V2.0 compliant slots via dot1/dot6 for correct pin contacting, IEEE Std. 1149.6 compliant CION Module(TM)/PCIe-x(1/4) interface cards are plugged directly into x1 or x4 PCI Express slot and controlled by TAP (Test Access Port). With on-board IEEE 1149.1 and IEEE 1149.6 test channels, all high speed signal pins, low speed signal pins, and voltage supply pin of PCI Express compliant connectors can be tested structurally.

RedPrairie Corp.    Waukesha, WI 53186
Aug 04, 2008 RedPrairie Workforce Management employee self-service application allows employees to confirm their work schedules, check hours worked, submit time off requests, and receive other job-related information with secure web portal interface. Employees can also access work schedules through WAP-enabled device such as mobile phone or PDA. When manager approves request for time off, employee is notified and software does not schedule employee for that time.

Wagner Companies, The    Bulter, WI 53007
Aug 04, 2008 Enabling installer to fabricate tempered, structural glass panel railings, PanelGrip is locking assembly of high-strength aluminum, 2 PVC isolators, and aluminum shoe moulding that meets structural load requirements for railings. Requiring no special tools, product can be used with nominal ½ in. tempered glass or other ½ in. thick panel material, and allows for .450 to .515 in. range in glass thickness.

Synergis Software    Quakertown, PA 18951
Aug 04, 2008 Adept 8 Enterprise Document Management and Workflow helps clients manage, share, and control design and business documents throughout their lifecycle. It features full text searching, bill of material and transmittal automation, advanced workflow abilities, support for MicroStation® V8, and integration with 2009 family of Autodesk® design software. Document management capabilities include revision control, workflow, and audit trail.

GAO Tek Inc.    Toronto M1B2K4  Canada
Aug 04, 2008 Model GAO2250 8-bit, two-channel digital storage oscilloscope connects to any USB1.1 or USB2.0 equipped PC using Windows OS through USB for data transfer and power recharge. It combines functionality of spectrum analyzers, waveform recorders, signal generators, cymometers, voltmeters, acoustic analysis graphic instruments, mathematical related graphic instruments, and voltage meters. Measuring 190 x 100 x 35 mm, unit features 100 MS/sec real-time sampling and 40 MHz bandwidth.

Kaman Aerospace, Measuring & Memory Systems    Middletown, CT 06457
Aug 04, 2008 Universal ThreadChecker(TM) can discriminate between threaded and unthreaded hole, provides switched as well as high-speed analog output, operates with both ferrous and non-ferrous materials, and can be used with any size probe without recalibration. Including 2, 4, 6, and 10 mm dia probes for internal threads and 6 and 8 mm dia probes for external threads, it inspects internal thread sizes from M3-M14 and external thread sizes from M4-M10.

FilterSense    Beverly, MA 01915
Aug 04, 2008 B-PAC(TM) G3 Series Baghouse Diagnostic Control System wirelessly communications through Modbus or Ethernet options that communicate with up to 32 B-PAC dust collector control systems with one base radio. Base radios connect to FilterWare HMI/SCADA/EPA Compliance Software to obtain process control, maintenance, and EPA MACT compliance information. Suited for cement, mining, iron, steel and chemical plants, system contributes to lowering emissions and reducing energy use.

Michell Instruments    Rowley, MA 01969
Aug 04, 2008 Model S8000 Integrale Chilled Mirror Dew Point Analyzer achieves -85°F dew point even with ambient temperature of 104°F. Mirror microscope allows operator verification of state of condensate, and Frost Assurance System Technology (FAST) adds precision by forcing moisture to form frost below freezing point of water. Other features include intuitive menu system, multiple language display, and choice of housing.

Larco    Brainerd, MN 56401-0547
Aug 04, 2008 Offering 12 Vac, 24 ac/dc, and 12 Vdc capabilities, 433 MHz Wireless Automatic Door Control Receiver is compatible with all available automatic door controllers. Measuring 4¼ x 2¼ in., it employs code hopping-technology, and features activation time of 1.5 sec up to 4 hr and memorization of codes for up to 12 transmitters. With optional security layers, receiver makes it impossible to duplicate codes and restricts automatic door access to only activated key fobs.

Atrix International, Inc.    Burnsville, MN 55337
Aug 04, 2008 Omega Series Green Supreme vacuums come standard with true HEPA cartridge filter, 6 ft ESD safe hose, 16 in. ESD safe rubber flexible gooseneck, crevice tool, shoulder strap, and power cord. Vacuums safely cleans sensitive manufacturing equipment, electronics, cabinets, computers, and copy machines. Made from recycled plastic, units offer quiet operation at less than 70 dB.

CRC Industries, Inc.    Warminster, PA 18974
Aug 04, 2008 Foaming Coil Cleaner is high performance, heavy duty foaming alkaline detergent blend that cuts through dirt, grease, oil, and other types of residue. Low odor product does not require any rinsing and 360° spray value can be sprayed from any position, even upside down. NSF C1 and A1 Registered for use in meat and poultry plants, it contains no Class I or Class II Ozone Depleting Chemicals or chlorinated solvents and has no flash or fire point.

Creative Materials Inc.    Ayer, MA 01432
Aug 04, 2008 Offered for variety of application techniques such as screen-printing, pad-printing, stencil application, and B-staged films, 118-06 series of single-component, electrically conductive, epoxy adhesives are also available as adhesive films, pre-cast on release liner at dry thicknesses ranging from 10-125 microns. B-staged adhesive films are already partially cured and can complete cure with exact amount of heat/pressure for specific period of time.

General Monitors    Lake Forest, CA 92630
Aug 04, 2008 Designed for rapid detection of pressurized hydrogen leaks in vessels and pipes in open and ventilated areas, Gassonic Observer can detect leak initiation regardless of ventilation rate, gas dilution, or direction of leak, without gas having to make physical contact with sensor element. It has detection radius for hydrogen up to 8 m at leak rate of 0.01 kg/sec. Senssonic(TM) integrated acoustic self-test periodically verifies integrity of electronic circuitry and operation of acoustic sensor.

Methods Machine Tools, Inc.    Sudbury, MA 01776
Aug 04, 2008 Weighing 26,460 lb, Nakamura-Tome WY-250 multi-tasking turning/milling center features upper and lower Y-axis capability for milling or drilling simultaneously on both turrets. It includes 25 and 20 hp (left and right) spindle motors with Super Mill drivetrain milling motors on upper and lower turrets, offering 10 hp 40 Nm. Unit comes with 24 rotating, milling tool stations, 60° slant bed, maximum turning diameter of 8.5, and turning length of 23 in.

MTC Software, Inc.    Lockport, NY 14094
Aug 04, 2008 With drill, tap, and spindle operation support, ProNest handles requirements of plasma or oxyfuel cutting machines. It provides specialized sorting of part spindle operations as well as tool change and cycle parameter support. Depth of counterboring and countersinking operations can be controlled from CAD file through use of Blocks, and multi-step operations using multiple tools at variable depths can be defined in tooling library and called out in a CAD file.

Power Adhesives Ltd    Charlotte, NC 28209
Aug 04, 2008 TEC(TM) 6100 high output pneumatic hot melt glue gun features fully enclosed heater housing with silicon rubber nozzle shroud for user safety, power-on warning indicator light, PTFE barrel, and non-stick coated piston. Controllable melt rate with 2-piece flow nozzle enables smooth molten glue flow. Loaded with 1¾ in. adhesive cartridges, gun comes with twin 250 W steel heaters, up to 500 W of power, as well as audible and visual signal that minimizes down time.

ProComSol, Ltd    Lakewood, OH 44107
Aug 04, 2008 Based on SDC-625 technology, DevCom2000 PDA (Smart Device Communicator) for PDA platform allows access to all features and functionality available in HART device DD on handheld device, including monitoring and editing device variables and executing all device DD Methods. It turns PDA into HART device communicator that configures, monitors, and communicates with instrumentation and controls. Software can work with wireless modems and technology.

Edmund Optics    Barrington, NJ 08007
Aug 04, 2008 Available in 12.7 and 25.4 mm dia, Ultrafast Ti:Sapphire Mirrors keep pulses together with flat group velocity dispersion curves centered around 800 nm and flat over 700-900 nm range. They feature 6.35 mm thickness, 10^-5 surface quality, surface accuracy of 1/10 wave, and can withstand laser powers up to 0.5 J/cm² in 150 fs-long pulse or 100 kW/cm² CW. Units offer parallelism to within 5 arc-min, 85% clear aperture, diameter tolerance of +0.0/-0.2 mm, and ±0.2 mm thickness tolerance.