Silterra Malaysia Sdn Bhd    Kedah Darul Aman   Malaysia
Aug 21, 2008 Featuring 2.13 micron square SRAM bitcell optimized for high density embedded memory design for high resolution WQVGA, HVGA, and VGA TFT panels with 2.5 in. panel size and above, CL130H32 is 0.13 micron high voltage technology. It offers Asymmetry High Voltage Well for denser design, one-time-programmable cell for gamma color tuning and voltage trimming, ESD protection, and metal capacitors design guideline.

Bunkspeed    Los Angeles, CA 90064
Aug 21, 2008 Integrating full physics engine with powerful visualization, HyperMove allows users with no 3D experience to create animations of significant complexity. It simplifies task of rendering 3D models by providing users palette of photorealistic materials and accurate, real-time visuals. Software integrates with HyperShot renderer, and enables users to see 3D animation paths and control camera positions and change them interactively. HyperMove accepts models from common 3D CAD modelers.

Emerson Process Management    Austin, TX 78754
Aug 21, 2008 Designed for large industrial boilers and furnaces, Rosemount Analytical X-STREAM® Oxygen Analyzer features AccuMax(TM) accuracy specifications, extended temperature capability, and probe lengths of up to 18 ft. In situ combustion flue gas analyzer provides information to control fuel-to-air ratio of burner as well as indication of stratification of flue gases inside the furnace. It can be adjusted after installation and repaired without removing probe from furnace duct.

Liko, Inc    Franklin,, MA 02038
Aug 21, 2008 Viking M incorporates Liko Diagnostic System(TM) that allows customers to manage service and evaluate their lifting practices, tracks lift usage frequency, and identifies workload for patients of size. It features Wireless Hand Control system, NiMH battery pack, and SmartCharge indicator that offers continuous view of charging status. With frame made of aircraft-grade aluminum, unit provides key servicing information, including Service LED that can be calendar or usage-based.

XCBA Maritime Software Inc.    Cheltenham, AL GL50 3NY
Aug 21, 2008 Including Draft Survey 2008, Lashing Calc 2008, and Route Planner 2008 modules, Maritime Software Suite v6.5 offers draft survey, lashing calculations, and route planning solution, and complies with UN ECE standards and MSC "Code of Safe Practice for Cargo Stowage and Securing" (2003 Edition) (Annex 13) for draught surveying. Software runs under all Windows systems, and is compatible with all printer types.

Measurement Specialties, Inc.    Hampton, VA 23666
Aug 21, 2008 Available in rugged stainless steel package for stud mounting, Model 4801A offers amplified signal conditioned output in ranges from ±2 to ±500 g, and features ASIC that offers temperature compensation from -55 to +125°C. MEMS sensing element is gas dampened for optimum frequency response and includes mechanical over-range stop that offers shock protection up to 10,000 g. Hermetically sealed accelerometer can be used by test engineers preferring detachable cable assembly.

Littelfuse, Inc.    Des Plaines, IL 60016
Aug 21, 2008 Available in current ratings of 15 and 20 A with maximum fault current rating (Interrupt Rating) of 150 A at 24 Vdc, 0501 Series 1206-size surface-mount fuse provides operating current surge protection for high-current voltage regulator modules and dc-to-dc converters. RoHS compliant and UL and CSA approved low resistance device is lead- and halide-free, and can minimize trips during momentary overload conditions.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Aug 21, 2008 Including Models SEN040F and SEN041F with 1 and 10 mV/g sensitivity, respectively, Series SEN04xF measures workers' exposure to hand-arm vibration (HAV). Devices feature miniature 4-pin connectors, heavy-duty cables that interface directly with HVM100 Human Vibration Exposure Monitor, and low-pass filtering circuits that minimize false readings from shock and mechanical resonances. Accelerometers can be mounted onto range of mechanical adapters for HAV studies.

Panasonic Electric Works Corporation of America    New Providence, NJ 07974
Aug 21, 2008 With built-in fan and ac adaptor, SUNX ER-TF Series Wide Area Static Ionizer allows for self contained installation without need of external power supply or compressed air. It features swivel air outlet for free control over direction of ionized air and quick change needle discharge units for cleaning. Unit has photoelectric finger detection system, eliminating risk of shock. It is available in 400, 600, and 800 mm sizes, each with charge removal time of 1 sec (±1,000 to ±100 V).

Phidgets, Inc.    Calgary, AB T2M3R7  Canada
Aug 21, 2008 Designed to connect into analog input on 1018 PhidgetInterfaceKit 8/8/8 or on PhidgetTextLCD, Model 1122 AC/DC Current Sensor measures AC current up to 30 A and DC current from -30 to +30 A. Features include current conductor resistance of 1.5 mW, output impedance of 1 kW, and active current consumption of 10 mA. Maximum measureable AC frequency is 10 kHz.

W.A.C. Lighting Company    Port Washington, NY 11050
Aug 20, 2008 Crafted in sealed thermoplastic enclosure, InvisiLED Tape Lights use 2 W/ft, operate on 12 Vac Class II power supply center, and have life expectancy up to 50,000 hours. Measuring less than 1/8 in. tall and 7/16 in. wide, lights are spaced 1 in. apart and come in white, blue, red, green, and amber. Self-adhesive tape is designed with 3M(TM) adhesive backing and is available in 2 in. sections, as well as 1 ft and 5 ft sections that are field cuttable at end of each run.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Aug 20, 2008 Supplied in 4 x 7 x 1.59 in. package, CEF400-112C series provides 400 W of continuous power in 1U form-factor without requiring additional system airflow. There is one always-on, 5 V auxiliary output in addition to main 12 V output, and I²C interface allows monitoring of operating status. In addition to active PFC, features include N+1 redundancy with integral OR-ing FET and current sharing, Class B conducted EMI, integral fan, and on-board monitoring/control.

Dura-Belt, Inc.    Hilliard, OH 43026
Aug 20, 2008 Designed to replace one-piece line-shaft spools, Split Spools eliminate need to disassemble conveyor for replacement. Parts fit together precisely, so there are virtually no bumps or gaps that can abrade line-shaft belts. Alignment notches on one side allow installation by feel alone, so parts can be installed behind frames or guards. Made from Delrin® 500P, spools will not squeak.

EGS ELECTRICAL GROUP ? APPLETON    Rosemont, IL 60018
Aug 20, 2008 Model SCP100S24X-CP is used in physical layer of Ethernet/IP control power applications where power supply output is connected to ground, while SCP100S24X-DVN is used in physical layer of DeviceNet(TM) applications where power supply output is isolated from ground. Both are sealed in metal case with mini-change connectors that facilitate connectivity for distributed I/O devices on industrial machinery. Their 24 Vdc output meets Class 2 requirements for limited power.

Crowcon Detection Instruments Ltd.    Erlanger, KY 41018
Aug 20, 2008 Measuring 70 x 179 x 42 mm, LaserMethane® mini uses Tunable Diode Laser Absorption Spectroscopy to detect ppm levels of methane from distances up to 100 m. Portable, handheld solution features automatic ranging, color LCD, 5-hr battery, and IP54 construction. Zone 1 area rating allows for on-plant use as well as detecting escapes in hard to reach or inaccessible areas. Unit performs self-check on start-up and verifies operation and calibration of laser diode.

Advantech Automation Corp.    Cincinnati, OH 45240
Aug 20, 2008 Model IPPC-7157A 15 in. XGA TFT LCD Pentium D (up to 3.2 GHz)/Pentium 4 (up to 3.8 GHz)/Celeron D (up to 3.06 GHz) industrial panel PC supports ATX industrial motherboard with 7 PCI/PCIe expansion slots. It includes programmable membrane function keys and optional touchscreen that provides sharp images. Unit has heavy duty design with NEMA4/IP65 anti-rust aluminum front panel, detachable side-open front panel, and front accessible USB 2.0 port.

Trend Communications Ltd.    Maidenhead   United Kingdom
Aug 20, 2008 Trend Unipro GbE features Ethernet analysis capabilities that allow field engineers to carry out cable tests, PoE verification, and BERT. Traffic generation is also incorporated along with filtering and analysis, IP ping, and trace route. It executes RFC 2544 tests and verifies connectivity, frame transportability, and throughput. Handheld, impact resistant tool incorporates range of tests including verification of auto-negotiation when connecting nodes and VLAN configuration and routing.

Dongah USA    Richardson, TX 75082
Aug 20, 2008 Measuring 13.38 x 4.57 x 1.97 in. with integral IEC-320/C14 inlet, PSU-750 Series features universal ac input with active power factor correction, 0-45°C full load convection cooled operation, 1,500 W peak load capability for up to 5 minutes, and low frequency noise below 50 dB from 0.15-30 MHz. It meets international safety approvals including UL60095/CSA 22.2 No. 60095/TUV EN60095 for audio applications, CB Report, CE Mark (LVD), and Class B Emissions.

Panasonic Battery Div.    Elgin, IL 60123
Aug 20, 2008 With protective Heat Resistant Layer (HRL) technology that provides safe operation, Model CGR26650A lithium ion cell features Nickel Manganese based cathode material to offer high discharge rate of up to 40 A. Weighing 3.2 oz, unit operates over wide temperature range, and has nominal voltage of 3.6 V. It is suitable for multi-cell applications in wide range of industries such as portable power tools, back-up power, uninterruptible power supply, and medical equipment.

TE Connectivity Ltd.    Berwyn, PA 19312
Aug 20, 2008 Designed for PDUs requiring small form-factor interface, 20 A ET Connector offers integrated coding contacts which allow electronic functions to be designed into PDU electronics with activation on full insertion of cable connector. It uses crimp contacts from Standard Power Timer range, with current ratings of 20 A with 2.5 mm² cable. Unit is available in trays, with contacts on reels for customer assembly or fully assembled to specific customer requirements.