XP Power    Sunnyvale, CA 94085
Oct 19, 2011 Comprised of constant voltage and constant current LED drivers, DLG series meets needs of outdoor lighting, security, and machine vision applications. Waterproof units, efficient up to 90%, cover power ranges of 50, 75, 100, and 150 W. Available constant voltage outputs include +12, + 24, +36, or +48 Vdc, and +15, +30, +54, or +57 Vdc outputs are also available. Depending on power range, constant current outputs vary from 1.05-11.0 A. Input voltage varies from 90-305 Vac.

SemiSouth Laboratories, Inc.    Starkville, MS 39759
Oct 19, 2011 Dual-output, 2-stage, opto-isolated SGDR2500P2 is intended for use with power electronics modules that incorporate SemiSouth vertical-trench junction field-effect transistors (VJFETs) as primary switches. Board provides electrically isolated, high- and low-side outputs with peak current levels of +20/-10 A and self-generates isolated ±15 V supply voltages. Max switching frequency is 100 kHz, and duty cycle is adjustable from 0%-100%.

Spectro Analytical Instruments Inc.    Marlborough, MA 01752
Oct 19, 2011 SPECTRO xSORT energy dispersive X-ray fluorescence (EDXRF) spectrometer enables in-field elemental testing and spectro-chemical analysis of metals and other materials. Available with integrated video camera and GPS, instrument provides grade identification and material verification for metals and most alloys within 2 sec of clicking trigger; light-metal alloys require 12 sec to process. Other features include grade libraries, SDD detector, and detection limits down to ppm range.

ROHM Semiconductor USA LLC    San Diego, CA 92121
Oct 19, 2011 Enabling measurement of temperature, humidity, or carbon monoxide in small battery-operated devices, 8-bit ML610Q4xx Series features RC-type ADC that provides ±1.0°C accurate temperature measurement using only passive components. Versions are available with FLASH memory or masked ROM to store program that controls display, user interface, communication ports, and measurements. In-circuit programmable FLASH allows on-chip, non-volatile data storage and ability to make program changes in field.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Oct 19, 2011 By utilizing electromagnetic drive, fixed amplitude, and rubber spring mounts, Meinzer II Test Sieve Shaker produces simultaneous vertical and horizontal movement needed for basic dry particle sizing analysis. Portable unit has no moving parts and can run continuously for over ½ day. Equipped with built-in 60-minute timer, shaker is suitable for use with sand, cement, chemicals, and powder metals as well as grains, seeds, soils, and other dry components in ground, granular, or powder form.

Orange Research, Inc.    Milford, CT 06460
Oct 19, 2011 With respective ranges of 0-5 to 0-10 gpm, 0-15 to 0-40 gpm, and 0-50 to 0-200 gpm, models 2510FG/2520FG/2530FG feature 3.5 in. dials, ½-2 in. NPT porting, and long-life, wear-resistant design. Large-throated, non-clogging flow nozzles, manifold-mounted to gauge, have rounded leading face that reduces turbulence and backpressure, which minimizes pressure drop. All models have max line pressure of 275 psi, accuracy of 2% FS, max pressure drop of 5 psid, and turndown of 5:1.

Walter USA, Inc.    Waukesha, WI 53188
Oct 19, 2011 Featuring 4-margin design, 140° point angle, and L/D ratio of 3 x D, short version of Titex X•treme Drill is suitable for drilling angled entry/exit surfaces, convex workpiece surfaces, and cross holes. Internal coolant supply and aluminum chromium nitride-based XPL coating maximize tool life. Available from 1/8-¾ in. with cylindrical or whistle notch shank, drill is suitable for general machine construction and vehicle manufacturing as well as energy industry and die and mold industry.

Edmund Optics    Barrington, NJ 08007
Oct 19, 2011 With ray deviation of 90°, TECHSPEC® Broadband Anti-Reflection (BBAR) Coated Right Angle Prisms are suited for use with low-power laser sources. Products are most often used to bend image paths or redirect light at 90° angle but may also be used in combination for image and beam displacement applications. Featuring tight tolerances and precision N-BK7 substrate, prisms come in 5-50 mm sizes and with coatings for 425-675 nm, 400-870 nm, or 600-1,050 nm to meet specific application needs.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Oct 19, 2011 Suited for air and non-combustible compatible gases, Series AT2605 provides visual monitoring and electronic control of very low differential pressure. Dial gauge is complimented by 2-wire, 4-20 mA control signal utilizing Magnehelic® gauge mechanical design and Series 600 transmitter technology. Two-wire design simplifies any 4-20 mA control loop powered by 10-35 Vdc supply. Available in aluminum, flameproof ATEX enclosure can include gas window for viewing process pressure on gauge face.

Electro Standards Laboratories    Cranston, RI 02921 3403
Oct 19, 2011 Supplied in board-only configurations, Pathway® Models 4001 and 4002 allow sharing of 42 pins of device among 2 other devices and can operate as standalone switches or as master and slave pair. Units accept contact open/close signals from any external pushbutton switch to control sharing function and supply output signals indicating whether switch is in A or B position. In event of power loss, switches maintain last set position and continue to pass data.

RFX Limited    Scotland EH53 0TH
Oct 19, 2011 Housed in low-profile case measuring 36.0 x 26.5 x 8.5 mm, Model OX0325-1000-100 features 10 MHz CMOS output and frequency tolerance of ±0.02 ppm over 0-70°C temperature range. Oscillator runs from 5 V, draws 470 mA at switch-on, and averages less than 220 mA at 25°C after warm-up. Phase noise is -165 dBc/Hz at greater than 10 KHz offset. Mechanical shock, thermal shock and vibration can be specified to MIL standards.

SonicWALL, Inc.    Sunnyvale, CA 94089-1209
Oct 19, 2011 Application Traffic Analytics suite provides enterprise IT managers with insight into real-time and historical network bandwidth utilization, application traffic, security threats, and employee productivity. For enterprises, solution combines SonicWALL Next-Generation Firewall and either SonicWALL Global Management System (GMS) v7.0 or SonicWALL Scrutinizer. For SMBs, solution combines SonicWALL Next-Generation Firewall and either SonicWALL GMS 7.0 or SonicWALL Analyzer.

SAIC Corp.    McLean, VA 22102
Oct 19, 2011 Operating on Android(TM)-based mobile devices, GeoRover® Mobile enables collection of GIS data in field, with or without network connectivity. Program integrates GPS and Wi-Fi(TM) networks to provide current location data. Users can create waypoints, and track logs and routes when connected to internal/external GPS, including Bluetooth®, to obtain real-time connection. Using Map-Pack process, solution can create maps packaged with other layers to share information between desktop and mobile software.

EMC Corp.    Tampa, FL 33607
Oct 19, 2011 Built on platform designed to let enterprises record and analyze network traffic, RSA NetWitness® Spectrum automates identification, analysis, and prioritization of malware-based threats to networks missed by other preventative tools. Analytical workbench is engineered to analyze all executable content going across network by answering thousands of questions about behavior of files. Also, intelligence partners expand community of expertise from which solution draws its situational awareness.

Osram Sylvania, Inc.    Danvers, MA 01923
Oct 19, 2011 ULTRA LED A Line omni-directional light bulbs are available for replacement in two wattages. The 8 W is equivalent to 40 W incandescent and 13.5 W is equivalent to 60 W incandescent. ULTRA LED BR 30 and 40, which serve as replacements for equivalent 65 W incandescent models, come in 15 and 18 W varieties and offer options for spot or flood lighting. All products carry 25,000 hr life rating and produce soft white light (2700K).

OS33, Inc    Brooklyn, NY 11201
Oct 19, 2011 OS33 Cloud Drive creates unified file system by bringing storage from different private and public cloud technologies. Leveraging OS33 Webtop with Cloud Drive technology, end-users can access their files from any device across cloud-based and local applications. Solution acts as gateway for Service Providers and their customers by unifying storage capabilities of Amazon Simple Storage, SharePoint 2010 Doclibs for ECM, and MS Windows® on NTFS and DFS.

Hitachi America Ltd., Industrial Systems Division    Tarrytown, NY 10591
Oct 19, 2011 PH Series continuous inkjet printer employs ink circulation system that optimizes operation while minimizing fluid consumption and evaporation. Rigid, cast aluminum printhead with automatic nozzle and gutter cleaning promote reliability, and IP55 stainless steel cabinet facilitates integration within production lines. Available with fluids free of chrome-complex dye and ethanol-based inks, printer allows access to filter assemblies from front panel and tool-free replacement.

Hyde Industrial Blade Solutions    Southbridge, MA 01550
Oct 19, 2011 Suited for knives used by professionals to cut, sheer, trim, slit, or slice materials on line or in field, Heat Resistant Hand Knife Handles are made from composite nylon-based material and will not transfer heat to hands when used on blades heated to 500°F. These plastic/resin handles will not crack or splinter, and non-absorbent nature prevents spread of contamination. Products can be utilized on most square point, v-trim, ply, and hook knives and fitted for custom-shaped blades.

PB Swiss Tools    Gainesville, GA 30501
Oct 18, 2011 Supplied in roll-up case, PB Swiss Tools 8220 Toolkit accommodates needs of those who install, maintain, and troubleshoot PCs, workstations, and more. Features include flat, Phillips, Torx®, and 5 mm socket screwdrivers as well as interchangeable blade assortment. While slender round form foster precision work, structured, slip-proof surface promotes safe screw tightening/loosening. Precision screwdrivers feature rotating cap and round shaped handle end.

Rockford Systems, Inc.    Rockford, IL 61109 2695
Oct 18, 2011 Consisting of impact-resistant, transparent polycarbonate with aluminum profile support, Electrically Interlocked Grinder Shields protect operator from flying chips and coolant. Shields offer horizontal and vertical adjustment with steel arm for mounting. When shield is swung out of position, positive contacts on microswitch open, sending stop signal to machine control. Use of shields exceeds OSHA and ANSI safety requirements.