Acuity Brands Lighting    Conyers, GA 30012
Jul 01, 2011 Suited for parking lots and walkways, Tersen Ratio 1.5 supports 48 LEDs that produce illumination equivalent to 175 W metal halide lamp. Unit has finned shape that serves as both heat sink and architectural statement, and luminaire achieves 50,000-hr life at 1,000 MA with 70% lumen maintenance. American Electric Lighting® AVPL(TM), featuring die-cast aluminum construction and Valiant Colonial-style dayform, offers LED post top lighting for local roads, commercial streetscapes, campuses, and green spaces.

Industrial Minerals Corporation Limited    Coos Bay, OR 97420
Jul 01, 2011 Featuring spherical nature and uniform grain sizing, SpheriChrome(TM) provides iron and steel foundries with specialty casting sand that enables production of high-quality products while reducing after casting defects and emissions. Additional benefits include ability to pack in molds tightly for smooth cast finish, optimize tensile strength, and minimize finishing/cleaning costs.

Evatronix SA    Bielsko Biala   Poland
Jul 01, 2011 USBHS-PHY provides complete, mixed-signal transceiver macro-cell that implements USB 2.0 physical layer for host and device applications. Compliant with UTMI+ specification, solution features built-in self test, self calibration termination, and pull-up resistors for seamless operation. Compliant with all relevant layers of USB specification for High, Full, and Low Speeds, PHY also supports 3.3 V analog and 1.8 V digital core supplies, both with 10% of voltage tolerance.

Amplitude Technical Sales    Doylestown, PA 18901
Jul 01, 2011 American Technical Ceramics' 506WLC Series offers inductance values from 2.0-11 µH, insertion loss from 0.4-0.6 dB, and flat frequency response. With powdered iron (ferrite) core and gold plated terminations, products are engineered for performance through 40+ GHz. Areas of use include circuit-level and system-level RF and microwave applications, including high-speed optical data systems, trans-impedance amplifiers, and broadband test equipment.

Mettler-Toledo    Bedford, MA 01730
Jul 01, 2011 Using fit gap analysis, GWP® Verification Service measures manufacturer's balance performance against accuracy requirements as well as standards of balance's OEM. Service uncovers whether customer's current tests and testing schedule can ensure accuracy by assessing current performance versus ideal operating standards. If they cannot, metrology experts make recommendations that establish helpful weight classes, safe-range nominal values, and effective testing frequencies.

Thwing-Albert Instrument Co.    West Berlin, NJ 08091
Jul 01, 2011 Equipped with multi-line display, Inkometer 1100 measures apparent tack of printing inks under conditions that closely approximate dynamic conditions of ink-distribution system of printing press during printing. In addition to 4 pre-defined ASTM D-4361 based test methods, Inkometer 1100 allows for storage of 5 user definable methods. Unit stores up to 180 tack readings per test, which can also be transmitted via RS-232 port or exported to USB flash drive.

Microsoft Corp.    Redmond, WA 98052-6399
Jul 01, 2011 Bringing together MS Office, SharePoint Online, Exchange Online, and Lync Online, Office 365 lets users work on files and documents at same time and share ideas as well as calendars. Tools make enterprise-grade email, shared documents, IM, video and web conferencing, portals, and more available to each user. Offered in 40 markets, cloud service fosters communications and is offered in various service plans to suit businesses of all sizes.

DesignLED    Shenzhen   China
Jun 30, 2011 Suited for rental and fixed installations, rubber-based Flexible LED Video Screen utilizes 320 x 160 x 12 mm tiles, each weighing 0.5 kg. Unit features 7.62 and 10 mm pixel pitch with brightness levels of more than 1,500 nits and 1,200-4,800 Hz refresh rate. Since tiles are flexible and bendable, users can create LED displays in curve, wave, arch, round, and right angle configurations. Full magnetic system on each tile enables unit to be attached to any metal surface.

Balluff, Inc.    Florence, KY 41042-0937
Jun 30, 2011 Available in 11 pressure ranges from 0-8,702 psi, Pressure Sensors combine 4-digit display, measuring transducer, and pressure switch into single device. Display shows current system pressure in bar, mbar, psi, or MPa. With IP67-rated housing and ceramic thick film measuring technology, sensors are suited for use in gaseous and liquid media. Stainless steel versions, featuring extended temperature range of -40 to 125°C, withstands harsh environments.

Wilmington Machinery, Inc.    Wilmington, NC 28406 7308
Jun 30, 2011 Featuring 14.5 x 5 m footprint, Lumina Pallateer No. 4 Plastic Pallet System utilizes extruder capable of melting 2,400 lb/hr and can produce 960,000 nestable one-way 48 x 48 in. or 1,200 x 1,200 mm pallets/year. Fully automated production cell includes top entry stacking robot, blender, loaders, nitrogen gas generator, mold cooling water chiller, and 2 stack type dual cavity aluminum molds with support beams.

Curtis Industries, LLC    Worcester, MA 01606
Jun 30, 2011 Available in 5-8 ft models, Sno-Pro Front End Loader Plow Blades are made of 11 gauge powder coated steel with 4 ft push frame and high carbon steel reversible cutting edge. Four heavy-duty trip springs provide protection against blade damage from obstructions, and guide markers enable location of blade edge/corners. Recommended for tractors and skid steers up to 47 hp with quick-attach front mounting adapters, blades are suited for pushing snow, aggregate materials, and livestock feed.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Jun 30, 2011 Featuring on-chip PMBus support, Models LM5066 and LM5064 operate over input voltage ranges of 10-80 V and -9 to -80 V, respectively. Integrated system protection and management blocks precisely measure, control, and manage electrical operating conditions in systems such as routers, switches, and base stations. Both models have selectable 25 mV/50 mV current limit thresholds for addressing wide range of intermediate bus voltages and load currents.

IBASE Technology Inc.    Taipei   Taiwan
Jun 30, 2011 Measuring 186 x 129 mm, IB825 is based on Intel® 945GSE Express Chipset and comes with 1.6 GHz Intel® Atom(TM) N270 CPU featuring 533 MHz FSB. Intel® Graphics Media Accelerator 950 supports dual-independent displays with CRT and LVDS interfaces, while DDR2 DIMM socket fits up to 2 GB system memory. For connectivity and expansion, computer offers 2 Gigabit LAN, 3 serial, printer, 2 SATA, and four 2.0 USB ports as well as watchdog timer, DIO, and PCI to ISA bridge.

O.BERK Co.    Union, NJ 07083
Jun 30, 2011 Made of rugged natural HDPE and offered in 16 oz to 2 L capacities, Bettix(TM) bottles have twin neck design and 2 cavities that enable users to measure and pour in one motion. Larger side acts as main repository, while smaller chamber is used for dispensing. Liquid is transferred between chambers by squeezing, eliminating need to pour from one container to another. Both cavities have gradient measurements and plugs to prevent dual pours.

DSL    Letchworth Garden   United Kingdom
Jun 30, 2011 Powered by fanless 800 MHz Vortex86DX processor with 256 MB DDR2 RAM, 90 x 96 mm ICOP-6357 controller offers three 10/100 Mbps LAN interfaces, 4 serial ports, and 2 USB ports for connectivity. LCD interface supports resolutions to 1,280 x 1,024, and overall power consumption is rated at 800 mA. Backwards compatible for existing x86-based PC104 controllers, product operates from -20 to +70°C as standard or optionally from -40 to +85°C.

Acromag, Inc.    Wixom, MI 48393 7037
Jun 30, 2011 By routing power and bus signals to 4 IndustryPack mezzanine modules, Model APCe8650 creates custom I/O processing boards with PCI Express interface for use in PC-based control systems. Card supports any combination of standard, single-width ANSI/VITA-4 IP modules to offer flexibility in performing variety of I/O signal processing tasks. Residing in memory space, Model APCe8650 features plug-and-play carrier configuration and supports IP module I/O, ID, INT, and MEM spaces.

Double H Plastics, Inc.    Warminster, PA 18974
Jun 30, 2011 Fabricated from high-impact polystyrene, Corner Board PDH(TM) protects edges and corners of load from damage, provides vertical stability, and shields areas gripped by strapping. Product can be sterilized and is inherently non-microbial and anti-bacterial. Available in standard sizes of 3, 36, 42, 48, and 60 in., U.S. manufactured corner board comes in black or white and is also waterproof, weather resistant, reusable, and recyclable.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Jun 30, 2011 Series 2700 and 2700T are designed for use in consumer electronic device applications where low profile is crucial. Measuring 9.0 x 7.7 x 1.65 mm, 2700 series offers inductance from 4.7-1,000 µH and device-dependent max DC current up to 1.6 A. DC resistance is 0.1-14 ohm for 1 mH part. Offering inductance values from 1-330 µH, slightly smaller 2700T series has max operating current up to 2.0 A. DC resistance is 80 mohm for 1 µH part and 15 ohm for 330 µH inductor.

PIRTEK USA    Rockledge, FL 32955
Jun 30, 2011 Designed to minimize engine and component wear, Bypass Filter Unit does not replace existing filter but is added into existing lubricating or hydraulic system, allowing oil to flow through dense filter cartridge at 2-3 quarts/min. At this speed, it is possible to remove particles down to 1 micron and remove over 99% of all water. Featuring single canister design, filter unit has no internal moving parts and requires no electrical hook up.

Newson Gale, Inc.    Lakewood, NJ 08701
Jun 30, 2011 Housed in powder-coated steel, Model VESM02 provides static ground protection for difficult field applications such as tanker trucks, rail cars, IBCs, and mobile tanks or drums. NEMA 4/IP56-rated unit is fitted with 50 ft of Cen-Stat(TM) Static-Dissipative Hytrel(TM) protected cable with adjustable ball stop, which is held under constant tension by spring/auto-locking device. Main cable is pre-terminated by additional 10 ft of 2-conductor cable to facilitate connection to Earth-Rite grounding system.