Summit Microelectronics, Inc.    Sunnyvale, CA 94085
Oct 21, 2011 Housed in 5 x 6 mm QFN package, Models SMB220/SMB221 feature onboard MOSFETs that supply up to 10 A/20 A output current. Input voltage is +4.5 to +16 V and output voltage is +0.5 V to VIN, accurate to ±1.5% over load/line/temperature. With serial digital interface and on-board non-volatile memory, devices can be configured during development and re-programmed in system by host software. Output voltage is digitally programmable in 10 mV steps up to 2.5 V and 20 mV steps up to 5.0 V.

Edwards Vacuum Technology    Wilmington, MA 01887
Oct 21, 2011 Suited for liquid and solids handling in chemical, petrochemical, and pharmaceutical processes, CXS Pumps offer vacuum down to 10^-3 mbar with no contamination of process stream or cooling water and no effluent generation. Tapered screw technology gives smooth, gradual compression along length of rotor for optimized pumping at all inlet pressures. Independently certified for hazardous environments, units can pump up to 1 L of liquid/min continuously and up to 25 L slugs without stopping.

LOC-AID Technologies, Inc.    Boca Raton, FL 33432
Oct 21, 2011 With Instant Locate web-based mobile location portal, mobile developers can enter phone number of any opt-in mobile device and locate subscriber. Service uses location data from top wireless carriers in North America, is 100% privacy-protected, and works for any mobile device on carrier's wireless network. Using service, educational institutions can increase campus safety, M2M businesses can track fleets, and retail businesses can track inventory.

Neudesic, LLC    Irvine, CA 92618
Oct 21, 2011 With Social Tasks feature, Neudesic Pulse 2.0 makes process of assigning, tracking, and managing tasks social. Users can create conversation around task, making project management more collaborative. Integrating with MS SharePoint, software lets users have conversations at document level, follow documents in SharePoint, and be notified when changes take place. Groups feature enables users to share files and links, assign tasks, and find answers and experts from one location.

MT2    Arvada, CO 80004
Oct 21, 2011 For GPON-ONU certification of BroadBand Forum's (BBF) BBF.247 program, MT2 testbed uses one OLT emulator (eOLT-GPON), independent of any chipset or commercial OMCI stack, to ensure neutrality. Passive Continuous Real-Time analyzer for GPON signals, NIVA-GPON analyzer, is used separately for impartial monitoring. Testbed generates and analyzes PLOAM, OMCI, GEM, and Ethernet messages according to BBF.247 tests, and verdict is automatically given according to test-case criteria.

Model Actuarial Pricing Systems    Schaumburg, IL 60173
Oct 21, 2011 Model Actuarial Pricing Systems (MAPS) software lets investors apply premium optimization and longevity assumptions to actuarially correct model to calculate present and future value of life insurance policies/portfolios. Web-based MAPS Policy Model v2.0 integrates individual policy and portfolio valuation models and provides flexible portfolio construction and analysis while coordinating management under various modeling scenarios. Users can also track and incorporate actual paid premiums.

BelAir Networks Inc    Ontario K2K 2M5  Canada
Oct 21, 2011 With base station sized to reduce small cell CapEx and OpEx in dense metropolitan areas, BelAir2100 supports multiple licensed bands, Carrier Wi-Fi access, as well as integrated wireless and wireline backhaul options. Solution can be deployed outdoors and supports Hotspot 2.0 (including 802.11u) standards for seamless secure roaming. Scalable management supports up to 100,000 metrocells in one network, and edge-based policy enforcement interfaces with carrier's policy management system.

New Pig Corporation    Tipton, PA 16684 0304
Oct 21, 2011 UN-rated for solid hazardous materials shipments, PIG(TM) Drum Containment Bag provides secondary containment and way to hoist containers on and off truck for field-to-shop mobility. Puncture-resistant, PVC-coated shell clips shut to keep rainwater out, while abrasion-resistant bottom enables bag to be dragged across gravel and other rough surfaces. Removable poly liner contains leaks and drips inside of bag and can be cleaned and re-used.

New Pig Corporation    Tipton, PA 16684 0304
Oct 21, 2011 Suited for cleaning up large quantities of transformer oil leaks or spills outdoors, PIG® Transformer Spill Kit contains enough oil-only absorbent mats, pillows, and booms to absorb up to 40 gallons of transformer oils on water or land. Opaque, UV-resistant polyethylene container blocks sunlight from degrading both contents and container for up to 8,000 hours. To protect against pilfering, kit features leakproof, twist-on lid and tamperproof seal.

Royal Products, Div. Curran Mfg. Corp.    Hauppauge, NY 11788
Oct 20, 2011 Available in 4 sizes from 275-1,200 cfm, Royal Filtermist FX-Series features flexible design that enables mounting directly to top of machine tool, on stand, or from factory ceiling (suspended). Use of this product helps reduce problems, such as health and accident risks, associated with oil mist while also reducing requisite cleaning and maintenance. This improves productivity by reducing machine downtime.

Pentek Inc.    Upper Saddle River, NJ 07458
Oct 20, 2011 Based on Xilinx Virtex-6 FPGA preconfigured with data acquisition and playback IP, Cobalt(TM) 71651 has 2 input and 2 output RF channels, transformer-coupled to allow direct connection to HF or IF radio stages. Input channels feature 12-bit, 500 MHz A/Ds that feed data into Virtex-6 FPGA, while output channels incorporate TI DAC5688 digital upconverter that translates baseband signals to IF frequency up to 380 MHz. Dual 16-bit, 800 MHz D/As create real or in-phase and quadrature analog outputs.

TE Connectivity Ltd.    Berwyn, PA 19312
Oct 20, 2011 Miniature ALCOSWITCH Blue Series is available in SPDT and DPDT configurations with push-on/push-off or momentary function. Push-on/push-off versions produce tactile, audible feedback. Equipped with silver inlay brass contacts, switches are rated up to 250 Vac at 1.5 A for European applications and up to 125 Vac at 3 A for North American applications. Optional gold plating is available for signal transmission up to 60 mA at 30 Vdc. Switches can be used at operating temperatures between -20 and 80°C.

Triad Magnetics    Corona, CA 92883
Oct 20, 2011 Along with magnetics designed to eliminate common noise to all lines in power supplies, CMT-8100 Series features rugged construction for high-temperature applications in electronics operating environments. Series operates from -55 to +105°C, with rated current yielding temperature rise of ~35°C, and offers minimum inductance per winding from 1-50 mH, current rating from 1.7-20 A, and DCR range of 0.006-0.45 ohm. Products meet VDE, IEC, UL, and CSA requirements.

Guardair Corporation    Chicopee, MA 01020
Oct 20, 2011 Available in 24, 36, 48, 60, and 72 in. lengths, Force 5® gun delivers power necessary for heavy-duty industrial cleaning and maintenance applications. Field tests revealed output thrust capability of 302 scfm; there was less than 30 psi at tip when dead ended. Fully portable, U.S. manufactured product features all-metal construction, ¾ in. FNPT inlet, ergonomic handle, and adjustable auxiliary handle. Extended trigger allows full hand actuation.

Larson Electronics, LLC    Kemp, TX 75143
Oct 20, 2011 Constructed of aluminum, powder-coated LEDWP-250 has 50,000 hour LED operational life, operates from 110-270 Vac, and is ETL-approved for use in wet locations. Twelve 3 W LEDs, paired with reflector assembly, produce illumination for wall pack lighting and down lighting, upwards lighting, and security lighting systems. Adjustable through 380°/180° of rotation, fixture features shatterproof polycarbonate lens with water-tight seal and ½ in. water-tight power connector fitting.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Oct 20, 2011 Providing 250 g range and 20 mV/g sensitivity, Model 3315A has upper frequency response of 10,000 Hz. Unit features built-in electronics, eliminating need for external charge amplifier and converter. Housed in stainless steel with radial 2-pin bayonet-style connector and ¼-28 mounting stud, Model 3315A includes internal case ground isolation to avoid EMI/ground loop interference, and hermetic sealing for operation in high-humidity and dirty environments.

BEI Sensors (BEI Industrial Encoders)    Goleta, CA 93117
Oct 20, 2011 Hollow shaft encoder, HS52, can operate directly in Division 1 and Zone 1 environments, where ignitable concentrations of flammable gases, vapors, or liquids are likely to exist under normal operating conditions. Product does not require accompanying intrinsic safety barrier, and enclosure can withstand and contain internal explosion of most volatile gas-to-air mixtures. Fitted with flexible shaft bore design, housing can be rigidly mounted.

CMM Dynamics Inc.    Apollo, PA 15613
Oct 20, 2011 Vision Slide® is suited for locating part or fixtured parts on CMM, CNC, or multi-sensor vision systems used for manual and/or automatic dimensional measurement. Solution ensures part is secure against working surfaces by using shielded concentrated earth magnets, which facilitates locating part precisely and repeatably on machine staging surface. Adjustable slide scale in X and Y axes lets operator/programmer choose multiple coordinate positions: A-G in Y-axis and 1-9 in X-axis.

HaydonKerk Motion Solutions    Waterbury, CT 06705
Oct 20, 2011 Allowing small-footprint linear actuator system for precision motion applications, Kerk® RGS/RGW linear rail platform features 180° folded-over motorized design. It contains all components needed for complete motion subassembly, including stepper motor, belt and pulley, precision lead screw, bearing supports, and rail with load carriage. Standard drive ratios available from motor to screw are 2:1, 1:1, and 1:2, and available screw leads range from 0.050-1.2 in./rev.

Lowell Corp.    West Boylston, MA 01583
Oct 20, 2011 Designed with ¾-14 threads to accommodate most professional quality slide hammers with self-tightening pull clamp, Model CL0199SH features conical base that is compatible with many clamps from other manufacturers in addition to Porter-Ferguson clamps. USA-made adapter gives auto body repair technicians more precise control over pulling operations that is possible with standard tightening pull rings.