Tersano (International) SRL    Buffalo, NY 14225
Sep 10, 2008 Offered as EPA-registered substitute for multiple chemical-based cleaners in commercial settings, lotus® Professional Cleaning System exhibits functional versatility as chemical-free cleaning, sanitizing, deodorizing, and stain-fighting agent. Oxyshield(TM) process turns tap water into harmless sanitizing agent capable of removing 99.99% of all toxins, germs, and bacteria on surfaces and objects.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Sep 10, 2008 Combining 14-bit ADCs in interleaved fashion with Xilinx® Virtex®-5 FPGA, ADS5474ADX-EVM is used to create 800 MSPS digitizer solution and enables rapid prototyping of interleaved system for wide-bandwidth applications. FPGA comes with SP Devices' time-interleaving technology to eliminate interleaving spurs, and software continuously monitors system and removes ADC gain, clocking, and temperature mismatches. This increases spurious free dynamic range to 86.44 dBc for 70 MHz input.

Toshiba America Electronic Components (TAEC)    Irvine, CA 92618-1811
Sep 10, 2008 Designed to promote efficiency of switched-mode power supplies, 600 V DTMOS II superjunction MOSFETs include 12, 15, and 20 A versions offered in 4 package choices each with sizes from 9.2 x 10.7 x 3.0 mm to 15.9 x 23.3 x 4.8 mm. Superjunction structure enables simultaneous reduction in on-state resistance and gate charge. Respective max on-resistance values for 12, 15, and 20 A devices are 0.4, 0.3, and 0.19 W, and respective gate charge ratings are 14, 17, and 27 nC.

Oasis Manufacturing    Laguna Hills, CA 92653
Sep 10, 2008 Featuring continuous-duty design, 12 Vdc XD4000 Series is equipped with forced air motor and compressor cooling system. Deep finned head and compressor body is cooled by 100 cfm fan built into housing shroud, while internal fan cools modified 5 hp electric motor. Impermeable sealed lubrication system virtually eliminating outside contaminants and oil emissions. Utilizing oil control piston rings, Anti Blow By Design minimizes crankcase lubrication discharge into compressed air supply.

Z-Communications, Inc.    San Diego, CA 92126
Sep 10, 2008 RoHS-compliant CRO5550Z-LF operates from 5,450-5,650 MHz (using internal doubler) with tuning voltage range of 0.5-15 Vdc. It features typical phase noise of -104 dBc/Hz @ 10 kHz offset and typ tuning sensitivity of 20 MHz/V. Designed to deliver typical output power of 3 dBm at 5 Vdc supply while drawing 120 mA (typ) over -40 to +85ºC range, product offers typical second harmonic suppression of -15 dBc and comes in 0.63 x 0.866 x 0.22 in. package.

SunGard    Littleton, CO 80120
Sep 10, 2008 Designed for flexibility and connectivity, Ambit Messaging Hub offers single operation Web interface for business and IT users that can be customized to individual/group requirements. Database-agnostic product also supports all SWIFTNet services and will serve as FIN connector as well as SIC and Secom interface for SWISS market. Hub supports any message standard, XML and non-XML, and allows codeless transformation definition within context of customer's business logic.

3M Co., Electronic Products Div.    Austin, TX 78726
Sep 10, 2008 Designed for internal and external cabinets, Round, Jacketed, Flat Cables Series 3758 and 3896 enable mass termination to broad line of insulation displacement connectors. Series 3758 1.27 mm pitch PVC insulated cable is useful for long transmission distances due to its 26 AWG wire size and is available in conductor counts up to 64. Offered in conductor counts up to 100, 3896 series 30 AWG stranded PVC insulated cable allows for high signal density due to its 0.635 mm centreline.

IMO Precision Controls Ltd    London   United Kingdom
Sep 10, 2008 With analog (4 inputs, 2 outputs) and digital (24 inputs, 16 outputs) I/O control capabilities, which are expandable by interfacing to iOS remote I/O modules, Model i3 is suited for both process control and factory automation applications. HMI capability integrates 128 x 64 LCD display featuring programmable IP65 function keys or high contrast touch screen 160 x 128 LCD and 4 programmable function keys. Case design allows either panel or DIN rail mounting.

Firstsight Vision Ltd    Surrey GU10 1DW  United Kingdom
Sep 10, 2008 With array of 4,096 x 2 pixels of 10 x 10 µm size, 4K Spyder 3 CL camera facilitates integration into existing systems, and can be used for industrial metrology, print, food, web, and material inspection and container inspection applications. With precise control over key variables such as gain and offset, programmable unit features throughput rates of 80 MHz, flat field correction, correlated double sampling, and dual linescan technology.

Hitachi America Ltd., Industrial Systems Division    Tarrytown, NY 10591
Sep 10, 2008 L300P Series inverter features IPU-PSM option board which adds Pump Sleep Mode functionality to standard built-in PID function. IPU-PSM allows for specification of lower limit on inverter output frequency, monitors system pressure feedback via inverter's PID Deviation parameter, features 2 digital inputs to force inverter to wake and to disable the sleep function, can be configured by means of 4 inverter parameter settings, and requires no additional hardware.

Perle Systems Inc.    Nashville, TN 37210
Sep 10, 2008 Enabling use of IPv6 addressing across all operating systems, TruePort v6.2 can pass serial control signaling information across TCP for secure transmission of information on SSH/SSL sessions. COM port re-director utility allows communication to take place across IP network infrastructure. All COM port directed data sent by application is re-directed by TruePort across IP/Ethernet network to remote Perle Terminal Servers or I/O Device Servers that are connected to customers' target devices.

EBM - Papst, Inc.    Farmington, CT 06034
Sep 10, 2008 Available in 11 sizes with drive outputs between 85 W to 3 kW, EC Centrifugal Blowers are suited for wide range of application, including compact air handling units, air curtains for doors and gates, fan coils, air heaters for factory buildings or as cooling fan for forced cooling of power converters, generators, or telecommunication systems. With integrated motor electronics, EC fans allow up to 3 airflow stages to be programmed in Constant Flow mode.

Rohde & Schwarz GmbH & Co      Germany
Sep 10, 2008 Intended for 50-75 and 220-325 GHz ranges, Models R&S ZVA-Z325 and R&S ZVA-Z75 millimeter-wave converters connect directly to 4-port R&S ZVA series network analyzers, eliminating need for any extra hardware. Converters for V, W, and J bands can be operated as part of base unit, and exceed 90 dB at 75 GHz and 60 dB (typ. 80 dB) at 325 GHz, allowing even high-blocking filters to be analyzed. Adjustable output power facilitates tests on amplifiers in development stage.

Bison Gear & Engineering Corp.    St. Charles, IL 60174
Sep 10, 2008 Designed as Von Weise drop-in replacements, VWDIR83 permanent magnet gearmotors are available in 12 standard models, 6 each for 12 and 90 Vdc inputs. With fixed output speeds ranging from 6-93 rpm and output torques from 50 to 13 in.-lb, units feature 1/30 hp permanent magnet dc motors with replaceable brushes, grease lubrication, and all-position face mounting with 50 lb overhung load rating. Applications include peristaltic pumps, commercial floor care appliances, and door operators.

Tamron USA Inc.    Commack, NY 11725
Sep 10, 2008 Featuring focal length range with 35 mm equivalent of 16 mm wide-angle to 37 mm semi-wide-angle, SP AF10-24mm DI II is designed exclusively for Canon and Nikon digital SLRs with APS-C sized image sensors. It has maximum aperture of F/3.5-4.5, 108° 44 ft to 60° 20 ft (APS-C size equivalent) angle of view, 9.4 in. minimum focus distance, and maximum mag. ratio of 1:5.1. Weighing 14.3 oz, unit is available with filter diameter of 77 mm and overall length of 3.4 in.

2L inc.    Hudson, MA 01749
Sep 10, 2008 Including selection of 5 styles of 2L's precision solid-carbide engraving tools, Engraving Tool Starter Kits help simplify engraving tool selection. Available for diameters of 1/8 and 3/16 in. in lengths of 2 in., each kit has conical ballnose and conical softer material engraving tools for use with aluminum, brass, and plastic. Kits also have engraving tools for steel, SS, and iron, such as tough tip and conical general purpose engraving tools and engraving mill-drill tool.

Halfpricesoft.com    Louisville, KY 40217
Sep 10, 2008 Providing comprehensive checkbook management function, ezCheckPrinting supports multiple accounts which include users and financial institution's name and address. It automatically saves each check and keeps track of check numbers so users do not accidentally apply same check number twice. With complete control over design of their checks, users can customize their checks by adding labels, lines, and business logo image, as well as change font style and size.

Matthews International Corp., Marking Products Div.    Pittsburgh, PA 15206 4407
Sep 10, 2008 With self-cleaning printhead, I-Mark(TM) C84e Continuous Ink-Jet marking system prints up to 4 lines of text from .05-.61 in. high at maximum production line speed of 1,050 fpm. It may be used to print expiration dates, batch codes, logos and bar codes on porous/non-porous materials. Unit has solvent pump and improved start-up/shut-down programs, flush routine that removes ink and flushes solvent to printhead nozzle, and vertical text positioning for fine adjustment of spacing between lines.

Midwest Motion Products    Watertown, MN 55388
Sep 10, 2008 Rated at IP52 for operation in harsh environments, Model MMP-PDSF80-12V GS-180-LS DC Gear Motor has output rated for 70 lb-in. continuous torque at 7.2 rpm and 100 lb-in. peak. Weighing 4.6 lb, gear motor measures 2.8 in. in dia, with 3.15 in. square gearbox, by 6.2 in. long, and has 10 x 27 mm keyed output shaft. Gearmotor requires 3.9 A to generate its full load torque, and comes with 4 M5 threaded screws, equally spaced 66.5 mm apart and accepts any 12 Vdc source.

Berkeley Nucleonics Corp.    San Rafael, CA 94901
Sep 10, 2008 Featuring 8 timing channels with programmable logic, various timing modes, and 10 ns resolution, Model 725 Multi-Trigger Digital Delay Generator coordinates, integrates, and synchronizes cameras, lasers, shutters, choppers, solenoids, igniters, etc. Inputs can be logic signals, switches, transducers, interlocks, computer commands, and gauges. Offering logic, gating, and filtering capabilities, device can be programmed and controlled via Labview or Windows.