Dwyer Instruments, Inc.    Michigan City, IN 46361
Sep 12, 2008 With 3-phase line voltage applied, Model BFA flashes normal LED green light for positive indication of good fuse and integrity of wire connection to each side of fuse. Indicator flashes red fault LED when fuse is unconnected or open, if there is lost connection to either side of fuse, and if mismatched line/load wires are present. When phase loss occurs, both fault and normal LEDs will extinguish. Mounted externally to panel, product can be used for all UL Fuses Class H/J/K/R/RK.

Misumi USA    Schaumburg, IL 60173
Sep 12, 2008 Suited for mechanical fastening, standoff, and general assembly of small devices and finished products, RoHS-compliant Hexagonal Posts are available in 303 SS models ranging from 4-5.5 mm dia with one end tapped and one end threaded or both ends tapped. Units come in lengths from 5-20 mm, configurable in 1 mm increments. Hexagonal Posts are also available with configurable pilot diameter and models with side tapped holes for temporary positioning with both ends threaded.

VersaLogic Corp.    Eugene, OR 97402
Sep 12, 2008 Featuring Intels® Ultra-Low Voltage Celeron® M CPU processor, Model EPM-32v Cheetah PC/104-Plus embedded SBC features rugged, compact design and operates without any fan. Measuring 3.6 x 3.8 in., RoHS-compliant unit includes 2 COM ports, 2 USB 2.0 ports, Ethernet, IDE, LPT, audio, and PS/2 keyboard/mouse support, as well as integrated high-performance video with support for both analog monitors and LVDS flat panels. It also includes customizable and field-upgradeable OEM-enhanced BIOS.

VersaLogic Corp.    Eugene, OR 97402
Sep 12, 2008 Designed for Sidewinder VIA Eden-based SBC, DEV-CD-L5 is Linux quick-start Board Support Package (BSP) that eliminates need for OS configuration and driver installation, allowing embedded developers to create applications quickly. Based on Debian Linux 4.0 (etch/stable) product running Linux kernel 2.6.25-2, bootable CD is configured for easy installation and support of Sidewinder's basic hardware features, including Ethernet, audio, video, USB, and serial communications.

Sherex Fastening Solutions    Tonawanda, NY 14150
Sep 12, 2008 Facilitating attachment of components in off center applications, RIV-FLOAT(TM) can accommodate for tolerance stack up in manufacturing process. Floating nut with .020 in. radial float aligns to drive angle of screw and eliminates cross threading and spin out. Product is suited for post installation in applications where cage nuts, clinch nuts, floating nut plates, or weld nuts are typically used.

API Nanotronics Corp.    Hauppauge, NY 11788
Sep 12, 2008 Nanofabricated directly on thin glass substrates using proprietary processes, polarizing beam splitter/combiners offer extinction ratio of transmission channel greater than 30 dB and reflection channel greater than 25 dB. They can be produced on BK7, SBL7, or similar substrates with thicknesses ranging from 0.2-1.6 mm and sizes from 0.5 x 0.5 to 15 x 15 mm. Featuring operating range of -40 to 80°C, units are suited for telecom and scientific equipment such as Raman amplifiers.

Strongwell    Bristol, VA 24203
Sep 12, 2008 Able to span 36 in. with load of 100 psf and deflection of less than ¼ in., DURAGRID® R-7300 1 in. grating can withstand corrosive environments such as offshore drilling and production platforms, refineries, and chemical plants. Low in electrical and thermal conductivity, light weight grating has bearing bar spacing of 1 3/16 in., and features easy-to-install/remove design along with non-skid surface that ensures worker safety.

Westfalia Technologies, Inc.    York, PA 17402
Sep 12, 2008 Enabling conveyor line to cross AS/RS crane aisle, Drawbridge Conveyor allows products to bypass storage area, even while conveying through it, and go directly to shipping dock. It can be used in any area where transportation traffic is crossing material flow processes, and is compatible with 3-strand chain and chain driven live roller conveyors. Constructed of either mild steel or stainless steel, unit pivots to nearly vertical position in approximately 30 sec.

Cool Polymers    Warwick, RI 02886
Sep 12, 2008 With inherent EMI/RFI shielding characteristics, non-corrosive CoolPoly® thermally conductive plastic provides low CTE and thermally conductive mass to help transfer/dissipate heat close from LEDs with no secondary interfaces at die level. At board level, it provides 3D molded substrates that transfer LED energy similar to ceramic boards and metal backed boards, and can be injection molded to net shape that serves as heat sink and mechanical enclosure at enclosure level.

Gamma Scientific    San Diego, CA 92123 1876
Sep 12, 2008 Designed for cockpit display backlights where lighting changes from tungsten and fluorescent to solid-state LEDs, RS-5NVIS Digital Light Source tests and calibrates ANVIS radiometers and spectroradiometers. It features light level setting to 1 part in 65,535 in absolute, NIST-traceable, ANVIS radiance and luminance units, as well as linearity deviation of less than 0.25% rms. Unit is equipped with manual control and ASCII computer interface control via built-in RS-232 port.

Toshiba America Electronic Components (TAEC)    Irvine, CA 92618-1811
Sep 12, 2008 Measuring 1¾ x 1¾ x 4 1/16 in., Model IK-HR1D features 1/3 in., 2.1 mil megapixel CMOS sensor, delivering clear imagery with no motion artifacts. Including auto-electrical shutter and auto or manual white balance controls, it has one-piece body with DVI-I output (digital and analog RGB). Camera is suited for applications where objects or subjects are in motion, such as specialty broadcast, machine vision, or scientific imaging on the set, or in research lab, studio, or field.

austriamicrosystems AG    Premstatten   Austria
Sep 12, 2008 Providing start/play solution for motion control applications as they require no configuration or calibration by host controller after power up or during operation, Models AS5304 and AS5306 can achieve resolutions of 25 and 15 µm, respectively. Immune to dirt, dust, and grime contaminants to meet reliability challenges in harsh environments, linear Hall sensor ICs are available in 20-lead 5 x 5 mm TSSOP and specified to operate at 5 V over temperature range of -40 to 125°C.

Rudolph Technologies, Inc.    Flanders, NJ 07836
Sep 12, 2008 Suitable for any production environment, E30(TM) and B30(TM) modules are suited for inspection and in-line monitoring of 32 nm manufacturing processes from front end of line (FEOL) through final manufacturing. Edge defects as small as 2 µm on patterned, production wafers can be detected. Part of all-surface Explorer(TM) Inspection Cluster, modules can also be used with NSX(TM) Series inspection systems commonly used in outgoing quality assurance and back-end fab applications.

GAO Tek Inc.    Toronto M1B2K4  Canada
Sep 12, 2008 Supporting various configurable test fixtures, Model GAO2782 can measure frequency ranges of 75 kHz to 30 MHz with resolution of 100 Hz. With 5 mV to 2 V signal level range, it has 0.01 W to 10 MW impedance measurement range, 0.1 pF to 100 µF range for capacitance, and 0.1 nH to 100 mH for inductance. Other measurable parameters include dissipation factor, quality factor, conductance, reactance, susceptance, and phase angle.

Allnetsoft    Samdy, AL 324545
Sep 12, 2008 Designed for synchronization and backup of email, 123 Outlook Express and Windows Mail Backup v2.01 saves email messages, address book, message rules, blocked senders, accounts, and signatures into single backup file and restores saved data back to Outlook Express. It features wizard-style interface and supports shared resource path. Supporting Outlook Express 5.0, 5.01, 5.5, and 6.0, it runs under Windows 95, 98, ME, NT 4.x, 2000, XP, 2003, and Vista.

Makino Inc.    Auburn Hills, MI 48326
Sep 12, 2008 Designed for sinker EDM machines, EDcam v5 acts as communications manager between CAD/CAM systems and machine's NC program. Information is taken directly from part drawing or CAD/CAM system and placed into burn program without any human intervention. Version 5 includes expanded model data, range of electrode material types, and wide selection of cavity types. EPX data import feature provides one-click data entry in lieu of manual step-through of dialog prompts.

Gridconnect    Naperville, IL 60563
Sep 12, 2008 Requiring 3.3 V power source to operate, NET232 jr features RJ45 Ethernet port on one side and short RJ45 serial cable on other side. Serial-to-Ethernet adapter includes built-in webserver as well as notification capability upon triggered events. Device is set by default to obtain IP address automatically if user has DHCP service running on network. If static address is needed, user can access web configuration and make changes required.

Palisade Corp.    Ithaca, NY 14850
Sep 12, 2008 Incorporating quantitative software tools and Monte Carlo simulation software, @RISK, DecisionTools Suite 5.0 enables users to perform sophisticated risk analysis and decision support tasks. Programs perform decision tree, sensitivity analysis, statistics and time-series forecasting, genetic algorithm optimization, and prediction using neural networks. Components run on Microsoft Excel and are designed to work together using common interfaces and spreadsheet functions.

Sony Electronics Inc    San Diego, CA 92127
Sep 12, 2008 VAIO® JS/LV/RT series utilize XBRITE-ECO(TM) or XBRITE-FullHD(TM) LCD technology, depending on model, and respectively feature 20.1, 24, and 25.5 in. LCD panels. Whereas VAIO JS sits directly on desktop and is available with Blu-ray Disc(TM) ROM optical drive, VAIO LV/RT come with Blu-ray optical drive as well as integrated power supply to allow for wall mounting. All models offer array of other technologies and I/O options.

Surfware, Inc.    Westlake Village, CA 91362
Sep 12, 2008 In addition to Engagement Milling technology, SURFCAM® Velocity 4 incorporates provision of recommended Truemill(TM) speeds/feeds, feedrate optimization, and Swift-carb custom designed TrueMill Series tools. It delivers 3-axis finishing with high-speed machining strategies featuring multiple processor support as well as automatic arc filtering. Other capabilities include 4- and 5-axis machining with precise control for safe tool motion in challenging applications.