DIRAK    Chantilly, VA 20151-1220
Sep 15, 2008 Model 3-145 heavy-duty latch accommodates 2 separate locks - key and/or pad lock eyelet - to optimize protection against unauthorized access. Along with support for various locking systems, it incorporates anti-vandalism device to deter forceful removal of cylinder. Minimal gap between handle and housing makes it difficult for vandals to pry open latch, and safety feature ensures handle cannot be accidentally closed. Product supports use as single or multiple latching point.

Baldor Electric Company    Fort Smith, AR 72901
Sep 15, 2008 Baldor Reliance API 547 large AC industrial motor meets American Petroleum Institute's Specification 547 requirements and is designed for safe and reliable operation in severe duty applications. Suited for pump compressor and fan applications, it is available from 250-3,000 hp in 2-, 4-, 6-, and 8-pole speed configurations.

Wilkerson Instrument Co., Inc.    Lakeland, FL 33811
Sep 15, 2008 Acting as standard DAQ device or repeater, DR9051R wireless transmitter provides analog and contact closure data to DR9050 controller. Latter acts as portal between Modbus Master Controller and from 1-247 remote transmitters. It outputs standard Modbus RTU data via RS485/422 data port and can be wired in parallel with other Modbus products. Combined DR9050/DR9051R system offers choice of 3 radio frequencies, 2 in 915 MHz ISM band and one in 2.4 GHz band, that use SSFH technology.

Automation Devices, Inc.    Fairview, PA 16415
Sep 15, 2008 Fork Rhino converts fork lift into equipment handler capable of moving variety of hitch equipment, including ball hitches, goose necks, and pintles. Able to fit forks up to 6 in. wide, solution evenly spreads load over both forks to eliminate fork sag. Product is offered in 4 models - Shackled Fork Rhino, Shackled Fork Rhino Receiver, Pinned Fork Rhino, and Pinned Fork Rhino Receiver - and design does not affect safe operation or capacity of fork truck.

VEE GEE Scientific, Inc.    Kirkland, WA 98034
Sep 15, 2008 Installed on microscopes with existing camera port or standard eyepiece tube, VanGuard H2 uses ½ in. CMOS image sensor to deliver images onto computer monitor via USB 2.0 cable. Camera offers 1,600 x 1,200 resolution for documentation/archival of clinical, life science, and industrial laboratory analysis. TWAIN-compatible unit has max video capture rate of 40 fps and does not require separate power supply. Imaging software, included, gives users control of advanced camera settings.

International Rectifier Corp.    El Segundo, CA 90245
Sep 15, 2008 Offered in 8-lead SOIC package, high-speed power MOSFET and IGBT drivers AUIRS2123S/AUIRS2124S are qualified to AEC-Q100 standards and offer 10-20 V gate drive supply. High-pulse current buffer stage is designed for minimum driver cross-conduction, while floating channel can drive N-channel power MOSFETs or IGBTs in high-side configuration operating up to 600 V. AUIRS2123S output signals are in phase with input signal, while AUIRS2124S output signals are out of phase with input signal.

Kochek    Putnam, CT 06260
Sep 15, 2008 Able to be personalized with individual's or fire company's name, hydrant hammer features rubber head that is easy on fittings and suited for loosening/tightening long handled swivels. Weight of 2 lb and compact dimensions (9 ½ in. closed length) facilitates carrying, while comfortable grips facilitate use. Solution fits ¾-6 in. rocker or pin lug fittings and is suited for hydrant bag or personal use.

Bell-Everman, Inc    Goleta, CA 93117
Sep 15, 2008 Featuring anodized aluminum construction with stainless steel hardware and polyurethane/steel reinforced belt, ServoBelt reaches accelerations in excess of 4 g at speeds to 5 m/sec. Single motor supplies peak forces up to 880 N and continuous forces to 300 N. Available with 16,000 and 20,000 CPR rotary encoders, drive features unidirectional repeatability to ±10 µm and bi-directional repeatability of ±40 µm. All bearings are lubed-for-life with no maintenance required.

Rino Industries Ltd.    Chesterfield S41 9RN  United Kingdom
Sep 15, 2008 Backlash-free metal bellows couplings have pluggable, removable clamping hub. Tightening torque values increase with increasing OD of coupling hubs, which range from 27-84 mm, and bore sizes range from 3-40 mm. Stainless steel versions are available upon request, but standard materials are aluminum for sizes 2-60 and steel for sizes 80-150. Products are suited for applications requiring backlash-free qualities.

Rino Industries Ltd.    Chesterfield S41 9RN  United Kingdom
Sep 15, 2008 Smart Lock Set facilitates installation and removal of hollow shaft drives, even after extended periods of service time. It is comprised of indestructible shrink disc, cylindrical adapter and support bushing, hollow shaft, and cover. Adapter bushing enables use of universally available bore diameters and hollow shaft dimensions. This enables gearbox hollow shaft to cover wider range of solid shaft diameters.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Sep 15, 2008 Offered in 16-pin DIP package, VO3526 outputs currents up to 1 A to drive resistive and inductive loads. It consists of GaAs IR LED optically coupled to monolithic photosensitive non-zero-crossing TRIAC detector chip. Rated at 600 V blocking voltage, power phototriac can provide isolation between dc and ac voltages on 120 and 240 Vac lines. Along with input-to-output isolation voltage of 5,300 V, product offers 10 mA input trigger current that facilitates interface with digital logic.

Thermo Fisher Scientific    Waltham, MA 02454
Sep 15, 2008 Optimized for accelerated data acquisition, Nicolet(TM) iN10(TM) MX enables analysts to determine identity and distribution of chemical species within complex structures and random mixtures on microscopic scale. It leverages OMNIC(TM) Picta(TM) software and guides operator through entire analytical process. Able to be validated in reflection, transmission, and ATR sampling modes, microscope supports up to 3 detectors and integrates machine vision and spectral identification technology.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Sep 15, 2008 Available as plug-in module for Xilinx ML571 serial digital video development board, ML571-1982CLK video clock reference design module enables SMPTE-compliant jitter performance for broadcast video applications. It delivers low clock output jitter of 40 psed p-p at 148.5 MHz to drive Virtex-5 LXT FPGA's integrated SerDes without need for additional clock cleaning circuitry. Unit features LMH1982 multi-rate video clock generator and LMH1981 sync separator devices.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Sep 15, 2008 SDALTEVK and SDXILEVK triple-rate SDI and video clocking daughter card development kits include FPGA IP for audio embedding and test pattern generation and framing for SD, HD, and 3 Gbps type-A SDI formats. They support 270 Mbps, 1.485 and 2.97 Gbps data rates. SDALTEVK plugs directly into Altera's Cyclone III development board via high-speed mezzanine connector, while SDXILEVK plugs into Xilinx Spartan-3A development board via Avnet's EXP expansion module.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Sep 15, 2008 Model LMH4345 triple-rate (3G/HD/SD) serial digital interface (SDI), dual-channel serializer and deserializer (SerDes) transceiver delivers 30 picosec output alignment jitter and 0.6 units interval minimum input jitter tolerance. It supports 270 Mbps and 1.485 and 2.97 Gbps data rates, enabling transmission of digital video broadcasting-asynchronous serial interface (DVB-ASI), standard-definition (SMPTE 259M-C), high-definition (SMPTE 292M), and 3G-SDI standard (SMPTE 424M).

Watlow    St. Louis, MO 63146
Sep 15, 2008 Suited for TCO, PVD, and lamination applications, Interference Fit Construction Heaters (IFC) can be produced in single sheets or array of small heaters to achieve dimensions of larger than 47.24 x 55.11 in. with process heater temperatures greater 1,022ºF. They can also be designed with aluminum and SS heater plates for process temperatures up to 750° and 1,200ºF, respectively. IFCs can be used in atmospheric or vacuum environments, preventing outgassing and contamination.

Linear Technology Corp.    Milpitas, CA 95035
Sep 15, 2008 LT3011 micropower regulator offers up to 50 mA of output current with 300 mV of LDO voltage at full load. It features 1.24-60 V adjustable output voltage range, 46 µA (operating) and 1 µA (in shutdown) quiescent currents, PowerGood flag with programmable delay, and output noise minimized at 100 µVrms over 10 Hz to 100 kHz bandwidth. Suited for noise-sensitive applications, unit has operating temperature range of -40 to +125°C, and is stable with 1 µF ceramic capacitors.

Murrplastik    Doylestown, PA 18901
Sep 15, 2008 Designed to snap into panels 1.5-2 mm thick and rated for use between -30 to +90°C, Round KDP/R Cable Entry Plate comes pre-punched with 1 hole for each cable or pneumatic hose to be inserted. Once cable is fed through, slight tug in opposite direction sets strain relief for cable. If cable is removed at later time, hole can be completely sealed off using strain relief indicator. Unit meets both RoHS standards and UL class VO for fire protection.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Sep 15, 2008 Including Series S52FCY with 21 inch and S52FCYM with 27 metric sizes, Shaft Reducers and Extenders incorporate Fairloc® fastening system, which consists of 2 slots that are machined into hub, one radially the other angularly, to create transverse wedge that remains attached to solid portion of hub on one side. Adapter's female end fits 14 shaft diameters ranging from .1200-.4998 in. (3-12 mm), while male side consists of shafts ranging in diameter from .1247-.4997 in. (3-12 mm).

Marinco Specialty Wiring Devices    Napa, CA 94558
Sep 15, 2008 Available in 15 and 20 A straight-blade configurations, Clamp-Lock(TM) design utilizes color-coded cam levers to open and snap-close chambers that accept conductors, simply using finger pressure. Specification- and hospital-grade devices require no tools for insertion and no re-torquing is necessary due to constant clamping force. Device includes 2 fast-travel assembly screws; long, deep funnels to aid in precise insertion of wires; and self-centering external cord grip.