Atlona Technologies
San Jose, CA 95131
Mar 04, 2009 Designed to extend Component and digital audio over single CAT 5 cable without signal degradation, Models AT-COMP300SL and AT-COMP300RL feature Component loop-out for local monitoring. Units have transmission range of 1,000 ft and support resolution up to 1,080p. In addition to adding outputs for multiple displays, cascadable extenders can also combine to increase outputs for future expansion. Applications include digital signage, PA systems, boardrooms, and trade shows.

International Components Corp. (ICC)
Hauppauge, NY 11788
Mar 04, 2009 Delivering converter efficiency of up to 94% and power density of 5.5 W/in.³, FWA150 series 150 W ac/dc external power adapter makes full-rated continuous and peak power available at all output voltages as well as over entire input voltage and frequency ranges. Models have universal 85-264 Vac input with active PFC and are available with single outputs of 12, 15, 18, or 24 Vdc. Measuring 7.56 x 2.45 x 1.52 in., convection-cooled series incorporates various protection technologies.

RF Micro Devices, Inc.
Greensboro, NC 27409-9421
Mar 04, 2009 Housed in 3.0 x 3.0 x 0.5 mm package, Models RF5325, RF5345, and RF5725 each contain 2.4 GHz power amplifier, output power coupler, transmit low pass filtering, and SP3T switch capable of switching between Wi-Fi Rx, Wi-Fi Tx, and Bluetooth® Rx/Tx operations. Models RF5345 and RF5725 also integrate low noise amplifier for RF architectures requiring additional Rx gain. Featuring 3.3% error vector magnitude, modules are suited for handsets, PNDs, digital cameras, and MP3 players.

RF Micro Devices, Inc.
Greensboro, NC 27409-9421
Mar 04, 2009 Along with single-pole nine throw pHEMT switch, RF1194 integrates quad-band GSM/GPRS/EDGE transmit low-pass filtering and 4 GSM/GPRS/EDGE receive surface acoustic wave filters. Model RF1195 integrates single-pole ten throw pHEMT switch and builds on RF1194 architecture by providing additional high-linearity port for 4 total symmetrical WCDMA/HSPA+ Tx/Rx ports. Both cellular switch filter modules come in pin-to-pin compatible, 4.5 x 4.5 x 1.2 mm packages.

Pres-On Products, Inc.
Addison, IL 60101
Mar 04, 2009 Cap liner types include foam polyethylene, S105 and S70 foil seal, pressure seal, pulp and foil seal, as well as lift and peel with built-in tabs. While standard cap sizes range from 20-120 mm, additional custom diameters, shapes, and substrates are available. Design is compatible with existing packaging machinery, including induction sealers, and sealing characteristics provide barrier to air and moisture for range of products.

Accuposture Systems, Ltd.
Bloomfield, CT 06002
Mar 04, 2009 Featuring 100% recycled aluminum construction, 1 in. on-center Adjus® SlatWall stands 6 in. tall and slides between workstation UpRights. Unit stacks to create seamless wall or can be used singly to serve as bin rail. Made from 100% recycled aluminum and 25% post consumer steel, Adjus® Upright System attaches to any existing work surface from .75-1.75 in. thick, without drilling. Both accommodate standard pegboard and slat wall hooks as well as hanging storage bins.

Unitek Miyachi Corporation
Monrovia, CA 91017 7133
Mar 04, 2009 In addition to marking and engraving on both metals and plastics, Model LMF2000 can produce cuts in copper, steel, or aluminum up to 0.02 in. thick, enabling prototyping of lead frames, sheet parts, or steel tubes. Method uses no direct assist gas, and precise control over laser parameters enables cut to be tuned for quality with underside burr of less than 0.0005 in.

Waterous Co.
South St. Paul, MN 55075
Mar 04, 2009 Designed for industrial cleaning of furnace tubing and coiling used in refineries, CMU Pump operates up to 2,250 gpm, propelling oblong metallic cleaning device with high-pressure waterpower through coil furnace tubing at rates of 3,500-4,500 rpm. Driven by direct application engine, CMU pigging application is completely self-contained and mounted on semi-trailer. It includes hose and tank collection unit to house contaminated water during cleaning process.

Labconco Corp.
Kansas City, MO 64132 2696
Mar 04, 2009 Along with refrigeration capability for protecting heat-sensitive samples by cooling them down to 25°F during processing, Proteomic CentriVap® Benchtop Concentrator System incorporates DNA Rotor that handles up to 60, 1.5 ml and 72, 0.5 ml microcentrifuge tubes. CentriVap Cold Trap, also included, reaches -58°F for solvent recovery and traps moisture, vapors, and corrosive fumes as they evaporate. MPU-controlled, 300 W heater accelerates evaporation with constant heat up to +100°C.

Protonex Technology Corp.
Southborough, MA 01772-1034
Mar 04, 2009 Designed to match virtually any load with any available power source, soldier-worn Models SPM-611 and SPM-612 minimize number of batteries and different types of power sources soldiers must carry. Units provide soldier battery monitoring and discharge prioritization, management and optimization of charging, power delivery to soldier systems, as well as power harvesting and scavenging from alternative and found energy sources.

Schleuniger, Inc.
Manchester, NH 03103
Mar 04, 2009 Designed for CrimpCenter machines, CoilingUnit 60 automatically coils long wires into wire ring, and depending on wire size, can handle wire lengths up to 100 ft. Optional CoilTaper 60 can be added to secure coils for handling. Taped coils can be collected with optional CoilStacker 60, which is equipped with 2 horizontally rotatable collection arms. It is possible to coil single-wire applications with or without seals or terminals on either end.

Walchem Corp.
Holliston, MA 01746 1460
Mar 04, 2009 Suited for use in harsh and aggressive solutions, WEC/WDEC410 Series Electrodeless Conductivity Controllers utilize non-contacting, toroidal conductivity measurement. Pre-wired NEMA 4X wall-mount package is available with one or 2 sensor inputs and integrated data logging. Data extraction is possible via USB stick, and 4 mechanical control relays offer on/off or time proportional control options. Fifth relay is provided for localized visual or audible alarm.

BASF Corp.
Wyandotte, MI 48192
Mar 04, 2009 Suited for light swipe (RheoFIT(TM) 900) and moderate to heavy swipe (RheoFIT 900 S), plasticizing admixtures enhance production efficiency and aesthetic appeal of manufactured concrete products. They exceed traditional plasticizing chemistries by dispersing cement, pozzolans, and integral pigments. Also, both versions reduce compaction resistance while optimizing compressive and flexural strengths. Surface finish characteristics are improved as well, via reduced breakage and culls.

Rixan Associates, Inc.
Dayton, OH 45459
Mar 04, 2009 Utilizing vibratory bowl feeder, backlit target stage, and machine vision technology, RFS-1000 vibrating parts feeder system can feed unlimited numbers of non-uniform parts within certain size range. System also allows for running dissimilar parts back to back without having to clean feeder.

GAO Tek Inc.
Toronto M1B2K4  Canada
Mar 04, 2009 Designed for contactless financial transactions and encrypted authentication across range of vertical markets, embedded RFID M2 module GAO 713008 can be used for varied applications from anti-counterfeiting to patient safety that share common requirements for tag support, protocol, performance, and security. It provides HF tag/protocol support, tag compatibility with Tagnostic® and TagIQ(TM), 7 General Purpose I/O, and software adjustable UART (TTL), SPI, and USB host interfaces.

Pulse Engineering, Inc.
San Diego, CA 92128
Mar 04, 2009 Designed for use in high-end Ethernet networking equipment, SFP032-L SFP cage can handle data transmission speeds up to 5 Gb, and withstand temperatures of -40 to +85°C. Measuring 25.5 x 63.25 x 114.25 mm, SFP Transceiver MultiSource Agreement (MSA) standard product has two-piece structure to prevent deforming during press fitting. Compatible with a wide variety of commercial transceivers, RoHS compliant unit has holes to allow air circulation and heat transfer.

J. J. Keller & Associates, Inc.
Neenah, WI 54957
Mar 04, 2009 With web-based Maintenance Manager® Online, motor carriers can track and manage daily preventive maintenance tasks. Service provides central place to schedule and record common maintenance, report on repair orders, schedule mechanics, and track inventory of vehicle parts. Users can access information through their Internet account, allowing companies with multiple locations or terminals to have consistent and complete PM data immediately available.

B & R Industrial Automation Corp.
Roswell, GA 30076
Mar 04, 2009 Targeted at industrial Ethernet use, X20 hub system has 100Base-FX underlying standard, and is based on duplex LC technology. There is no loss of performance (wire speed), as internal downgrading technology is not used. Unit also comes with 2 RJ45 connections.

B & R Industrial Automation Corp.
Roswell, GA 30076
Mar 04, 2009 With optimized torque ripple and stall torque between 0.8-2.5 Nm, 8JS three-phase synchronous motors have sinusoidal commutation with EnDat encoder or resolver as feedback unit. They directly divert lost power generated in stator to flange via housing, allowing regeneration of energy.

Enercon Industries Corp.
Menomonee Falls, WI 53052
Mar 03, 2009 Compak(TM) 9000 integrates touchscreen PLC-based interface that helps save converters and extruders time and expense regarding installation while also providing advanced corona treating process control. Standard pre-programmed options include watt density control, proportional speed control, station diagnostics, and fault logging. Customer-specified options may also be accommodated. Also, support for various communication protocols facilitates connections to remote control network.