Agilent Technologies, Inc.    Santa Clara, CA 95051
Oct 28, 2011 Supported on Infiniium 90000 and 90000 X-Series Oscilloscopes, Agilent N8815A Ethernet 10Gbase-KR Software enables 64b/66b trigging and protocol decoding in real-time. Application leverages Infiniium's multiple serial decoding and searching, allowing designers to look at 4 lanes at once. N8815A software also identifies PRBS signals and their lengths, and allows for forward error correction.

Bourns, Inc.    Riverside, CA 92507 2129
Oct 28, 2011 Utilizing magnetic Hall-effect technology, Bourns® Model AMS22 is suited for value and actuator position feedback, camera and antenna location identification, as well as precision positioning requirements in diverse applications and environments. Single analog output, rated from 0.1-4.9 V, offers effective electrical output of 340° and is programmable up to 360°. Output also features 12-bit resolution and comes with independent linearity of 0.5% or 0.3%.

Mettler-Toledo International Inc.    Greifensee 8606  Switzerland
Oct 28, 2011 Sensitive to oxygen levels down to 2 ppb, InPro 6970i uses fluorescence quenching technology and combines high measurement performance with Intelligent Sensor Management (ISM) functionality. Sole consumable, OptoCap, can be replaced within minutes, and sensor is ready to use once it is calibrated. Using diagnostic tools, quality of sensing element and all sensor components are permanently monitored.

Delcam Plc    Birmingham Hampshir B10 0HJ  United Kingdom
Oct 27, 2011 In addition to target-part comparison and multiple-instance programming, Delcam for SolidWorks 2012 includes programming of 2D wire EDM as well as options for programming of turning, mill-turn, drilling, and 2- through 5-axis milling. Fully automated de-burring and chamfering is also included, as is ability to incorporate chamfers. Stock models let user visualize material remaining after each operation, and tooling database allows optimum operating conditions to be associated with each tool.

J D Neuhaus L.P    Sparks, MD 21152
Oct 27, 2011 Operating from 6 bar air pressure, Model EH 125 is equipped with 10 kW and 2.8 kW rated motors for lifting and traverse functions, respectively. In standard format, hoist is supplied with 6 double-chain mechanism providing 3 m lift at speeds of 0.30 m/min with full load, and 0.38 m/min on lowering. System offers horizontal travel speeds of 6 m/min with max load and 8 m/min when unloaded. Operating from -20 to +70°C, hoist has Ex rating for use in hazardous areas.

Tyrolit    Westborough, MA 01581
Oct 27, 2011 Featuring reinforced carbon fiber core that can be reused several times with addition of segments, GENIS CF Wheels are suitable for external cylindrical grinding of automotive components. Units feature thermally stable CBN grains within wear-resistant, vitrified bond, and porous abrasive layer that minimizes friction and heat generation in cutting zone. Wheels up to 700 mm dia are available for grinding truck crankshafts, while wheels up to 250 mm wide can be supplied for camshaft production.

Modern Linear, Inc.    Corte Madera, CA 94976
Oct 27, 2011 Track Clamp provides defined track spacing to assure track parallelism. Set screws lock track in place, eliminating need for mounting holes, and design acts as stand-off to prevent build up as well as facilitate cleaning in contaminated or wash-down environments.

IBASE Technology Inc.    Taipei   Taiwan
Oct 27, 2011 Measuring 102 x 147 mm, IB905 supports 2nd generation Intel® Core(TM) i7/i5/i3/Celeron® QC/DC CPUs up to 2.6 GHz, with integrated graphics and memory controller, and is based on Intel® QM67 Express chipset. SODIMM socket has 4 GB max capacity (1,067/1,333 MHz), and graphics interfaces include CRT, DVI, and 24-bit dual channel LVDS. For connectivity, SBC offers 2 Gigabit LAN, 6 USB 2.0, 2 USB 3.0, 2 serial, and 2 SATA III interfaces as well as Mini PCI-E slot.

AMETEK TIP (Technical & Industrial Products)    Kent, OH 44240
Oct 27, 2011 Depending on model, Nautilair(TM) 12.3 in. variable speed blowers achieve max sealed pressure capabilities up to 20 in. of H2O and max open flows to 1,000 cfm. Pre-mix blowers, when used with gas valve and venturi, deliver measured air/fuel mixture for optimized combustion and reduced nitrous oxide and carbon monoxide emissions. Versions can accept line voltage input of 120 or 240 Vac and are designed to operate in excess of 20,000 hr with minimal maintenance.

Beckman Coulter, Inc.    Fullerton, CA 92834-3100
Oct 27, 2011 Custom Design Services provides single and multicolor custom-tailored conjugate configurations as well as purified antibodies. Scientists work with human and non-human antibodies and use fluorochromes to create tests for range of targets. Specifically, 2- to 10-color panels can be composed to meet specific experimental requirements, and tandem dye technology optimizes coupling efficiency and SNR. Antibodies may be lyophilized or supplied in specified buffer solution.

Crystek Corp.    Fort Myers, FL 33907
Oct 27, 2011 Operating from 1,200-2,100 MHz with control voltage range of 0.5-25 V, CVCO55CW-1200-2100 features typ phase noise of -95 dBc/Hz @ 10 kHz offset and has typ output power of +6 dBm. U.S. manufactured product comes in 0.5 x 0.5 in. SMD package, accepts 12 V input, and has max current consumption rating of 35 mA. Pulling and Pushing are minimized to 25.0 MHz and 10.0 MHz/V, respectively, and second harmonic suppression is -8 dBc typ.

Larson Electronics, LLC    Kemp, TX 75143
Oct 27, 2011 Measuring 4 ft long with solid state LED light tubes and no ballast, Model GVP-48-2L-LED draws less than 0.2 A of power. Light fixture operates from 120-277 Vac and includes 2 LED lamps that provide 160° beam angle. Shatterproof polycarbonate lens enables glare-free output, while integral aluminum heat sink tube backings provide cool operation. Featuring 50,000 hour service life, Model GVP-48-2L-LED is suited for both indoor and outdoor applications.

Diagraph - An ITW Company    St. Charles, MO 63304
Oct 27, 2011 Using digital controls and no compressed air, E-Series Tamp Blow All-Electric Labeler provides accurate label placement. Tamp pad is extended 1/8¼ in. from product to be labeled, and then blows label onto it using same brushless fan motor that develops vacuum to hold label. Double action air flow valve changes vacuum draw into air blast coming out of same porting holes. Suitable for labels ranging from 1¼ x 1¼ in. up to 4 x 6 in., system offers application rate of 55 ppm.

R & M Energy Systems    Houston, TX 77060
Oct 27, 2011 Era® Blazer(TM) Rod Guides can increase production and decrease workover costs by extending rod and tubing service life in standard and high-temperature applications such as progressing cavity downhole pumping. Manufactured from engineered plastics enhanced with performance additives tailored to withstand high-temperature well conditions, products feature spin-thru design that reduces torque generated by mechanical and hydraulic friction of rotating rod string.

Baumer Ltd.    Southington, CT 06489 1534
Oct 27, 2011 With 14-bit single-turn and 12-bit multi-turn resolutions, GE404 Series delivers precise positioning data at velocities up to 10,000 rpm. Leakproof, IP67-compliant encoders feature Viton seals and class 1.4404 or 1.4435 V4A stainless steel housings, enabling them to withstand harsh washdowns and aggressive cleaning processes. ShaftLock bearing minimizes machine downtime by enduring vibration and high shaft loads that occur during processing and cleaning.

Corelis, Inc.    Cerritos, CA 90703
Oct 27, 2011 Supporting Turion(TM) II Neo, Athlon(TM) II Neo, Opteron(TM) 4100, and Opteron(TM) Quad-Core processors, ScanExpress JET provides automated at-speed, non-intrusive functional testing for SDRAM memory, SPI Flash, I2C, and UART. System features HyperTransport(TM) link validation, peripheral detection of PCI and PCIe buses, and fully automatic test development for all supported peripherals. No boot code is required for test execution.

TEMIS    Philadelphia, PA 19102
Oct 27, 2011 Suited for governments and digital publishers, Luxid® 6 automatically extracts relevant information, identifies relationships in unstructured data, and facilitates links between similar documents. Taxonomy Skill Cartridges® accelerate use of existing taxonomy to enrich document assets, while Rule-Based Skill Cartridges® capture domain experts' reasoning and apply it to content. Machine-learning Skill Cartridges® replicate experts' tagging strategies after preliminary training on annotated corpus.

Glowpoint, Inc.    Hillside, NJ 07205
Oct 27, 2011 Virtual Video Room v2.0 features Web-based moderator portal that lets meeting host optimize video experience, including screen layout adjustment for multipoint meetings in continuous or voice switched mode, for all participants. Portal also lets host add/drop participants during session, mute video/audio for individuals, and view connection quality of each participant. Support is also provided for Microsoft Lync and OCS users as well as SIP-based endpoints utilizing BFCP.

K-Tool International    Wixom, MI 48393
Oct 27, 2011 Along with Quick Lift technology, KTI low-profile service jack features heavy-duty steel frame, rear swivel casters, and 2-piece, 49 in. handle with rubber grips. Product has 4 ton capacity and 3 15/16 to 20 in. lifting range. Along with 6,500 lb capacity, KTI hand pallet jack has 27 in. fork width for load stability. Other features include 48 in. forks with lowered height of 3 in. and max lifting height of 7 ½ in., welded steel construction with powder-coated finish, and 210° turning radius.

Laserlinc    Fairborn, OH 45324
Oct 27, 2011 Designed specifically for integration with laser and ultrasonic measurement systems, µLinc(TM) has connectors for all system I/O located on back of unit, for scanning laser micrometers, encoder input, and UltraGauge+(TM) wall thickness system. Processor also includes detachable screw terminals for digital inputs, relay outputs, and analog I/O. Unit runs Total Vu(TM) measurement/data processing software, which provides in-process tolerance checking, trending, SPC, feedback control, and data logging.