Doncasters, Inc.    Farmington, CT 06032
Oct 24, 2008 Designed for shipbuilding industry, portable Model Nelweld® N800i(TM) supports drawn arc, gas arc, as well as short cycle welding. Suited for welding ½ in. fasteners, unit can be used for insulation pin applications, cable hangers, and threaded fasteners.

Pasternack Limited    Irvine, CA 92614
Oct 24, 2008 Performing in temperatures from -55 to +165ºC, PE315 and PE317 Series 26.5 GHz test cables have solid center conductor that ensures low insertion loss while providing phase and amplitude stability. Passivated stainless steel connectors ensure secure matings; PE315 cables are terminated with male 3.5 mm connectors, while PE317 cables are terminated with male and female 3.5 mm connector. Cables come in standard lengths of 24/36/72 in.

EMCO Flow Systems    Longmont, CO 80501
Oct 24, 2008 Suited for 2-100 in. pipe sizes, Sono-Trak® Doppler uses 2 transducers mounted side by side operating as ultrasonic signal transmitters and receivers. Flow meter is obstruction-less and provides accuracy ratings of ± 2.0% FS from 1-30 ft/sec and repeatability of ±0.01%. It is rated for temperatures from 40-300°F and features programmable display that reads pulse, voltage, and analog rates and provides built-in high/low limit alarms, 4-20 mA signals, and echo light.

Eaton Hydraulics    Eden Prairie, MN 55344
Oct 23, 2008 Available in sizes 6-12, GH100 ESP(TM) Hose consists of hydrogenated nitrile rubber tube, wrapped with aramid/poly braid reinforcement with polyester abrasion-resistant cover. Product is qualified for underhood use with B2-B20 up to 150°C and B100 up to 125°C, as well as for transmission oil cooler applications using synthetic lubricants at peak temperatures up to 175°C. Applications include diesel engines, trucks, buses, agricultural vehicles, and off-highway applications.

Eaton Hydraulics    Eden Prairie, MN 55344
Oct 23, 2008 Designed to handle virtually all Weatherhead® hose styles through -20 SAE100R12 hose and fittings, Weatherhead® ED1280 features dial indicator to control crimp diameter, providing precision while maintaining ability to adjust finished crimp diameter to meet application requirements. Unit uses 1-piece collets and is powered by hand pump, turbo air/hydraulic power unit, or 12 Vdc power unit. Upright model can be mounted to service vehicle or shop bench.

Silent Knight    Maple Grove, MN 55369 4927
Oct 23, 2008 Equipped with individual point identification, drift compensation, and maintenance alert, IFP-2000 Scalable Intelligent Analog-Addressable FACP locates problem areas and minimizes false alarms. System has interconnection capability for up to 8 panels with 9.0 A of output power available through 8 Flexput circuits. Suited for medium to large size customers, IFP-2000 can be installed using existing fire system wiring and additional SLC loops using 5815XL SLC expander for up to 636 points/panel.

Steinmeyer Inc.    Bedford, MA 01730
Oct 23, 2008 Driven by stepper motor, Model DT 180-SM features positional accuracy of 0.1°, repeatability of less than 0.05°, and surface run out of less than 0.02 mm. Unit achieves speeds up to 90°/sec and accelerations greater than 500°/sec². Measuring 63 mm high and 310 mm long, rotary stage offers 100 mm center aperture and is manufactured from low-distortion aluminum alloy. Device targets semiconductor, fiber optic, medical, optical, laser, and miniature robotics industries.

Parker Hannifin Corp., Cylinder Division    Des Plaines, IL 60016 3198
Oct 23, 2008 Available in PNP and NPN outputs, position sensing limit switch can detect polarity change in standard steel tube as magnetic piston moves through hydraulic cylinder. Solid-state, tie-rod-mounted product is designed for use on 1.50-4.00 in. bore Series 2H, 3L, and 2A cylinders and provides multiple position sensing because it can be located anywhere along cylinder to signal end-of-stroke or mid-stroke locations. Non-intrusive design maintains pressure envelope integrity.

Rino Industries Ltd.    Chesterfield S41 9RN  United Kingdom
Oct 23, 2008 Available in mild steel and high carbon, as well as 304 and 316 SS, Staytite Nuts are assembled with stainless steel spring insert, ensuring their abilities do not suffer from corrosion. As nut is installed on screw thread, insert engages with base of screw thread and flexes upward. During use, Staytite nuts resist vibration and loosening because inserts flex downwards and are pulled into close contact with screw threads by upwards anti-clockwise rotation of nut body.

Harland America Inc.    Delran, NJ 08075
Oct 23, 2008 Custom-built to specific requirements, Titan applies pressure-sensitive front and back labels to glass or plastic bottles/containers. System consists of main unit constructed of heavy-duty stainless steel, single- or twin in-feed screw unit, and up to 4 labeling stations. Designed to apply labels ranging from 0.8-13.2 in. long and from 0.6-4 in. wide, system includes integrated inspection/vision feature, which detects label presence and verifies label alignment and positioning.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Oct 23, 2008 Compliant with LIN Bus 2.0/2.1 and SAE J2602 standards as well as LIN 1.X standards, MCP2021/MCP2022 are OEM-approved, and AEC-Q100-certified to meet global automotive manufacturer requirements. Built-in voltage regulators reduce required number of external components, ESD performance enables reliable communication in harsh environments, and emissions characteristics eliminate need for external shielding. Operational and standby modes respectively consume 115 and 16 µA.

OYSTAR USA    Fairfield, NJ 07004
Oct 23, 2008 Available with 4, 8D, or 10B stations, OYSTAR Manesty XSpress features hybrid turret with 4 B and 4 D punches, automated weight adjustment using die fill regulation, and controlled automated upper and lower punch lubrication system. Utilizing open feeder or force feeder, cGMP-compliant press can process as little as 50 g of powder for small quantity trials. Instrumentation and data acquisition software is provided to analyze compression forces, ejection force, and punch displacement.

Philips Lighting Co.    Lewiston, ME 04240
Oct 23, 2008 ActiLume(TM) Lighting Control System is comprised of 7/8 in. high controller, 5/8 in. high multi-sensor, remote control, and DALI-compatible ballasts. Touch of service button on sensor unit commissions occupancy sensing and daylight harvesting, and device can drive up to 9 ballasts/system while controlling up to 2 zones independently. It is suited for use in small open offices, meeting rooms, and private office configurations.

Bosch Rexroth Corp., Pneumatics Div.    Lexington, KY 40511
Oct 23, 2008 Supplied in IP65 polymer housing, PE5 offers numerous pneumatic connection options and is available with 2 digital switch outputs or one digital switch output and one analog output. Versions with PNP or NPN outputs are available, and analog output signal can be switched from 0-10 V and 4-20 mA. In addition to LCD with 0.43 in. tall characters, switch features 3 ergonomically arranged buttons to facilitate installation and operation. Pressure range options vary from -14.5 to 145 psi.

Pentair Industrial    Sheboygan, WI 53082
Oct 23, 2008 Designed to minimize equipment wear, Driflex(TM) System provides complete removal of free, emulsified, and dissolved water from variety of industrial and mobile lubrication and hydraulic systems. Unlike vacuum purifiers, system has no moving parts or flow/level controls to adjust. Compact design makes it suited for periodic use on reservoirs throughout facility, but Driflex may also be dedicated to particular reservoir to provide continuous conditioning.

Hydro Leduc    Houston, TX 77077
Oct 23, 2008 Designed for optimum integration into receiving organ, MSI series are generally used with planetary gearbox on construction equipment, agricultural machinery, or mining and crushing equipment. Plug-in type cartridge motors leverage bent axis technology, with angle of 40°; offer over 10 kW/kg power; and exhibit efficiencies over 90%. Comprised of 32-108 cc models, series handles operation at pressures up to 400 bar continuous and 450 bar peak.

Aldon Co., Inc.    Waukegan, IL 60087 3218
Oct 23, 2008 Fabricated from steel for strength, permanent and portable derails are designed to meet OSHA and FRA regulations for spur track protection. Permanent hinged derail stands 3 in. above top of rail and is available in one-way or two-way styles. Lifting lever accessory reduces lifting effort to less than 20 lb. Portable one-way derail stands 2¾ in. above top of rail and weighs 35 lb.

Walls & Forms Inc.    Dallas, TX 75374
Oct 23, 2008 With 2 screws at each corner, 4-WayFrames can be assembled without special tools or installation crew. Frames are front-loading and do not need to be disassembled to change graphics. Standard backer is 1/8 in. thick low-pressure laminated hardboard surfaced white on front side for interior use. Available in choice of standard 3-mil clear satin anodized or black anodized finish, frames come in 9 sizes including 8½ x 11, 11 x 14, 18 x 24, 36 x 48 in. and more.

Anderson, W. E., Div., Dwyer Instruments, Inc.    Grandview, MO 64030
Oct 23, 2008 Requiring no external power sources, Series 38R feature die-cast aluminum housing with fully enclosed bellow assembly and internal over-range protection. Valves, offered in ½-6 in. connection sizes and 1/8-6 in. port sizes, are available with bodies in single-seated, direct or reverse-acting; double-seated, direct or reverse-acting; and 3-way designs with 4 choices of body material. Actuators are available with or without indicating dials or in Fail-Safe versions.

WAGO Corp.    Germantown, WI 53022
Oct 23, 2008 WINSTA® MINI 890 Series is offered as cord-end plugs and sockets as well as snap-in variants for through-panel mounting and distribution blocks. It fits through 5/8 in. (2-pole) or 7/8 in. (3-pole) knockouts and has voltage/current rating of 600 V/10 A. Connector features CAGE CLAMP®S Spring Pressure Connection Technology that terminates all conductor types, and tool-free PUSH WIRE® direct insertion of solid or ferruled-stranded conductors AWG 22-16.