Intermec Corp.    Everett, WA 98203
Nov 05, 2012 Intended for warehouse operations, CK3X offers choice of integrated area imagers for standard range or near/far range scanning. It can withstand 5 ft drops to concrete and is supported by RF standards, 802.11 a/b/g/n, and Bluetooth® radio as well as optional RFID reader accessory. For light industrial and retail environments, CK3R employs EA31 imaging engine, has laser-etched keypad, and withstands 4 ft drops to concrete. Both computers support omni-directional scanning of 1D and 2D barcodes.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Nov 05, 2012

Rugged 20 GHz N9344C, 13.6 GHz N9343C, and 7 GHz N9342C handheld spectrum analyzers are designed for in-field applications like instrument remote control and peak power measurement of pulsed signals. Analyzers feature RRC filter for measuring LTE/W-CDMA channel power and adjacent channel power ratio. Password-controlled keypad lock/unlock and socket and telnet connection for SCPI are included. Products also feature channel standards for LTE, Wi-Fi, and WiMAX™.

Smith & Loveless, Inc.    Lenexa, KS 66215 1234
Nov 05, 2012 Comprising V-FORCE BAFFLE™, S&L PISTA® TURBO™ Grit Pump, and PISTA®Works™ Grit Washer featuring TRI-CLEANSE TECHNOLOGY™, PISTA®Works™ integrates screening, grit removal, and grit washing into one system. PLC-based control system includes touch screen, color HMI interface, and NEMA 4X panel. Offering peak flow capacity from 0.5–7.0 MGD, depending on model, system also includes ANSI flanged connections, 6 mm OBEX™ Spiral Fine Screen, manual bypass bar screen, and epoxy-coated carbon steel skid.

American Portwell Technology    Fremont, CA 94538
Oct 31, 2012 Based on Intel’s mobile QM77 PCH supporting third generation Intel Core i7/i5/i3 processor with power management technology, RUBY-D714VG2AR features four 240-pin DIMM sockets to support dual-channel DDR3 1,600/1,333 SDRAM up to 32 GB, and dual display support via VGA/DVI-D/HDMI. Board provides dual Intel GbE LANs, 4 USB 3.0 connections at rear I/O, and 6 USB 2.0 connections via onboard headers, plus 6 serial ports and 5 SATA interfaces with support for RAID 0/1/5/10 and CF-SATA II.

Lasx Industries, Inc    Saint Paul, MN 55110
Oct 30, 2012 Integrating straight line, downweb laser processing into pouching equipment by Totani America, Inc., LaserSharp® PL40 optimizes easy open packaging operations. Independent position adjustments provide precise control over score line crossweb positioning and start point placement. Laser modules can be positioned for inline scores or offset slightly for tabbed packaging. By intelligently controlling score depth through all machine speeds, embedded control guarantees score continuity and quality.

American Portwell Technology    Fremont, CA 94538
Oct 30, 2012 Utilizing Intel® Platform for Communications Infrastructure, CAR-5020 targets network security, communications, and infrastructure market. Intel® QuickAssist Technology, supported by Intel Communications Chipset 89xx Series, provides encryption/decryption and offloading workload acceleration from processor. In addition to dual Intel® Xeon® processors E5-2600 series with up to 16 cores and 2 QPI links, server supports dual-channel DDR3 1333/1066 UDIMM/ RDIMM memory (128 GB max).

American Portwell Technology    Fremont, CA 94538
Oct 30, 2012 Occupying less than 105 x 148 mm footprint on desktop, CAD-0215 is based on embedded AMD G-Series APU T24L with AMD Virtualization™ (AMD-V™). Solution features AMD64 support for 64-bit OSs and supports 4 Gigabit Ethernet ports, 8 GB DDR III memory, 2 x USB 2.0 ports, CompactFlash slot, and optional 2.5 in. HDD. Consuming less than 25 W, appliance employs system fan that produces less than 35 dB.

Acrosser Technology    Cypress, CA 90630
Oct 30, 2012 Featuring Intel HM76 mobile chipset and FCPGA 988 socket for 3rd generation Core i mobile computer platform, Model AIV-HM76V0FL includes smart power management subsystem, which enables user to define power on/off sequences through software interface or BIOS setting. System includes HDMI/DVI/VGA video outputs, 4 USB 3.0, CAN bus, Wi-Fi, 3.5G wireless WAN, Bluetooth, and GPS. Operating from -20 to 60°C, computer utilizes advanced heat pipe, heat sink, and thermal pad to handle heat generation.

Banner Engineering Corp.    Minneapolis, MN 55441
Oct 30, 2012 To provide embeddable communication capabilities for Q45 wireless sensor network, SureCross® B2Q Gateway Module offers 2 sourcing discrete outputs and DIP switches that let users select one of 8 defined I/O mapping configurations to map inputs from up to 2 wireless sensors to gateway's outputs. Included Site Survey feature analyzes network’s strength and reliability, and transceivers provide bidirectional communication between Gateway and Q45.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Oct 30, 2012 Available in sized packages ranging from medium to 2XL, Premium Welding Gear Ready-Pak® contains top-grade personal protection equipment for welding and other fabrication tasks. Each kit includes VIKING™ 3350 Series variable shade 6–13 black helmet, Shadow™ split leather sleeved jacket, leather MIG/Stick welding gloves, and leather SteelWorker® gloves as well as Finish Line™ clear safety glasses, split leather flame-resistant welding sleeves, flame resistant doo-rag, and industrial duffle bag.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Oct 30, 2012 Comprised of 3 models with single outputs of 5, 12, and 24 Vdc, 50.8 x 50.8 x 20.0 mm RUW15 series exhibits immunity to input surges and is able to ride through drop-outs of indefinite duration across input range via addition of external capacitor; output can be maintained for up to 120 ms at full load from any input when using 900 µF capacitor. Products suit transport and industrial applications where input voltage may vary widely and hold-up capability is required.

CRC Industries, Inc.    Warminster, PA 18974
Oct 30, 2012 Supporting continuous operation up to 350°F, CRC TAC 2™ will bond to chain/wear surfaces to keep them in peak operating condition by reducing friction and wear that cause metal fatigue. Tackifier enables lubricant to cling to metal surfaces without increasing viscosity, which lets product penetrate and coat vital chain pin and bushing areas. While Molybdenum content provides cling-ability to avoid sling-off or excess dripping, blue color fosters identification of lubricated parts and equipment.

CRC Industries, Inc.    Warminster, PA 18974
Oct 30, 2012 Non-conductive, non-corrosive, and non-staining, T-FORCE dissolves grease, oil, and sludge for efficient operation of mechanical equipment. Product has no flash or fire point and evaporates rapidly, leaving no residue. Featuring dielectric strength of 33,300 V, degreaser is NSF K1 Registered for use in meat and poultry plants and contains no Class I or Class II ozone depleting chemicals.

Westermo    Stora Sundby   Sweden
Oct 30, 2012 EN 50155-approved, managed, 12-port Viper devices help meet demand for communication networks with high data rates onboard railway rolling stock to support video, LCDs, and WLAN access points. Contributing to infrastructure for creating intelligent trains, 4 models provide range of standard Ethernet, Gigabit Ethernet, and PoE port options as well as routing functionality. Switches deliver up to 66 W of power across PoE ports and can isolate input DC voltage from connected devices.

Baumer Ltd.    Southington, CT 06489 1534
Oct 30, 2012 Featuring OneBox design, O500 Series includes 3 sensors types: diffuse sensor with background suppression, SmartReflect light barrier without reflector, and retro-reflective sensor, all with same through holes and control elements. qTeach wear-free teach process enables sensors to be taught-in by touching them with any ferromagnetic tools. Blue LED guides user through teach procedure. With qTarget, light beam is aligned to fixing holes by design, minimizing adjustment operations. 

TEKO Enclosures    Bridgeville, PA 15017
Oct 30, 2012 Available with optional sealing gaskets in 6 colors for color coding and branding, TEKAM Enclosures feature all aluminum design for RFI/EMI protection. Each has extruded case body with 2 diecast end panels. Case extrusion includes series of internal guide rails for mounting slide-in PCBs. Supplied with external dimensions from 2.75 x 2.36 x 1.22 in. to 6.89 x 4.17 x 1.81 in., enclosures come with flat end panels for hand held or portable use, or end panels with integrated wall mounting flanges.

EMUGE-FRANKEN    Rückersdorf   Germany
Oct 30, 2012 Featuring Softsynchro® Minimum length compensation, Softsynchro® Modular Series supports tool shanks with male or female center, length adjustments of tool, as well as different coolant-lubricant systems. HSK-transfer element is available for 1-channel minimum quantity lubrication system, 2-channel MQL system, and standard internal coolant-lubricant system. Different length adjustment screws are available for male or female shank center type adaptation.

PolyScience Div. Of Preston Industries Inc.    Niles, IL 60714 4588
Oct 30, 2012 Designed for fecal coliform and E.coli testing, Coliform Bath features ambient +10–135°C temperature range and ±0.7°C temperature stability. Unit is equipped with 28 L reservoir, MX temperature controller, hinged see-through gable cover, and single speed pump, as well as user-adjustable temperature alarms, calibration capability, and chemical-resistant top plate. Backlit readout displays actual and set point temperatures and temperature units plus high/low temperature alarm levels.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Oct 30, 2012 Providing IP00 to IP23 protection, Draloric VSGR features power rating of 5–20 kW, resistance range from 0.1–75 Ω, resistance tolerance of ±5% and ±10%, and TCR of 250 ppm/K. RoHS-compliant resistor complies with Vishay Green standards and operates from -25 to +250°C for use in extreme environments. Device may be used as converter and brake resistor in windmill, solar, diesel generator, turbine, and railway applications.

Steinbichler Optotechnik GmbH    Neubeuern   Germany
Oct 30, 2012 With T-TRACK CS and T-SCAN CS, large objects can be accurately digitized. T-TRACK CS, supporting combination of surface and point measurement, is ready for operation within minutes, making it suitable for mobile use. Featuring high dynamic range for data acquisition on various object surfaces, T-SCAN CS offers fatigue-free 3D scanning in difficult to reach areas. Applications include quality control, Rapid Prototyping/Rapid Tooling/Reverse Engineering, and capture of art/historical objects.