STMicroelectronics    Lexington, MA 02421
Oct 20, 2008 Featuring 1.98 x 2.08 mm flip-chip package, model EMIF10-LCD03F3 achieves better than -40 dB attenuation in mobile frequency range of 900 MHz to 3 GHz. It can withstand 15 kV contact discharge at inputs and outputs exceeding IEC61000-4-2 Level 4 standard. With bandwidth of 200 MHz at -3 dB, 30 pF maximum line capacitance, and 6 nsec max rise and fall times, device provides transparent EMI filtering and ESD protection for high-speed signals.

Joraco, Inc., Toggle-Aire Div.    Smithfield, RI 02917
Oct 20, 2008 Synchro-Sig Anti Two Hand Actuator Model SS-PB retrofits to any TOGGLE-AIRE or DIRECT-AIRE press, regardless of age, and provides operator with ergonomically engineered, anti tie down actuator. Actuating buttons found at each end of unit must be simultaneously depressed to provide signal to press - when one or both buttons are released output is terminated. Both buttons must then be totally released before unit will allow another signal to press.

Joraco, Inc., Toggle-Aire Div.    Smithfield, RI 02917
Oct 20, 2008 Featuring user-programmable 24 V PLC, Custom Press Feed Payout System feeds, aligns, die-cuts, punches, or assembles combined delicate materials and pulls through finished product at up to 100 SPM with +0.001 in. accuracy. It handles up to 5 plies of material from 5 separate reels, and utilizes photo-optic proximity sensors and two-hand actuator for operator safety. Standard features include die area safety interlocks and emergency stop and reset buttons.

Joraco, Inc., Toggle-Aire Div.    Smithfield, RI 02917
Oct 20, 2008 Delivering full force over entire stroke, Joraco Direct Air Press is suited for range of manual and semi-automatic assembly operations. Press is offered with standard 6 in. stroke, providing from 500-5,000 lb constant force, in both C and H-frame configurations manufactured from steel plate. It is available with 3 RAM styles, internal- or external threaded 1 in. RAM, and one with hole for shank mount. Options include pneumatic counters, dwell timers, and custom platens and tooling.

Joraco, Inc., Toggle-Aire Div.    Smithfield, RI 02917
Oct 20, 2008 Toggle-Aire® presses are available with tubular eyelet rivet machines. Model 1030-R can handle tubular rivets and eyelets up to 3/8 in. dia in soft steel, brass, or aluminum, while model 1530-R is suited for heavier applications, such as stainless steel. Fully pneumatic rivet machines feature automatic hopper feeders, integrated AC powered cam-belt drive motor, and non-binding jam-free feeding tracks.

Joraco, Inc., Toggle-Aire Div.    Smithfield, RI 02917
Oct 20, 2008 Pneumatically operated, Toggle-Aire® Multi-Station Indexer performs 100% pre- and post-assembly parts inspection automatically at 1,600 parts/hr. It is suitable for pressing inserts, swaging, broaching, crimping, and related assembly operations, and can be equipped with 3-10 ton presses. Featuring ram to station accuracy of ±.0015 in. with ±.001 in. press component repeatability, unit offers user-programmable dwell timers and mechanical and optical sensing inspection options.

ChristianSteven Software Ltd    London W1G 9QR  United Kingdom
Oct 20, 2008 Allowing export of RS reports to multiple printers, FTP, Secure FTP, email, folders, FAX and SMS, SQL-RD helps schedule and manage MS SQL reporting services reports on numerous servers from single application. It allows user to set up frequencies like daily, weekly, monthly, or custom calendars and exception calendars, while its' dynamic schedules enable linking and automating reports, data and destinations. Software integrates seamlessly with Outlook and Exchange Server.

GAO RFID Inc.    Toronto   Canada
Oct 20, 2008 Ironside, Survivor, and Halo are Gen 2 UHF RFID tags suited for harsh environments. Ironside has reading range of 8m, can be affixed to any metal surface mechanically or by using industrial adhesives, and meets AS5678 specification. Suited for container applications, Survivor hard passive tag can be used to track vehicles and metal pipes. Supporting read range of 3-4 m, Halo works with fixed or handheld RFID reader, and suits inventory and warehouse use and tracking IT assets.

GAO Tek Inc.    Toronto M1B2K4  Canada
Oct 20, 2008 Hot-swappable XFP modules are 100% CISCO compatible, and can be removed from host device. Pluggable interfaces include data speeds of 10/9.9 G. XFP-based systems offer features for physical network connectivity, including media converters, distance extenders, cross-connects, Ethernet switching and routing equipment, and wave division multiplexing solutions.

Zmanda, Inc    Sunnyvale, CA 94085
Oct 20, 2008 Designed for SMBs, Zmanda Internet Backup performs back up of Windows Server and Live applications such as Microsoft SQL Server and Exchange Server to Amazon's online storage service. With built-in point-in-time recovery capability, Zmanda Recovery Manager v3.0 performs backup of live MySQL databases leveraging Windows Volume Shadow Copy Service snapshot technology as well as one-click database restore. Both are available as open source solution.

Malvern Instruments Ltd    Malvern Worcestershire WR14 1XZ  United Kingdom
Oct 17, 2008 Zetasizer µV requires 2 µL of sample, allowing measurement of as little as 40 nanograms of BSA (bovine serum albumin), with samples being recoverable. Device employs both dynamic and static light scattering and enables measurements to proceed with no user input, which are managed and supported by incorporated software. Measured properties are used to help solve application problems in bioprocessing, drug target development, and protein therapeutics.

Conductive Compounds, Inc.    Londonderry, NH 03053
Oct 17, 2008 Silver-filled, 2-part epoxy adhesive (EP-600) is designed to attach electrical components to metal/plastic substrates. It accelerates manufacture of PTF circuits built on temperature-sensitive substrates and cures at temperatures from 20 to 140°C with times from 48 hr to 2-6 min; snap cure times are possible at higher temperatures. Elasticity allows for differences in thermal expansion properties of bonded components and for flexing/bending substrates without fracturing SMT joints.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Oct 17, 2008 With PowerConnect(TM) Technology, Power Wave® C300 Wire Feeder Welder enables user to automatically switch from 200-600 V, 50 or 60 Hz, and single- or 3-phase welding with no manual reconnect. Tribrid(TM) Power Module offers 88% efficiency at 250 A and power factor of 0.97. Welder includes 8 memory locations to recall procedures with ability to lock in operator limits. Rated IP23, C300 is suitable for production welding, construction, aerospace, automotive repair, and general fabrication.

Hirschmann Engineering USA, Inc.    Schaumburg, IL 60173
Oct 17, 2008 In addition to bearings with minimum radial run-out, H80R.MNCM incorporates AC variable speed motor and Heidenhain encoder for direct measurement positioning of ±5 arc sec. Programmable variable speed AC control (H1625.AC3) allows adjustment of continuous high-speed rotation and indexing, which can be used for automatic operation via M-Code. Spindle can also be integrated directly to certain machine controls, allowing high-speed rotation, indexing, and turn while burn applications.

Siemens Energy & Automation, Inc.    Alpharetta, GA 30005
Oct 17, 2008 Suited for migrating basic hardwired control design to programmable controller, LOGO! TD consists of backlit LCD with 128 x 64 pixel resolution capable of displaying 4 lines of text with up to 12 characters per line. Bar graph can be configured to represent any numeric value, and text ticker allows up to 24-character text message to scroll horizontally across screen. There are 6 buttons for screen navigation/data entry and 4 configurable user function buttons.

AVX Corp.    Myrtle Beach, SC 29578
Oct 17, 2008 Slide-in 9162 Connector reduces installed height of SIM card to less than 1.70 mm, giving 0.70 mm profile from PCB to underside of card. Featuring hinged lid with rails, Lockable 9162 Connector lets user locate, align, and lock SIM card in place. It has 1.50 mm installed height to base of SIM and 2.50 mm total height. Also available, combined memory card device integrates SIM and push/push micro SD(TM) connectors to minimize board space and allow simultaneous insertion of 2 cards.

Rogers Corporation    Rogers, CT 06263 0188
Oct 17, 2008 Using dur-E-volt(TM) constant frequency peak current mode control LED driver, LED string is driven at fixed current independent of supply voltage. It operates high brightness LEDs from 8-450 Vdc sources and currents ranging from few mA to over 1 A. RoHS-compliant driver handles one to hundreds of LEDs in series or parallel combinations and exhibits 90% efficiency. LED dimming is controlled by adjusting duty cycle of PWM input pin or adjusting voltage to dimming input pin.

UltraVolt Inc.    Ronkonkoma, NY 11779
Oct 17, 2008 Capable of operating in DC, reversible, and amplifier modes, HVA Series provides programmable high-voltage DC to greater than 1 kHz output. It exhibits 10 ppm temperature coefficients on +10 Vdc reference and 25 ppm coefficients on output voltage monitor and high voltage output. Able to source and sink current, series provides ppm-level line and load regulation. Respective output voltage ranges for bipolar and unipolar modules are 0 to ±5 kV and 0 to ±10 kV.

AutomationDirect.com    Cumming, GA 30040-9905
Oct 17, 2008 By itself, powered CLICK® CPU unit can function as complete PLC system. It features 8 inputs and 6 outputs, available in 4 combinations of built-in I/O types, as well as 11 option modules for flexible system configuration up to 142 I/O. Two 24 Vdc power supply options, with .5 or 1.3 A outputs, can be used to power PLC, which supports 8K steps of Flash EEPROM program memory and 8K words of data memory. There are also 2 built-in RS-232 RJ12 communications ports.

Techno, Inc. - CNC Router Systems    New Hyde Park, NY 11040
Oct 17, 2008 Available with single/dual carriage options, 75 mm wide Narrow Profile Slide 2 is constructed from single rigid aluminum extrusion profile and capable of speeds up to 24 ips. Three sides of T-slots facilitate mounting on any machine assembly, and lengths are offered up to 2,722 mm. Internal components include 2 precision steel rails, bearing blocks, and 16 mm dia anti-backlash ball screw drive. Carriage plate is also included, as are internal home reference and far end limit switches.