US Products    Coeur D'Alene, ID 83815
Apr 08, 2008 Available with 18 in. cleaning path, self-contained Agitator 18 applies chemical to carpets, agitates chemical, applies fresh water to remove soil and chemical, and removes soiled water with vacuum system - all in one pass. EZ-pull ergonomic belt helps minimize back, elbow, and shoulder strain.

Master Bond, Inc.    Hackensack, NJ 07601
Apr 08, 2008 Suited for bonding, encapsulation, and coating, 2-component EP21LM-3 develops tensile modulus greater than 100,000 psi and tensile shear strength greater than 2,300 psi. Viscosity of 37,000 cps enables product to flow evenly and smoothly without application of pressure. When cured, polymer has Shore D hardness of 64 and resists thermal cycling as well as water, oil, fuels, and most organic solvents over temperature range of -65 to +250°F.

Kin-Tek Laboratories    LaMarque, TX 77568 4202
Apr 08, 2008 Available with O2, CO, CO2, CH4, and C2H2, Trace Source(TM) 57 Series is used in Gas Standards Generators to dynamically blend ppm and ppb mixtures directly from pure gas. Tubes use controlled pressure of analyte vapor as permeate source, allowing very low boiling compounds. Achieving dilutions ranging from less than 103:1 to over 109:1 in single step, tubes are suitable for preparing trace mixtures containing atmospheric gases, light hydrocarbons, hydrides, and acid gases.

Lumex Inc.    Palatine, IL 60067
Apr 08, 2008 Adding impact and product differentiation to all types of electronics equipment, InspirationLEDs(TM) utilize high-brightness InGaN-on-silicon chip technology that provides light output at 470 nm. Phosphor coatings are applied to shift color to pink, purple, or turquoise. Housed in T-5mm packages with radial leads and epoxy lenses, RoHS-compliant units feature axial intensity of 2,200 mcd at If of 20 mA, and viewing angle of 20°.

SKF USA, Inc.    Lansdale, PA 19446
Apr 08, 2008 Manufactured from steel with very low oxygen content, Explorer Deep Groove Ball Bearings offer running accuracy to ISO tolerance class P5 and ABMA ABEC Class 5; dimensional accuracy to ISO tolerance Class 6 and ABMA ABEC Class 3; and width tolerance tighter than ISO tolerance class Normal. Advanced sealing designs maximize grease retention and protect against contaminants without compromising speed. Lubricant options include ultra-quiet, food quality, and high-temperature.

Omega Engineering, Inc.    Stamford, CT 06907
Apr 08, 2008 Measuring 3.75 in. square, XL OCS Model HE-XE102, 203, and 204 are all-in-one controllers with sunlight-readable, touchscreen graphics display used for process visualization and machine control. Products support MicroSD(TM) memory modules and feature built-in I/O with removable terminal blocks as well as 2 serial ports with downloadable protocol. Suited for water treatment, packaging, and agriculture industries, all models integrate controller, operator interface, networking, and I/O.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Apr 08, 2008 Exhibiting low quiescent current of 70 µA, MCP1790 and MCP1791 are high-voltage linear regulators (LDOs) respectively available in 3- and 5-pin thermally capable SOT-223 or DDPAK packages. Features such as their ability to operate at continuous input up to 30 V, continuous 70 mA output, and ceramic capacitor stability make these products suited for automotive and industrial applications. Built-in load-dump protection to 43.5 V shields system from voltage transients.

C & H Distributors, Inc.    Milwaukee, WI 53214
Apr 08, 2008 European-styled Eurokraft benches come in several style variations, with locking drawers and open storage; open shelf and locking cabinet; full-width cabinet for large tools; or storage drawers and locking cabinet for secure storage. All versions measure 35½ in. high and have 1¼ in. thick work surface. In addition to welded push handle for maneuverability, features include 2 rigid and 2 swivel casters with brakes.

Linear Technology Corp.    Milpitas, CA 95035
Apr 08, 2008 Offered in 3 x 3 mm DFN-12 package, LTC4443/-1 can sink 5 A max and source 2.4 A max for driving upper and lower power N-Channel MOSFETs over 6-9.5 V range in synchronous rectified converter topologies. Products can also drive multiple MOSFETs in parallel. Rise time of 12 nS and fall time of 8 nS, when driving 3,000 pF load, minimize switching losses. While nominal VCC undervoltage lockout is 3.2 V, -1 version offers 6.2 V for driving standard 5 V logic N-Channel MOSFETs.

DEK    Rolling Meadows, IL 60006
Apr 08, 2008 Designed to optimize process control, operator efficiency, and machine utilization, Instinctiv(TM) v9 features UI that incorporates control of HawkEye(TM) post-print inspection technology to facilitate and accelerate paste on pad verification. HawkEye operates at line beat rate, delivering go/no-go indication for each board and isolating faulty boards in real-time. Paste on pad deposit percentages are displayed on set-up bar chart, with variable window, within process.

DEK    Rolling Meadows, IL 60006
Apr 08, 2008 Delivering flexible substrate image size range from 1.50 x 2.00 in. to 24 x 24 in., Photon Vi handles large board products up to 16.5 lb in weight and 0.236 in. thick. Fully adjustable transport rails and 2-speed board transport control system with software time lag control enable product size conversion to large boards. Platform is pre-configured with upgraded understencil cleaner deploying 4-stage head, providing cleaning for 24 in. wide image using wet, vacuum, and dry strokes.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Apr 08, 2008 Based on USB-powered Digital Signal Controller board with integrated debugger and programmer, MPLAB® Starter Kit for dsPIC® DSCs comes complete with MPLAB IDE and MPLAB C30 C complier software, and sample programs and hardware for demonstrating speech and audio applications. Operating at 40 MIPS, DSC board has 256 KB of Flash program memory and 16 KB of RAM, 12-bit ADC, peripherals that support audio PWM, and 16-/24-/32-bit audio CODEC with sampling frequencies up to 48 kHz.

ON Semiconductor, LLC    Phoenix, AZ 85008
Apr 08, 2008 Operating with input up to 600 V, Models NCP5106, NCP5104, NCP5111, and NCP5304 provide 2 outputs for direct drive of 2 N-channel power MOSFETs or IGBTs arranged in half-bridge configuration. Units feature dv/dt immunity of 50 V/ns and are 3.3 and 5 V input logic compatible. Offered in SOIC-8 and PDIP-8 packages, devices use bootstrap technique to ensure proper drive of high-side power switch. Applications include white goods, lighting ballasts, and motor control.

DATRON Electronic GmbH    Mühltal 64367  Germany
Apr 08, 2008 With set-up area of 1,910 x 1,950 x 2,065 mm, 3-axis M10 features work area of 700 x 1,000 x 240 mm. Portal machine has working table made of granite and spindle with HSK-E 25 interface turns at speeds up to 40,000 rpm. Consuming 4 kW under 80% load, it includes X/Y/Z probe, via which zero and reference points are automatically set up, and PC-based machine control with RAM, Ethernet, and USB interfaces.

Anderson Power Products    Sterling, MA 01564
Apr 08, 2008 Available from 3-30 circuits, PowerMod® connector series features gold-plated contacts rated for 30 A continuous that may also be used in low-amperage signaling applications. Pins are available in 4 sequential mating lengths for mate-first/break-last and make-last/break-first design circuit flexibility. Offered with straight PCB, right-angle PCB, panel, or cable mountings, series incorporates UL94V-O insulators that are mechanically polarized and IR reflow-compatible.

Fluke Corp.    Everett, WA 98203
Apr 08, 2008 Fluke 113 Utility Multimeter includes VCHEK(TM) LoZ low impedance measurement function that allows users to simultaneously test for voltage or continuity. Min/Max function lets operator record signal fluctuation. Device can also perform diode tests and provides both auto and manual ranging capabilities. It is compliant with CAT III 600 V and CAT IV 300 V standards and includes backlit display, holster with probe holders, TL75 test leads, and 9 V battery.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Apr 08, 2008 Supplied in 31 x 11 x 23 mm housing, ML7 Background Suppression (BGS) Photoelectric Sensors offer adjustable sensing range and automatic crosstalk protection. Latter enables multiple ML7 sensors to be mounted side-by-side, with no interference between units. While LED indicators relay power and output status as well as diagnostic information, 4-in-1(TM) output technology automatically detects connected load and sinks or sources as needed.

Stone Construction Equipment, Inc.    Honeoye, NY 14471
Apr 08, 2008 Featuring 25.5 in. drum width and hydrostatic transmission, WBR650 is designed for confined area compaction in trenches as well as general asphalt patching and repair. Unit is powered by 10 hp Lombardini diesel engine, includes back-up recoil start, and offers compaction force of 2,925 lb. With max travel speed of 2.5 mph, roller has 10 in. curb clearance and 1 in. side clearance on both sides. Centrally located eccentrics evenly distribute compaction forces over drums.

Schneider Electric    Palatine, IL 60067-7399
Apr 08, 2008 Featuring 11 standard enclosures, 240 V NQ Panelboards will accept Square D QO® plug-in and QOB bolt-in circuit breakers. Ready-to-install subassembly kits are available to outfit panelboard interior, including feed-through and sub-feed through lugs, sub-feed circuit breakers, TVSS interiors, 200% neutrals, and copper neutrals and grounds. Panelboards are available with 6 interior circuit counts, including 18, 30, 42, 54, 72, and 84.

OceanServer Technology Inc.    Fall River, MA 02723
Apr 08, 2008 Measuring 1 x 1 x 0.3 in. and weighing less than 2 gm, Series OS5000 Digital Compasses incorporate 3-axis magnetic sensors with 3-axis accelerometers to provide 0.5° nominal accuracy, 0.1 resolution, ±180° roll, and ±90° tilt, and include electronically gimbaled tilt compensation. Featuring ASCII interface, hard- and soft-iron calibration, and user-configurable data formatting, units provide up to 40 Hz data update rate, and can be connected via RS232, TTL, or USB.