Ameropean Corp.    North Haven, CT 06473
Nov 02, 2011 Constructed of elastic material, Way Wipers keep slide ways clear of swarf, dust, and other abrasive materials found in workshop environments. Synthetic rubber material is resistant to mineral oils and cooling emulsions and features vulcanized metal reinforced facing. Silicone rubber wipers and wipers without metal facing are also available to accommodate unique requirements. Available in standard strips of 22 or 39 in., wipers can be adapted to shapes of slide ways.

Festo Corp.    Hauppauge, NY 11788
Nov 02, 2011 Designed for synchronous and coordinated motion solutions based on Festo CPX architecture, Model CPX-CMXX is suited for applications involving multiple individual axes or Cartesian kinematics. Both individual axis movements and multi-axis synchronous or coordinated motion can be controlled via CAN bus. Supporting variety of Festo drives, module offers connectivity via Profibus, Ethernet IP, and ProfiNet and is suited for range of handling solutions.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Nov 02, 2011 Available in through-hole or surface mount configurations, UWS Series accommodates input range of +18 to +75 Vdc and offers outputs of 3.3, 5, or 12 Vdc. Up to 54 W output is available without need for forced air cooling. With input to output isolation of 2,250 Vdc, output is protected from spikes, transients, and noise on input. Converters meet DOSA standard for 1/16th brick dimensions of 1.31 x 0.91 x 0.36 in. and are suited for data and telecommunication applications.

FANQUIP    Singleton DC   Australia
Nov 01, 2011 Manufactured on casters for mobility, Fanquip welding fume extractor filters and clears air of highly toxic and potentially carcinogenic fumes down to 0.3 micron. It features 2-stage filtration as well as onboard filter monitor and can be supplied with 2, 3, or 4 m arms, which measure 150 or 200 mm in diameter. Product can also be used in food sector as general air cleaner for dust.

ARNOLD UMFORMTECHNIK GmbH & Co. KG    D-74670 Forchtenberg-Ernsbach   Germany
Nov 01, 2011 TriPress® fasteners, featuring triangular cross-section shanks, press into round core holes, which take on shape of fastener as result for form-fit joint. After shank is pressed in, fastener is resistant to stripping and pull-out. LocTec® screw system combines special screw drive geometry with special assembly tool, which makes it impossible to loosen or remove fasteners without destroying joint. Disassembly is only possible by drilling out screw or cutting slot in screw head.

Absopulse Electronics, Ltd.    Carp, ON K0A1L0  Canada
Nov 01, 2011 Developed for start-up of motor in electric switchgear, HBC 319-A/125FTS delivers 750 W peak output power without fan cooling. It generates 125 Vdc at 4 A, with 6 A peak current for 30 sec during motor start-up stage. To ensure output voltage remains constant, several modules can be connected in parallel. Input accepts 115 Vac, with 230 Vac and custom inputs also available. Measuring 130 x 64 x 353 mm, power supply also has built-in redundancy diode and electronic protection features.

HURON GRAFFENSTADEN SAS    Illkirch 67401  France
Nov 01, 2011 Suited for roughing and finishing work in 5 simultaneous axes and on 5 faces, K3X 8 Five employs standard spindle that reaches 24,000 rpm with torque of 40 Nm for 25 kW. Table inclined in 55° plane enables negative machining angles up to -20° to be reached. Consequently, angle of spindle axis in relation to table ranges from 0° to 110°. Milling center architecture consists of fixed gantry and bed and 500 mm dia table that rotates 360° and tilts -30°/+180° and accommodates up to 250 kg.

American Conec Corp.    Garner, NC 27529
Nov 01, 2011 Compliant with USB 2.0 specifications, Mini-USB Connector is water-resistant with internal components housed in black plastic. Bayonet locking-ring, measuring 12 mm in diameter, is vibration-resistant and provides audible snap indicating connectors are securely mated. Contacts are phosphor bronze and gold-plated with contact resistance of 50mW max and insulation resistance of 100mW. Operating from -40 to +80°C, connector is rated 1.0 A max at 25°C.

AMETEK Test & Calibration Instruments    Largo, FL 33773
Nov 01, 2011 Delivering laboratory accuracy, JOFRA® HPC550 (single sensor) and HPC552Ex (dual sensor) are suited for use in hazardous oil, gas, petrochemical, and other applications. Both handheld, on-site, field-usable instruments offer user-configurable information display, 15 pressure units, mA input, and percent error calculation. JOFRA HPC552 Ex can handle 2 pressure ranges, and both models feature ATEX/IECEx certification for use in potentially explosive situations.

Viking Corp., The    Hastings, MI 49058 9706
Nov 01, 2011 Along with pressure rating of 250 psi, Model G-6000 has ductile iron body with black e-coat on interior and exterior for corrosion resistance. This 6 in. valve is available in 4 system configurations: dry pipe, single interlock preaction, double interlock preaction, and Surefire® fail-safe preaction system. In dry system configuration, valve includes external reset feature. Internal check valve is also offered as standard feature.

Doosan Infracore American Corporation    Suwanee, GA 30024
Nov 01, 2011 Powered by 6-cylinder interim Tier 4 compliant diesel engine with gross power output of 500 hp at 2,100 rpm, Model DA40 delivers gross torque of 1,750 ft-lb at 1,300 rpm. Transmission offers 8 forward and 4 reverse speeds, optimizing power from engine to wheels for maximum traction. Featuring hydro-gas front suspension and 6-wheel drive for equal power distribution, truck has top speed of 36 mph, body capacity of 31.9 yd³, and 40 metric ton payload without tailgate.

Anver Corp. - Anver.Com    Hudson, MA 01749
Nov 01, 2011 Allowing one person to safely handle small parts weighing up to 250 lb, hoist-based VM-Series Assembly Lifter features custom pick-up suction pad for lifting compact metallic loads. It also features manual tilt mechanism for pick-and-place applications as well as compressed air and venturi principle for securely holding loads. Electric chain hoist provides up/down movement to maintain position without drift when stopped, and device is equipped with vacuum leakage sensor.

Burr Oak Tool    Sturgis, MI 49091
Nov 01, 2011 Intended for HVAC and refrigeration applications in heat transfer industry, Model FP-1400 features extensive solid modeling and added weight, optimizing press rigidity for consistent product output. Balanced platform minimizes vibration, while electronic servo-feed centers and balances forces on feed shaft and allows access to left side of press and die. Using touchscreen on control panel, operator can program fin length.

AMETEK Technical & Industrial Products    Kent, OH 44240
Nov 01, 2011 Featuring 3-phase TEFC motors with permanently sealed ball bearings, ROTRON® DR333 and DR433 can agitate solutions, convey parts and products, perform vacuum hold-down and pick-up operations, and dry/clean parts. Model DR333 achieves flows up to 58 scfm, pressures up to 10.8 psig, and vacuums up to 17.5 ihg, while Model DR433 develops max flows to 110 scfm, pressures to 13 psig, and vacuum to 17.6 ihg. Both have threaded cast iron flanges and cast aluminum housing, impeller, and cover.

Parker Hannifin Corp., IPD Instrumentation Group    Huntsville, AL 35805
Nov 01, 2011 Made of 316/316L stainless steel, domestic Parker Plus Tubing and non-domestic Parker Tubing are both available in sizes from 1/8-1 in. OD and marked to indicate size, material, specifications, and heat number. Seamless tubing is intended for systems processing harsh media or corrosive environments where safety and integrity of tubing are critical and leak prevention is paramount. Applications are found in chemical, petrochemical, oil and gas, and power generation industries.

FEI Natural Resources    Milton   Australia
Nov 01, 2011 Featuring portable design for remote locations, such as on- and off-shore drilling rigs in oil and gas industry, QEMSCAN® WellSite(TM) can separate and classify rock types represented in a cuttings sample with greater accuracy, analytical sensitivity, and textural resolution than manual methods. System permits detailed analysis of cuttings properties, such as clay type, matrix density, and grain size, on lithology basis.

Haydon Kerk Motion Solutions    Waterbury, CT 06705
Nov 01, 2011 Using aluminum pulleys and fiberglass reinforced neoprene timing belt, Kerk® RGS/RGW Linear Rail Systems offer drive ratios of 2:1, 1:1, and 1:2 and screw leads from 0.050-1.2 in./rev. Splined aluminum guide rail and 303 SS lead screw have Kerkote® TFE coating, providing permanently lubricated surface. Maximum load capability of RGS is 35 lb in Z direction and 35 lb in hanging/gantry load position, and max roll and yaw moment is 3.25 lb-in. and max pitch moment is 5.66 lb-in.

Radiometrix Ltd.    Watford Hertfordsh WD19 5EZ  United Kingdom
Nov 01, 2011 Intended for social alarm applications, COR3-869-5-SAL receiver complies with EN300-220-2 V2.3.1 (2010-02) Category 1 standard. This 32-channel receiver is available on license-exempt European 869.2-869.250 MHz sub-band for Social Alarms as well as custom frequencies between 865-870 MHz. When paired with EST3 transmitter, wireless data link with 500+ m range can be achieved. With 25 kHz channel spacing, narrowband receiver has receive sensitivity of -120 dBm typ and incorporates RSSI.

Nova Analytical Systems Inc.    Niagara Falls, NY 14301 2398
Nov 01, 2011 Comprised of high-temperature probe, heated filter, and stainless steel internal tubing, Model 7240 is intended for extraction and filtration of gases sampled from industrial applications such as syngas, gasification, and stack gas analysis. Unit mounts directly on sample extraction point and filters gas sample at process temperature. Gas sample is then directed to gas analyzer, which may be located some distance away from sample point.

Mobile Industries, Inc.    Mississauga, ON L5C1W2
Nov 01, 2011 Along with 3,300 lb capacity for moving pallets and skids, ESET33 features electric battery-powered drive system for forward/reverse operation. Charging is accomplished overnight via 110 V outlet, and onboard 24 V battery pack can operate for 8+ hr. Able to achieve speeds to 2.8 mph fully loaded and 3 mph unloaded, truck is available with 48 in. fork length with 20.5 and 27 in. fork width options. Manual pump, operated via ergonomic handle, raises load to full height with 5 cycles.