Sieb & Meyer USA, LLC    Cincinnati, OH 45242
Nov 10, 2008 Designed for high-speed asynchronous and synchronous motors, Models FC80 and FC82 serve as base for applications such as fuel cells, turbo compressors, vacuum pumps, and centrifuges. Intelligent magnetization control minimizes heating of spindle and provides maximum torque when required. Software allows parameterization of up to 8 motor configurations in device, while numerous features for analysis allow optimization of drive in real applications.

Yageo Corporation    Taipei   Taiwan
Nov 10, 2008 Requiring only 3-5 mm in clearance on motherboards, model 5320 Coupling Chip Antenna is suited for micro communication products that are sensitive to environmental interference. It supports bandwidths of 2.4-2.484 GHz, Bluetooth and IEEE 802.11bgn applications, and features average gain of -5.6 dBi, 50W impedance, and maximum power of 1 W. Antenna measures 5.3 x 2.0 x 1.2 mm.

Gems Sensors Inc.    Plainville, CT 06062
Nov 10, 2008 Designed for drinking water and beverage dispensing applications, FT-330 features 316 SS shaft coupled with Delrin® bearings, allowing for accurate measurements during quick dispensing cycles. It is constructed with over-molded electronics and lightweight plastic design for multiple mounting positions. Developed for OEMs who require NSF approved and PPO reinforced materials, sensor is easily customizable for any application.

Magnaplan Corp.    Champlain, NY 12919 5007
Nov 10, 2008 Allowing write-on/wipe-off using 3 different kinds of markers, ALL WAYS® easel pads are white, laminated sheets, which won't tear, crease, wrinkle, bleed, or show through. Each sheet is plain white on one side while rule-printed with light 1 in. squares on other, and can be used with any standard flip chart easel. Kit contains 10 laminated erasable pages (bound or loose), 1 Liquid Chalk® marker, 1 washable marker, 1 permanent marker, 1 visu-wipe, and 1 bottle of Dual Purpose Cleaner®.

Alpha Wire Corp.    Elizabeth, NJ 07207 0711
Nov 10, 2008 Available with operating temperature range of -50°C up to 200°C, cables are designed to meet stringent requirements for use in Wind Turbine Tray Cables in accordance with UL Subject 2277. Cables are suiteed for applications involving power distribution, control, and monitoring within the wind turbine. Optional features included are sunlight resistance, oil resistance (I and II), and FT-4 or IEEE 1202 flame resistance.

General Pipe Cleaners    McKees Rocks, PA 15136
Nov 07, 2008 Delivering clamp-plug-thaw functionality, Hot-Shot(TM) 320/400 unfreeze pipes in minutes to eliminate tearing up floors, breaking through walls, or digging around pipes in frozen ground. Hot-Shot 320 and generates 320 A to thaw up to 100 ft of 1½ in. pipe. Featuring dual-level output, Hot-Shot 400 generates 400 A to clear frozen lines up to 175 ft long with 1½ in. dia lines. If users are on job with only 15 A breaker, they can switch Hot-Shot down to 320 A and pull just 14 A.

E-Switch Inc.    Brooklyn Park, MN 55428 1514
Nov 07, 2008 Available as SPST or DPST, Model LP6 features contact rating of 12 mA at 12 Vdc, contact resistance of 50 mW, insulation resistance of 100 MW, and dielectric strength of 500 Vac. Unit operates from -20 to +70°C and provides 200,000 lifecycles. Applications include computers, servers, peripherals, consumer electronics, testing and instrumentation, and telecommunications.

Bosch Rexroth Corp., Corporate Headquarters    Hoffman Estates, IL 60192-3707
Nov 07, 2008 Compatible with any Rexroth scalable PLC/PAC, Inline I/O Modules include SSI and INC IN, which bring encoder feedback capabilities. SSI features 4 inputs and position detection, which can identify motor position during rotation. Direction can be indicated with INC encoder quadrature signal, allowing machine builders to incrementally fine tune motor to specific degrees. Providing PWM and step and direction control, PWM/2 Module enables machine builders to alter width of pulse.

Mitchell, Inc.    Elkhart, IN 46515
Nov 07, 2008 Equipped with digital touch screen controls and digital operating components, Model 624 AC provides indexing with width of cut from 0.010-24 in. and variable mandrel speed from 0-2,700 rpm. Mandrel features adjustable length from 24-1 in. and stock from 6 in. O.D. to minimum extrudable size that will fit mandrel. In addition to minimizing part handling, automatic angle cutter facilitates molding or extruding of tubes.

Ross Controls    Troy, MI 48083
Nov 07, 2008 Available in nominal size 2 with ¼ and 3/8 port sizes and NPT and BSPP threads, DM2®E Series provides Category 4 machine safeguarding. Memory, monitoring, and air-flow control functions are integrated into 2 identical valve elements inside one body. When synchronous movement of valve elements is sensed during actuation or de-actuation, valves lockout and exhaust downstream air, resulting in residual outlet pressure of less than 1% of supply. Intentional action is required for reset.

Diamond Systems Corporation    Mountain View, CA 94043
Nov 07, 2008 Based on 800 MHz Vortex86SX/DX CPU, Helios features up to 256 MB RAM as well as standard PC peripheral features, including 4 USB 2.0 ports, one 10/100Base-T Ethernet interface, 4 RS-232 ports, IDE interface, and VGA/LCD graphics. Optional on-board data acquisition circuitry includes sixteen 16-bit analog inputs, four 12-bit analog outputs, 40 digital I/O lines, 512-sample FIFO, and 2 counter/timers. Featuring ruggedized design, SBC is suited for embedded applications in harsh environments.

Diamond Systems Corporation    Mountain View, CA 94043
Nov 07, 2008 Based on 500 MHz AMD Geode LX800 CPU, Pegasus operates fanless over extended temperature range of -40 to +85°C. Unit features 256 MB SDRAM, 4 USB 2.0 ports, 10/100Mbps Ethernet interface, RS-232 port, and RS-232/422/485 port, as well as CompactFlash, VGA/LCD graphics, and PC/104-Plus stackthrough expansion. Onboard Ultra DMA 33 IDE hard drive interface supports 2 devices. For resistance to shock and vibration, hardwired jumpers and latching connectors are available.

Lasit, USA    Branford, CT 06405
Nov 07, 2008 As portable and fully enclosed Class One system with desktop form factor, LaserTab® comes with fiber laser, galvo scan head, computer, and software that supports vector and raster engraving on plastics and metals. Motorized Z axis with encoder has 15¾ in. travel and enables marking of components ranging from 0-150 mm thick. Air-cooled and service-free, system features 100,000+ hr MTBF rating and expandable tooling area starting at 12 x 16 in.

Westcott Distribution, Inc.    New York, NY 10014
Nov 07, 2008 Designed for spill-free, environmentally safe transfer of virtually any chemical or liquid, GT Multi-Pump Dispensing System allows simultaneous multiple-liquid transfer stations of GoatThroat pumps to operate from single shop line with 2-4 psi. Since pumps pose no sparking hazard, they are suited to environments where electric pumps cannot be used but multiple liquids are needed. Pumps meet RoHS and US FDA food safe requirements.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Nov 07, 2008 Suited for adhesive dispensing applications, Loctite® Consumables include dispense tips, static mix nozzles, and syringe barrel components. Offered in stainless steel, tapered polyethylene, and flexible polypropylene, dispense tips feature positive locking helical thread design to ensure they stays intact. Static mix nozzles meet any 2-part adhesive dispensing requirements, while syringe barrels and components enable consistent single-component adhesive dispensing.

Ideal Industries, Inc.    Sycamore, IL 60178
Nov 07, 2008 PowerPlug push-in disconnect lets electricians safely disconnect hot and neutral ballast wiring prior to fixture servicing, preventing contact with live voltage. Halves of disconnect are snapped together to re-power fixture. Designed for switching and dimming, 3-wire model is rated to 3 A/120 V and fits through ½ in. knockout. Also available, 2- and 3-wire PowerPlugs are designed for use with 18 AWG solid wires. Male-female construction passes UL1977 finger probe requirements.

PAM Fastening Technology    Charlotte, NC 28208
Nov 07, 2008 Able to work with all types of wood and aluminum covered material, Brevetti PRISMA MAXI provides low- to medium-volume frame shops with flexibility to accommodate moldings up to 7 x 3.25 in. Horizontal cutting stroke and other design features reduce blade vibration for smooth, consistent miter and precise cut. Rated at 200 cuts/hr, fully enclosed solution employs two 1½ hp, single-phase, 3,200 rpm motors and comes standard with 80-tooth, 275 mm saw blades featuring 32 mm bore.

Aeroflex/Weinschel, Inc.    Frederick, MD 21703
Nov 07, 2008 With Layer 1, Layer 2, and higher-layer test features, TM500 TD-LTE generates detailed diagnostic data for radio modem, enabling engineers to verify required functionality and optimize network operation and performance. It supports MIMO, handover testing, 20 MHz channel bandwidths, and 150 Mbit/sec downlink data rates, and offers comprehensive development and test support of base station and network infrastructure for next generation of Chinese mobile technology.

PennEngineering® (Penn Engineering)    Danboro, PA 18916
Nov 07, 2008 Allowing attachment of 2 thin metal parts in applications requiring repeatable pivoting or hinging action, PEM® SpotFast® Fasteners permanently join 2 metal components to create flush-attachment connection without protrusions on either side. They can join dissimilar metals or sheets with different thicknesses and install in steel or aluminum sheets as thin as .031 in. with hardness of 80 or less on Rockwell B scale. RoHS-compliant units are available in various diameters and sizes.

Avalue Technology Inc.    Chung Ho City, Taipei   Taiwan
Nov 07, 2008 Models EAX-Q35 and ERX-Q35 are powered by LGA775 Intel® Core(TM)2 Quad processor with 800/1066/1333 MHz front side bus, and feature four 240-pin DDR2 DIMM sockets, integrated Intel® Graphics Media Accelerator 3100, and PCI Express x16 slot. EAX-Q35 has Realtek ALC888 that supports 5.1 + 2-CH dual audio streams, while ERX-Q35 features Realtek® ALC888 with support for 7.1-CH multiple audio streams. Applications include gaming, kiosk, print imaging, digital video recorder, and network security.