Active Safety    Murray, UT 84107
Dec 05, 2008 Featuring clear and mirrored acrylic design, Eco-Clear 2003 utilizes environmentally friendly formulation of strontium aluminate crystals as power source instead of electricity or radioactivity. Sign works by absorbing ambient light during normal operations and then using stored energy to glow brightly and designate exit routes in emergency. Available in all mounting configurations, Eco-Clear 2003 is listed to UL 924 standard and compliant to IBC, NFPA, and UFC building codes.

Laser Photonics, Inc.    Lake Mary, FL 32746
Dec 05, 2008 Capable of stand-alone or in-line operation, FiberTower XP incorporates 20 W continuous wave laser, industrial PC controller, power supply, marking software, laser safety enclosure, and optional auto label feeder. Latter, which can also be removed for standard direct part marking, helps transform label marking process from series of manual operations into streamlined, laser-driven, automated process. Label perimeter is also cut using laser, enabling peel-and-stick application.

Extech Instruments Corp.    Nashua, NH 03063
Dec 05, 2008 Powered by 7.4 V, 2200 mAh Li-Ion battery, Apex 3 is equipped with 32-bit ARM 7 microcontroller and flash-based CPU that contains firmware, resident fonts, and rotated fonts, as well as downloadable fonts, graphics, logos, and barcodes. Unit incorporates 4 MB Flash and 2 MB SRAM memory that is under direct user control. Additional features include Short Range Bluetooth(TM) and Windows-based Form Fiesta utility that lets user create forms such as boarding passes and parking tickets.

Microstar Laboratories, Inc.    Bellevue, WA 98004-3039
Dec 05, 2008 MSXB 086 Isolated Input Signal Interface (SI) Module provides isolated analog inputs for DAP systems and enables data acquisition from 16 4-20 mA current loops for real-time processing or later analysis. Each board is calibrated for current inputs. It fits in backplane of industrial enclosure and connects to Data Acquisition Processor (DAP) board.

Z-Communications, Inc.    San Diego, CA 92126
Dec 05, 2008 Operating from 1,748-1,753 MHz with tuning voltage range of 0.5-4.5 Vdc, ZRO1751B1LF has typical phase noise of -119 dBc/Hz @ 10 kHz offset and typical tuning sensitivity of 8 MHz/V. It delivers typical output power of 8 dBm at 8 Vdc supply while drawing 33 mA (typ) over -15 to +65°C range. RoHS-compliant VCO (Voltage-Controlled Oscillator) features typical second harmonic suppression of -30 dBc and comes in 0.5 x 0.5 x 0.22 in. MINI-16-SM package.

Z-Communications, Inc.    San Diego, CA 92126
Dec 05, 2008 Operating from 5,090-5,110 MHz with tuning voltage range of 0.5-4.5 Vdc, C-band Model CRO5100Z features typical phase noise of -104 dBc/Hz at 10 kHz offset and tuning sensitivity of 20 MHz/V. Unit delivers typical output power of 3 dBm at 5 Vdc supply while drawing 118 mA over temperature range of 0-85°C. Housed in 0.63 x 0.866 x 0.22 in. package, voltage controlled oscillator is suited for microwave radio applications.

Creform Corp.    Greer, SC 29652-0830
Dec 05, 2008 Suited for long, heavy, and awkward size container handling, Crate Cart enables manual transfer through tight aisle ways and limited space areas. Unit features 1,500 lb load bearing capacity and has overall dimensions of 155 x 31 x 16 in. Designed to withstand rigors of loading via forklift, modular cart is constructed with plastic-coated steel pipes, cross bracing throughout length, and 6 large diameter swivel casters.

Spiroflow Systems, Inc.    Monroe, NC 28110
Dec 05, 2008 Spiroflow Mobile Flexible Screw Conveyor can be used to meter bulk ingredients and/or minor additives from storage or processes of any kind. Compatible with range of materials, particle sizes, and bulk densities, it can be controlled volumetrically or gravimetrically from source vessel or by gain-in-weight at receiving end. Only moving part is one motor-driven spiral that rotates within sealed tube to gently move material without degradation or risk of mixed product separation.

Advance Lifts, Inc.    St. Charles, IL 60174
Dec 05, 2008 Available in variable platform sizes and capacities, T-50608 Pit-Mounted Dock Lifts feature continuous-duty remote power units and UL approved electrical controllers. Units are suited for retail stores, schools, hospitals, and any location that must load or unload variety of vehicles with varying truck bed heights.

Rofin-Baasel Inc.    Boxborough, MA 01719
Dec 05, 2008 CUBE can integrate range of laser sources - solid-state, fiber, or diode - with array of focusing optics and axes, delivering configurability for various marking applications. Equally suited for production environments or research labs, workstation provides non-contact, abrasion-resistant, permanent laser marking onto various types of material with consistent results. It can generate alpha-numeric content, vector or rastered graphics, bar codes, or data matrix codes.

Anti-Seize Technology Industries, Inc.    Franklin Park, IL 60131
Dec 05, 2008 Formulated to thick paste consistency, TFE Pipe Thread Sealant fills thread imperfections and provides leak-proof joints that seal for life of connection. Non-hardening product contains no solvents, seals immediately, and prevents corrosion, seizing, and galling. Designed to withstand temperatures to 500°F and liquid pressures to 10,000 psi, sealant is suitable for all pipe threads made of cast iron, malleable, brass, copper, and stainless steel.

Ideal Industries, Inc.    Sycamore, IL 60178
Dec 05, 2008 Telco BigFoot(TM) ratcheting cable cutter lets datacom installers cut up to 2700 pair telephone cable or thick Stalpath® type communications cable with minimal stress on their hands and forearms. Use requires contractor to plant unit's over-molded boot on ground and push down on other handle; tool's mechanical leverage cuts cable instead of muscular force. Rounded, hardened steel blades with 5-tooth ratchet action hold cable tight for minimal distortion.

MadgeTech    Warner, NH 03278
Dec 05, 2008 Available in ±5 and ±50 ranges, self-contained SVR101 records accelerations for spectral analysis of vibration and peaks. It specifically records and time-tags X/Y/Z axis vibrations and peaks to provide history of shock and vibration conditions. To maximize memory use, unit only takes data when user preset trigger level is exceeded; min sampling rate is 2 sec. Real-time spectral data is measured and computed using FFT (Fast Fourier Transform) from 0-128 Hz.

Mastercam/CNC Software, Inc.    Tolland, CT 06084
Dec 05, 2008 With Feature-Based machining, Mastercam X3 Mill delivers way to automatically mill and drill solid model parts. FBM evaluates part's features, automatically designs effective machining strategy, and can detect solid machining features for pocketing, contouring, and drilling routines. Both Port5ax and Flow5ax toolpaths include feature that allows overlap/blend to be added at beginning and end of toolpath. In addition, X3 package brings Mastercam toolpaths directly into SolidWorks.

Megger    Dallas, TX 75237
Dec 05, 2008 PowerDB acceptance and maintenance test data management software helps generate reports in consistent format for tests of varying types. Capabilities cover automating tests, generating reports using 200+ built-in industry-standard report forms, and producing customized reports. Along with test results, software stores detailed information about each location and job in searchable database. Stored data can be analyzed to reveal trends, and results can be synchronized/exported.

Siemens Energy & Automation, Inc.    Alpharetta, GA 30005
Dec 05, 2008 Rated at 24 Vdc/10 A, SITOP Wall Mount Power Supply is built with heavy-duty components that are securely mounted with high temperature resistant silicon glue. Unit's heat sink is mounted on housing with clip for added strength. Because power supply is wall mounted, there is no danger from spring effect of DIN rail clip. Unit is suitable for use in mining, marine, and transportation industries.

HMS Industrial Networks, Inc.    Chicago, IL 60607
Dec 05, 2008 Anybus® RemoteCom(TM) features internal web server allowing remote access to device data, such as logged data and trend graphs. When predefined events are triggered, it notifies remote supervisors via SMS, email, or SNMP. Unit connects to devices that have serial Modbus-RTU or Ethernet Modbus-TCP interface and can also connect to external GPS receiver for geo-tracking mobile equipment. System is available in DIN-rail-mountable, IP20-rated plastic housing or in rugged metal housing.

LEVITON    Melville, NY 11747
Dec 05, 2008 Hospital Grade (HG) duplex receptacles, constructed without ferrous materials, may be used in MRI rooms of hospitals, health care facilities, medical buildings, imaging centers and other environments where high-magnetic fields are present. Available in 15 and 20 A, 125 V versions, products feature impact-resistant thermoplastic nylon covers and bodies. Smooth face resists dirt and dust, while triple-wipe brass T contacts provide optimal contact and conductivity.

LEVITON    Melville, NY 11747
Dec 05, 2008 Supplied in SmartLockPRO® GFCI and Decora® versions, Lev-Lok(TM) Modular Receptacles are available with snap-in, right-angle wiring module (MSTWL-A), available in solid and stranded No. 12 THHN wire, that conserves space in tight electrical outlet boxes. Wires exit from side of module, facilitating installation and replacement. Design suits applications where multiple feed-through circuits are involved. Lev-Lok system consists of wiring module and duplex receptacle.

Niton UK    oodmancott, Winchester   United Kingdom
Dec 05, 2008 Utilizing GOLDD(TM) geometrically optimized large area drift detector technology, Niton XLT3t Analyzers can detect aluminum, silicon, phosphorus, and sulphur without helium or vacuum purging. All are supplied with NDR software, which lets user generate custom reports, print certificates of analysis, and remotely monitor and operate instrument from PC or PDA. Integrated USB and Bluetooth(TM) communications provide direct data transfer to PC or networked storage device.