Calex Mfg. Co., Inc.    Concord, CA 94520
Nov 03, 2011 Housed in 2.65 x 4.2 x 1.0 in. encapsulated package, QCM Series offers input ranges of 18-36 and 36-75 Vdc with 3.3, 5, 12, 15, and 24 Vdc output options. Units feature input to output isolation and switching frequency of 360 kHz. For battery powered applications, all models offer ON/OFF with idle current in OFF state of 6 mA. Operating from -40 to +100°C, converters include over-voltage protection, pulse by pulse current limiting, over-temperature protection, and dead short current limiting.

Binder-USA, LP    Camarillo, CA 93012
Nov 03, 2011 Panel-mounted Series 713, 763, 715, and 766 can be rotated during installation to allow right-angle cordset to connect in desired angular position. While A-coded connectors are available with 4, 5, 8, or 12 gold-plated contacts, B-coded connectors are offered with 4 or 5. Male and female versions, as well as those prewired with 200 mm wires, are available. When fully connected to mating parts, connectors are IP67/IP68 rated. A-coded receptacles feature nickel-plated die-cast zinc housing.

Harrington Hoists, Inc.    Manheim, PA 17545 1754
Nov 03, 2011 Featuring lifetime-lubricated gear box and adjustment-free electromagnetic brake, RHN Series includes 2 dual-speed configurations: 2-20 metric ton Deck/Base Mounted hoist, and 2-15 metric ton Ultra-Low Headroom trolley hoist. Maintenance is facilitated by rope without special fittings, cast iron rope guide, and accessible controls. Additional features include heavy-duty, fan-cooled motor; adjustable geared limit switch; load limiter; and motor management device with count hour meter.

Kennametal, Inc.    Latrobe, PA 15650-0231
Nov 03, 2011 Spindle connection, KM4X(TM), delivers combination of clamping force and controlled interference levels that lends to robust connection, stiffness, and restrained bending moment. In turn, this helps machining centers increase speeds and feeds in difficult titanium machining applications. Ability to retrofit to existing machine tool offers advantage of increasing throughput without investment in additional capital equipment.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Nov 03, 2011 For roughing, semi-finishing, and finishing, CoroMill 176 covers gear profile sizes from 4-6. With standard carbide inserts for gear profiles according to DIN3972-2, tool is custom-made for specific profiles with addendum modification and protuberance. CoroMill 176 is registered as Quality class B in accordance with DIN3968 and uses iLock interface for precision and stability.

Larson Electronics, LLC    Kemp, TX 75143
Nov 03, 2011 Rated for wet areas and approved for Class 1 Division 2 hazardous locations, Model EPL-PM-2X400MH-100 has dual metal halide lamps, rated at 400 W each, producing total of 72,000 lumens and illuminating 50,000 ft² of workspace. Lamp housings, constructed of non-sparking aluminum with powder coat finish, have hinged tempered glass doors for re-lamping. Additional features include 100 ft of SOOW abrasive- and oil-resistant cord and integral ballasts that allow 120-277 Vac operation.

Larson Electronics, LLC    Kemp, TX 75143
Nov 03, 2011 Measuring 14 in. L x 3 ¼ in. D, Model EPL-FL26-LED-100 produces 400 lumens while using 5 W of power. Portable unit has non-sparking aluminum housing with molded bumper guards, annealed glass tube shield, and integral lamp shock absorbers. Internal LED driver circuitry automatically senses and adjusts incoming voltage, allowing lamp to run off variety of voltages from 120-277 Vac. Equipped with 100 ft of explosionproof cord, lamp has integral mounting hook for hands-free operation.

Honeywell Sensing and Control    Golden Valley, MN 55422
Nov 03, 2011 Delivering ±0.1% BFSL (Best Fit Straight Line) accuracy, Model 425 enables operators to monitor downhole drilling conditions and detect pressure spikes, which promotes accelerated adjustments and control. Model 427, with free flow sensing port @ ±0.2% BFSL, has wider aperture design with rounded edges allowing seamless flow of more viscous media through critical sensing area. This reduces clogging and buildup while providing consistent and accurate pressure measurements.

Tingley Rubber    South Plainfield, NJ 07080
Nov 03, 2011 Featuring 100% waterproof design, Winter-Tuff Overshoes have 46 rust- and corrosion-resistant tungsten carbide studs that provide slip resistance on ice and packed snow surfaces. Shoes are constructed with seamless molded upper, abrasion-resistant sole, and high stretch rubber formulation that stays extremely flexible in cold temperatures. They are suited for any job where winter weather conditions can create slip and fall hazard.

Tingley Rubber    South Plainfield, NJ 07080
Nov 03, 2011 Used during work or recreation, 100% waterproof StormFlex® is available in black, is made from stretchy, lightweight fabric and features heat sealed seams. Jacket also features zipper storm fly front, roll-a-way hood in collar design, 2 oversized cargo pockets, hook and loop take-up straps at sleeve cuffs, as well as tapered sweep and adjustable drawcord. Pants feature elastic waist with drawcord, side pass through openings with flap closures, and take-up straps at ankle cuffs.

TDK-Lambda Americas Inc.    San Diego, CA 92154
Nov 03, 2011 Supplied in 9.49 x 1.70 x 1.36 in. Lexan 920 plastic cases, AL60-100 series is comprised of AC/DC power supplies with 60, 80, and 100 W output ratings. Constant-voltage models are available with 12, 24, or 36 V outputs, and constant-current units provide 1-4 A with DC outputs from 6-48 V. Operating with universal power inputs from 90-305 Vac, all products are convection cooled, operate from -30 to +70°C, and include PFC. Typical output efficiencies are 85%-90% under full load.

Carver, Inc.    Wabash, IN 46992 0544
Nov 03, 2011 Available with heated and/or cooled platen packages, AutoFour/48 Press offers 3 platen sizes: 15 x 15 and 18 x 18 in. for general purpose applications, and 19 x 19 in. for ASTM D3182 rubber test slab preparation. Floor-standing press has max operating temperature of 650°F, adjustable daylight of 0-15 in., and 4 in. stroke. Other features include self-contained hydraulic system, programmable control system with touchscreen interface, and 2 anti-tie-down close buttons for operator safety.

Oberon, Inc    State College, PA 16801
Nov 03, 2011 Intended for installation in air-handling space, 2 ft x 2 ft x 2.6 in. Model 1059-MIMO is designed for mounting Extreme Networks' Altitude 4620 dual radio 802.11n access point with connectors. Secure, plenum-rated, suspended ceiling-mounted enclosure promotes optimal radio frequency coverage. Mounting features on door allow attachment of 2 dual band MIMO antennas, and locking doors provide physical security to help meet guidelines in government and retail environments.

Kaba Ilco Corp.    Winston-Salem, NC 27105
Nov 03, 2011 Available with cylindrical, mortise, and exit trim options, E-Plex 2000 Series PowerStar(TM) version features integrated technology that powers lock with each rotation of lever. Three through bolts secure lock to door. Using E-Plex Standard Software, users can access lock's last 1,000 audit events, including use of mechanical override feature, to find out who was in specific area at exact time. Other programmable features include, passage, lockout, tamper shutdown, and service codes.

iDatix Corporation    Clearwater,, FL 33760
Nov 03, 2011 Able to integrate with other programs, iSynergy v4.0 delivers cross browser capabilities and optimized workflow. It is configured to fully function on devices such as iPhone and iPad and offers Web-based interface that may be accessed via any internet-connected browser. Along with rule based restrictions that promote document protection, solution offers customizable permissions for granting clients specific access. Light version accelerates searches, editing, and indexing.

Klus LLC    Vero Beach, FL 32960
Nov 03, 2011 By acting as connector between light source and application area, LED extrusion maximizes uses available for LED light strips (LED profiles or LED aluminum channels). Waterproof extrusions, available diverse shapes and sizes, eliminate obstacles related to LED light strip mounting by standardizing mounting techniques of LED ribbon light. They can be custom designed to suit specific commercial and residential applications.

Apelon, Inc.    Ridgefield, CT 06877
Nov 03, 2011 TermManager® code set management and collaborative mapping application supports healthcare data interoperability initiatives by enabling access to national healthcare vocabulary standards. As cloud-based solution, it can be accessed by anyone with web browser to manage sets of local terms and map them to national data standards. Up-to-date mappings are ensured via TermWorks matching technology, and role-based access control is available for review and approval.

Gemini Systems    New York, NY 10006
Nov 03, 2011 Xtreme DataHub provides end users with ability to run reports and analytics while removing burden of data movement and preparation from database administrators. Organizations can manage and leverage multiple data warehousing and data analytics appliances from IBM Netezza and other appliance vendors, relational databases, Hadoop Distributed File System, and flat files. Furthermore, point-and-click interface conserves time for database administrators.

GOEPEL electronics LLC    Austin, TX 78759
Nov 03, 2011 With LAN server feature, SCANFLEX® utilizes preconfigured GBit LAN interface for high-speed transfer of large Flash images for in-system programming without additional components. SCANFLEX® provides GBit interface by BAC9305-LAN1G Bus Access Cable, supporting functional tests as well as data transfer. In connection with VarioTAP® technology for processor emulation, users can combine benefits of JTAG-based target initialization with efficiency of high-speed Flash image downloads.

Ceragon Networks, Inc.    Paramus, NJ 07652
Nov 03, 2011 Designed to provide up to 4 Gbps of traffic and support up to 4 carriers in single rack unit, FibeAir® IP-10Q meets needs of Ethernet and IP/MPLS aggregation networks. Traffic optimization and frame cut-through technology optimize operation, while no single point of failure (SPoF) design enables operators to meet subscriber SLA requirements. Built for 3G, 4G/LTE, converged, and private networks, solution is optimized for migration from SONET/SDH aggregation networks to packet networks.