Honeywell International, Inc.    Morristown, NJ 07960
Nov 04, 2011 Integrated within Experion® Process Knowledge System sustainable industrial control platform, MeterSuite(TM) provides liquid and gas flow calculation to promote cost efficiency, lifecycle support, and control. Customers can carry out all types of metering using common and supportable platform without customized hardware/engineering. Dual-tiered solution links directly to facility's distributed control system and uses single database, miniimzing maintenance.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Nov 04, 2011 With Netezza Network Analytical Accelerator, communications service providers can analyze petabytes of customer and network data to gain insights into customer experience, secure new customers, and track overall health of network. CSPs can analyze calling plans and contract terms to see which are driving revenue, and understand how each customer is using voice and data packages. Appliance also helps prevent network disruptions, create targeted marketing programs, and further monetize data.

Invensys Process Systems    London SW1E 5BF  United Kingdom
Nov 04, 2011 Incorporating 4 refinery process models, SimSci-Esscor ROMeo v6.0 simulates and optimizes reforming, coking, isomerization, and visbreaking units. Integrated online and offline optimization solution handles equipment monitoring, utilities optimization, and material balance in open- and closed-loop mode. It can use or be used with any application that communicates via OPC-UA, including other SimSci-Esscor simulation software applications like PRO/II and DYNSIM.

B&W Tek, Inc.    Newark, DE 19713
Nov 04, 2011 Intended for materials identification and verification within cGMP compliant facilities, NanoRam(TM) enables on-the-spot analysis with no need for quarantine areas. Unit features highly selective peaks for both qualitative and quantitative analysis, and has ability to analyze organic and inorganic compounds. NanoRam supports development of standardized and validated methods to facilitate 100% inspection for purity and quality, as mandated by government regulators.

CAE Services Corporation    Batavia, IL 60510
Nov 03, 2011 Intended for injection molding applications, Mold-Vac 20,000 helps eliminate part burns, voids, and short shots due to entrapped air and gas. System's blowback feature cleans and purges vented ejector and core pins after every cycle. Mold-Vac 20,000 is suitable for complex, high cavitation molds, typically characterized by fill times of less than 1 second.

SAS Automation, Ltd.    Xenia, OH 45385
Nov 03, 2011 SAS Automation tool changers facilitate and accelerate mounting of EOAT (end-of-arm tooling) and gripper systems to robot arm by automatically connecting multiple ports, including air, vacuum, and electric. Robot side (QSR) is permanently attached to robot arm, and tool side (QST) is permanently attached to each individual EOAT. EOAT mounts to robot by fitting 2 sides together and then locking them into position.

Thermo Fisher Scientific, Air Quality Instruments    Franklin, MA 02038
Nov 03, 2011 Available in 0.5 and 1.0 mL sizes, Matrix Amber 2D barcoded tubes are composed of Virgin Class IV Medical Grade Polypropylene and feature permanently etched unique barcode. Amber color protects against effects of UV light while allowing users to gauge liquid levels inside tube. Standard red caps prevent auto-luminescence and minimize light penetration. All sterile, DNase/RNase-free tubes are compatible with 2D barcode readers, handheld de-cappers, freezer racks, and automated instruments.

J. W. Winco, Inc.    New Berlin, WI 53151
Nov 03, 2011 Available in metric sizes with tapped hole or threaded stud, Series GN 608.5 is suitable for applications that require surface mounting. Plunger pin is made of nickel-plated stainless steel, while mounting plate is stainless steel. Fabricated from matte black, glass fiber reinforced nylon plastic, knob is not removable. Plungers are non lock-out types and are RoHS-compliant.

K-Tool International    Wixom, MI 48393
Nov 03, 2011 Equipped with 11 A, 120 Vac, 60 Hz motor, 7 in. Polisher/Sander enables user to set maximum speeds from 1,000-3,000 rpm for different applications. Multi-position handle is suited for left- or right-handed users or can be positioned directly on top of unit. Supplied with 7 in. rubber polishing pad, 7 in. hook and loop sanding pad, and wool bonnet, tool includes soft start feature to prevent scratching or marring during polishing or sanding procedures.

Micro-Epsilon UK Ltd    Cheshire   United Kingdom
Nov 03, 2011 Designed to inspect LEDs for function, contrast, and luminosity, colorCONTROL MFA-5 can verify up to 5 LEDs simultaneously. Light from target object is transmitted to inspection system via 2 mm diameter, plastic optical fiber and is evaluated dynamically using color sensor. Color value, which is determined within milliseconds, is output as RGB, HIS, or CIE values and transmitted via USB or RS232 interface at 9,600-115,200 baud to higher level inspection system.

Calex Mfg. Co., Inc.    Concord, CA 94520
Nov 03, 2011 Housed in 2.65 x 4.2 x 1.0 in. encapsulated package, QCM Series offers input ranges of 18-36 and 36-75 Vdc with 3.3, 5, 12, 15, and 24 Vdc output options. Units feature input to output isolation and switching frequency of 360 kHz. For battery powered applications, all models offer ON/OFF with idle current in OFF state of 6 mA. Operating from -40 to +100°C, converters include over-voltage protection, pulse by pulse current limiting, over-temperature protection, and dead short current limiting.

Binder-USA, LP    Camarillo, CA 93012
Nov 03, 2011 Panel-mounted Series 713, 763, 715, and 766 can be rotated during installation to allow right-angle cordset to connect in desired angular position. While A-coded connectors are available with 4, 5, 8, or 12 gold-plated contacts, B-coded connectors are offered with 4 or 5. Male and female versions, as well as those prewired with 200 mm wires, are available. When fully connected to mating parts, connectors are IP67/IP68 rated. A-coded receptacles feature nickel-plated die-cast zinc housing.

Harrington Hoists, Inc.    Manheim, PA 17545 1754
Nov 03, 2011 Featuring lifetime-lubricated gear box and adjustment-free electromagnetic brake, RHN Series includes 2 dual-speed configurations: 2-20 metric ton Deck/Base Mounted hoist, and 2-15 metric ton Ultra-Low Headroom trolley hoist. Maintenance is facilitated by rope without special fittings, cast iron rope guide, and accessible controls. Additional features include heavy-duty, fan-cooled motor; adjustable geared limit switch; load limiter; and motor management device with count hour meter.

Kennametal, Inc.    Latrobe, PA 15650-0231
Nov 03, 2011 Spindle connection, KM4X(TM), delivers combination of clamping force and controlled interference levels that lends to robust connection, stiffness, and restrained bending moment. In turn, this helps machining centers increase speeds and feeds in difficult titanium machining applications. Ability to retrofit to existing machine tool offers advantage of increasing throughput without investment in additional capital equipment.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Nov 03, 2011 For roughing, semi-finishing, and finishing, CoroMill 176 covers gear profile sizes from 4-6. With standard carbide inserts for gear profiles according to DIN3972-2, tool is custom-made for specific profiles with addendum modification and protuberance. CoroMill 176 is registered as Quality class B in accordance with DIN3968 and uses iLock interface for precision and stability.

Larson Electronics, LLC    Kemp, TX 75143
Nov 03, 2011 Rated for wet areas and approved for Class 1 Division 2 hazardous locations, Model EPL-PM-2X400MH-100 has dual metal halide lamps, rated at 400 W each, producing total of 72,000 lumens and illuminating 50,000 ft² of workspace. Lamp housings, constructed of non-sparking aluminum with powder coat finish, have hinged tempered glass doors for re-lamping. Additional features include 100 ft of SOOW abrasive- and oil-resistant cord and integral ballasts that allow 120-277 Vac operation.

Larson Electronics, LLC    Kemp, TX 75143
Nov 03, 2011 Measuring 14 in. L x 3 ¼ in. D, Model EPL-FL26-LED-100 produces 400 lumens while using 5 W of power. Portable unit has non-sparking aluminum housing with molded bumper guards, annealed glass tube shield, and integral lamp shock absorbers. Internal LED driver circuitry automatically senses and adjusts incoming voltage, allowing lamp to run off variety of voltages from 120-277 Vac. Equipped with 100 ft of explosionproof cord, lamp has integral mounting hook for hands-free operation.

Honeywell Sensing and Control    Golden Valley, MN 55422
Nov 03, 2011 Delivering ±0.1% BFSL (Best Fit Straight Line) accuracy, Model 425 enables operators to monitor downhole drilling conditions and detect pressure spikes, which promotes accelerated adjustments and control. Model 427, with free flow sensing port @ ±0.2% BFSL, has wider aperture design with rounded edges allowing seamless flow of more viscous media through critical sensing area. This reduces clogging and buildup while providing consistent and accurate pressure measurements.

Tingley Rubber    South Plainfield, NJ 07080
Nov 03, 2011 Featuring 100% waterproof design, Winter-Tuff Overshoes have 46 rust- and corrosion-resistant tungsten carbide studs that provide slip resistance on ice and packed snow surfaces. Shoes are constructed with seamless molded upper, abrasion-resistant sole, and high stretch rubber formulation that stays extremely flexible in cold temperatures. They are suited for any job where winter weather conditions can create slip and fall hazard.

Tingley Rubber    South Plainfield, NJ 07080
Nov 03, 2011 Used during work or recreation, 100% waterproof StormFlex® is available in black, is made from stretchy, lightweight fabric and features heat sealed seams. Jacket also features zipper storm fly front, roll-a-way hood in collar design, 2 oversized cargo pockets, hook and loop take-up straps at sleeve cuffs, as well as tapered sweep and adjustable drawcord. Pants feature elastic waist with drawcord, side pass through openings with flap closures, and take-up straps at ankle cuffs.