AAEON Technology Inc    Taipei   Taiwan
Jan 05, 2009 Built upon AMD Geode(TM) LX800 processor and AMD CS5536 I/O chip, Model PFM-541I offers up to 256 Mb onboard DDR333 system memory, two 10/100Base-TX Ethernet ports, 4 USB 2.0 ports, 4 COM ports, and PC/104 expansion. Storage needs are met by both IDE and CompactFlash(TM) interfaces. Available in temperature ranges of -25 to 70°C and -40 to 80°C, module is suited for harsh environments.

Baumer Ltd.    Southington, CT 06489 1534
Jan 05, 2009 Suited for harsh environments, VeriSens® Smart Vision Sensors feature shatterproof glass as well as special connectors and seals that protect against damage during washdown. FEX processor that calculates edges eliminates data detection problems associated with changes in environmental conditions. Equipped with 656 x 494 pixel CCD image sensors, units calculate 2-D position correction, provide data on position and angle of target, and perform measurement and location calculations.

Robert Bosch GmbH      Germany
Jan 05, 2009 FlexiDome camera series is offered with 9-22 mm varifocal lens, which provides wide-area coverage up to 31.2° horizontal and 22.8° vertical as well as telephoto coverage up to 12.8° horizontal and 9.6° vertical. These characteristics enable surveillance system operators to identify person positioned up to 40 m away from camera. Available for analog and FlexiDome IP cameras, this IR-corrected lens keeps day/night cameras in focus at all times and has f-stop of f/1.4.

Maplesoft    Waterloo, Ontario   Canada
Jan 05, 2009 Leveraging Maple(TM) computation engine, MapleSim(TM) multi-domain modeling and simulation tool provides physical modeling techniques that let users create system diagram. Model equations are automatically generated, and drag-and-drop modules can be calibrated to individual preferences. Application of symbolic preprocessing techniques to model equations accelerates code running for complex models, and multiple tools are supplied for dynamic analysis, control design, and optimization.

Gems Sensors Inc.    Plainville, CT 06062
Jan 05, 2009 Designed for drinking water and beverage dispensing applications, FT-330 Hall effect turbine flow sensor is constructed with over-molded electronics and plastic design that allows for multiple mounting positions. Its 316 SS shaft, coupled with Delrin® bearings, promotes accurate measurement and accelerated dispensing cycles in temperatures up to 176°F. Customizable for any application, sensor suits OEMs who require NSF-approved and PPO-reinforced materials.

Anver Corp. - Anver.Com    Hudson, MA 01749
Jan 05, 2009 Designed to handle porous blocks and construction materials weighing up to 4,000 lb, VPE-1 below-the-hook, self-contained vacuum lifter is constructed with all-welded steel frame. It incorporates electric vacuum power station, oversize vacuum pump with foam sealed-ring suction pad, remote pendant, and ergonomic handle. Parking stands protect foam sealing ring suction pad when not in use, and safety features include VacGuard(TM) control system with vacuum reservoir and leakage alarms.

Stafford Manufacturing Corporation    North Reading, MA 01864-0277
Jan 05, 2009 Suited for prototyping and repairs, Remachineable Shaft Collar Kits feature eight 1- or 2-piece fully assembled steel collars per kit, and each has pilot hole that can be machined by user to match their own bore requirements. Sizes range from 1 1/8 to 3 in. OD with 0.235 in. pilot hole for bore. Applications include building new machinery as well as maintenance for fabricating custom sizes to match worn or replacement shafts.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Jan 05, 2009 With 300°F max temperature rating and direct drive capacities to 3,400 cfm, CUD Direct Drive Upblast Exhaust Fans can discharge contaminated air directly away from roof or wall surfaces. Products feature weather-resistant, spun aluminum housing and are offered in single- and 3-phase voltages. Elements of construction include backward inclined, non-overloading wheels; aluminum blades and inlets; and fully enclosed drive compartment.

Supertex Inc.    Sunnyvale, CA 94619
Jan 05, 2009 Available in 8-lead DFN package, RoHS-compliant HV9919 pulse-width managed (PWM) controller IC is designed to drive LEDs using buck topology in various solid-state lighting applications. Hysteretic control function maintains output current between fixed Min and Max level at all times, ensuring LED current will not change despite surges in input conditions. PWM circuitry provides true constant color and dimming capability, which is programmable via one capacitor.

GAO Tek Inc.    Toronto M1B2K4  Canada
Jan 05, 2009 Supporting 10/100 M half/full duplex modes, Model GAO RB-V35 can transfer data point-to-point from V.35 channels to RJ-45 interfaces and can be used as extension or divide in LANs with bit rate base structures. Unit operates on 110/220 Vac ±20% or -48 Vdc ±20% power supply and includes self-test function that supports simulation and digital loop.

Carlo GAVAZZI Automation Components    Buffalo Grove, IL 60089
Jan 05, 2009 Offered in 4 frame sizes, GC Series Contactors range from 25-140 A and up to 75 hp at 460 Vac. Units are available with wide selection of AC and DC coil voltages, choice of screw or lug terminals, dual coil terminals, and at least one auxiliary contact. Providing class 10 trip protection for motor loads, matching GT Series Bimetallic Overloads include set of auxiliary contacts, test button and manual or automatic reset, and direct mounting or optional separate mounting bracket.

TURCK, Inc.    Plymouth, MN 55441
Jan 05, 2009 Using I/Oassistant software for configuration, parameter setup, documentation, commissioning, and diagnostics, BL20 DeviceNet Gateway accepts up to 32 I/O modules, resulting in system that can handle up to 512 digital I/O points or 128 analog I/O points. Gateway is compatible with TURCK's BL20 slices, including motor starter modules with SWIRE communication technology. SWIRE consists of single I/O slice within BL20 node and uses ribbon cable media to daisy-chain to motor starters.

Delcam Plc    Birmingham Hampshir B10 0HJ  United Kingdom
Jan 05, 2009 Supporting 5-axis scanning with Renishaw's REVO probe, hardware-independent PowerINSPECT v5 enables verification of both geometric and free-form shapes on CMMs. Ability to use multiple alignments within single part allows independent verification of distinct areas within component. GD&T capability includes symmetry, surface profile and run-out, as well as previously available true position, perpendicularity, angularity, parallelism, and concentricity.

nLight Photonics    Vancouver, WA 98665
Jan 05, 2009 Manufactured using direct nanoparticle deposition active fiber production technology, LIEKKI(TM) large mode area all-erbium fibers are suited for high-power, eye-safe applications at 1.5+ µm. Characteristics include core absorptions of 60-120 dB/m @ 1,530 nm, numerical apertures of less than 0.10, cores of 20-70 µm, and claddings from 125-400 µm. Specific areas of use include LIDAR, range finding, sensing, medical, and directed energy applications.

ErgotecH, Inc.    Danbury, CT 06810
Jan 05, 2009 Bidirectional, vertically rotational work positioner provides operators with 360° infinitely variable, electronic regenerative speed rotation from 0-17 rpm and full work height adjustment activated by foot pedals. Control panel enables adjustment of rotational direction/speed, and mounting plate features multiple concentric bolt channels for tooling and parts. Handling work of up to 400 ft-lb, compact, portable unit also allows for safe rotation reversal.

Grupo Premo    Barcelona   Spain
Jan 05, 2009 Designed according to UL1283 and EN60939 regulations, DTRF series filters three-phase without neutral for currents of 20, 30, and 50 A. They feature plastic housings, no internal resins, and low leakage current. Compact filters suit applications including automation machinery, electro-medical equipment, frequency inverters and servo drives (with short length cables), switching power supplies, as well as applications with restrictive space requirements.

Grupo Premo    Barcelona   Spain
Jan 05, 2009 Based on low consumption Fluxgate Technology, Series DCT-200A measures DC, AC currents, with precision levels of 99.9% of linearity and 5 ppm of linear error. It offers wide band-width of up to 100 kHz, up to 200 A, and measures 52 x 52 x 37 mm. Featuring immunity to all kind of interferences, unit suits energy measurement systems, medical equipment, high stability inverters, and high power supply applications.

Grupo Premo    Barcelona   Spain
Jan 05, 2009 Including single and three phase versions, AIC Series high energy storage chokes offer operation frequency from 2.5-100 kVA with efficiency of up to 99%. Features include wide range of inductances, from 250-6 mH, with currents up to 150 A, operating frequency of up to 25 kHz, and inductance stability in high temperatures.

ITT Interconnect Solutions    Santa Ana, CA 92705
Jan 05, 2009 Designed for use in extreme weather conditions, PT connector caps are ribbed and feature arctic coupling nut to provide good grip when used with gloved hands and also feature ¼-turn locking with audible click. Caps are available in sizes 8-18 along with numerous cord lengths and fixing rings. Sizes 20-24 are also available upon request. Finishes include olive green cadmium and black/green zinc cobalt.

ITT Interconnect Solutions    Santa Ana, CA 92705
Jan 05, 2009 Pressure rated up to 5 psi, MIKQ IP68 Series of high density connectors are designed for use in tactical communication and control systems, imaging systems, and television camera equipment. They feature contact system that adheres to unique sealant material while maintaining 0.050 contact spacing. Housed in brass metal shell, 37-pin connectors have twist pin contact system with standard crimp contact wire terminations, crimped gold plated contacts, and push-pull coupling mechanism.