Littelfuse, Inc.    Des Plaines, IL 60016
May 15, 2008 SP03-6 Silicon Overvoltage Protection Array combines TVS device with diode rectifier bridge to provide longitudinal (common mode) and differential protection in one package, suppressing both positive and negative voltage surges. It has reverse standoff voltage of 6 V, and clamps surges to 15 V under 50 A surge current conditions (20 V at 100 A surge). Unit is designed for data lines and interface circuits in Ethernet, T3/E3, DS3, ADSL2+, and VDSL2+ systems.

Maxim Integrated Products    Sunnyvale, CA 94086
May 15, 2008 Optimized for direct digital synthesis of high-frequency and wideband signals in first Nyquist zone, MAX19693 12-bit converter can directly synthesize signals in frequency range from dc to nearly 2 GHz. It operates from 3.3 and 1.8 V supplies, and achieves SFDR of greater than 70 dBc for output frequencies less than 800 MHz and 62 dBc at output frequency of 1,500 MHz. At 4.0 Gsps update rate and output frequency of 200 MHz, unit offers wideband-noise spectral density of -164 dBm/Hz.

AXIOMTEK    Taipei   Taiwan
May 15, 2008 Enclosed in 11.02 x 5.91 x 2.64 in. aluminum housing, embedded computers eBOX630-821-FL and eBOX630-830-FL feature anti-vibration of 2 Grms with CF and 1 Grms with HDD, operating temperature from 0ºC to 50ºC with wide-temperature HDD, and fanless operation. Available with Windows® CE, Windows® XP Embedded, and Linux, computers are suited for industrial automation, digital signage, and vehicle applications.

AXIOMTEK    Taipei   Taiwan
May 15, 2008 Utilizing mobile Intel® 910GMLE Express chipset and I/O controller hub ICH6-M, Model SBC86822 low power Mini ITX motherboard offers DualView (LVDS LCD: 1,600 x 1,200 and CRT: 2,048 x 1,536) support. Onboard I/O features include dual Gigabit Ethernet, 6 COM ports, 8 USB 2.0 ports, audio, and digital I/O. Other features include socket 478 for Intel® Celeron® M processor with FSB 400 MHz, 2 SATA-150 IDE, 2 RJ-45 port, and 2 x 240-pin DDR2 DIMM sockets maximum up to 2 GB.

Linde AG    Munich 80807  Germany
May 15, 2008 LINSPRAY® Arcmix achieves deposit efficiency of more than 90%. By utilizing nitrogen mix, it reduces dust residue, and makes it possible to obtain precisely specified hardness, oxygen content, and bond strengths of sprayed coatings while lowering porosity levels. This allows coating process to be adapted for specific usage planned for part or material.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
May 15, 2008 The 8 A 8STH06FP and 8S2TH06FP, and 15 A 15STH06FP and 15S2TH06FP Hyperfast tandem rectifiers deliver reverse recovery time of 19 ns and 20 ns, respectively, which is combined with low forward voltage drop rating of 1.7 V at 8 A and 1.9 V at 15 A, allowing devices to work at higher frequencies, promoting system efficiency. Devices offer operating junction temperature of 175°C, are available in 2- and 3-pin TO-220 FULLPAK packages, and lead-free and RoHS-compliant.

Danaher Motion/Portescap    Radford, VA 24141
May 14, 2008 RoHS-compliant h3 Series incorporates enhancing magnets, inserted between each stator tooth, to optimize torque output across entire speed range. Supplied in aluminum housing for optimal heat dissipation, these 1.8° step motors feature Neodymium iron boron magnets as well as bearing retainer and o-ring. Larger bearings enable motor to handle higher side and radial loads. They are available in NEMA 17, 23, and 34 frame sizes, with various stack lengths available in each frame size.

Advantech Automation Corp.    Cincinnati, OH 45240
May 14, 2008 Designed for use with ADAM-5550 series PACs, ADAM-5081 features 2,500 Vdc isolation, high-speed frequency mode (5 Hz to 1 MHz), and counter code at 1 MHz. Digital filter eliminates noise and interference (1-65,000 µsec), ensuring accurate data collection and transmission, and 4 counter modes are available. Along with 4 digital output channels, solution offers frequency mode that supports up to 8 channels and can control range of electromagnetic wave status under certain conditions.

ON Semiconductor, LLC    Phoenix, AZ 85008
May 14, 2008 PureEdge(TM) NBXxxxx Series uses high Q fundamental mode crystal and analog phase lock loop multiplier to provide single or dual frequency, ultra low jitter and phase noise LVPECL/CML differential output. Units feature noise floor of -163 dBc/Hz at 10 MHz offset, and phase RMS jitter of 0.4 ps. Housed in 5.0 x 7.0 mm SMD package, oscillators are suited for 1x/2x Fibre Channel, SATA, iSCSI, PCIe, SONET/SDH, Ethernet, and clock margining applications.

Linear Technology Corp.    Milpitas, CA 95035
May 14, 2008 Housed in 2 x 2 mm DFN or ThinSOT package, constant-current Model LT3593 features high-side LED current sense topology that enables LED cathode to be connected directly to ground, creating single wire current source. Single digital control pin enables set-and-forget LED dimming with ratios as high as 32:1. Operating from input voltage of 2.7-5.5 V, device features 1 MHz constant switching frequency and can drive up to 10 white LEDs from single Li-Ion cell at efficiencies over 80%.

Phihong USA    Fremont, CA 94539
May 14, 2008 Delivering 33.6 W of power on single Ethernet port, Model POE36U provides fully compliant detection, disconnect, and voltage control. Adapter is Gigabit-compatible and incorporates diagnostic LEDs as well as overvoltage, over-current, and short-circuit protection. Featuring layer 1, 2 finger classification, device is suited for IP telephones, wireless network access points, Bluetooth access points, access controls, security cameras, IP print servers, and biometric sensors.

Hilscher North America Inc    Lisle, IL 60532
May 14, 2008 With surface area of 45 x 25 mm, netIC Communication Interface Module enables integration of real-time Ethernet end devices for automation technology such as control, drive, actuator, or sensor. It is possible to accommodate any 2 Ethernet connections for Profinet, PowerLINK, Ethernet IP, SERCOS III, EtherCAT, Modbus, and TCP/IP. Compatible with industry standard and plugged into existing IC socket in device, module includes integrated switch, hub, and 3.3 V power supply.

Walls & Forms Inc.    Dallas, TX 75374
May 14, 2008 Available in 3 standard sizes of 32 x 24, 24 x 24, and 24 x 8 in., Peg-Panel(TM) can be purchased in 100% molded plastic panel format for DIYers, or as finished peg-panel display. Unit features blank header for graphic placement and accepts all standard pegboard hardware. Measuring 1/8 in. thick, panel has ¼ in. diameter holes, 1 in. on center. Moisture-resistant board is virtually maintenance-free and will not chip, warp, break, rust, or absorb dirt or grease.

HighRes, Inc.    La Jolla, CA 92038
May 14, 2008 ReverseEngineering.com Pro/Engineer Wildfire 4 plug-in lets users capture data from existing parts while remaining directly within Wildfire environment. In order to create digitized datums, lines, splines, arcs, and circles, plug-in also includes UI that promotes end user work flow and supports switching digitizing between millimeters and inches. Align laser scan point clouds to PCMM coordinates feature is also included, as is ability to conceive complex sheet metal designs.

William Frick & Co.    Libertyville, IL 60048
May 14, 2008 Smartmark(TM) series offer reliable generation 2 passive solution for tracking all reusable packaging - totes, pallets, bulk containers - through every stage of supply chain. Offered in custom form factors with rapid prototyping available, weather-resistant products have ranges of 5-12 ft using hand-held readers (longer with fixed mount readers). Available designs include offset, impact- and temperature-resistant, fully encapsulated, and SnapAround(TM).

Kistler Instrument Corp.    Amherst, NY 14228 2119
May 14, 2008 Featuring digital charge amplifier in compact sensor housing, Type 9238 enables adjustment to processing operations. Sensor sensitivities can be programmed by ManuWare(TM) software, which matches sensor to signal conditioners or process monitors. Since transmitter measures force indirectly through proportional material strain, it can be located in accessible locations within manufacturing machinery. Single, IP67-rated cable offers resistance to production environments.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
May 14, 2008 Based on UNI/O(TM) memory-device protocol, 11XX010, 11XX020, 11XX040, 11XX080, and 11XX160 are 1, 2, 4, 8, and 16 Kbit EEPROMs that can track host MCU serial data rates from 10-100 kHz. Products come in 3-pin SOT-23 packages, which facilitates evaluation because their pin-outs overlay any standard IP2PC(TM) or SPI EEPROM socket. Additional features include status registers; software write protection for ¼, ½, or full array; noise filtering; and ESD protection.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
May 14, 2008 Supporting all Microchip serial EEPROM devices, single-board MPLAB® Starter Kit for Serial Memory Products (Part No. DV243003) obtains power from PC/laptop USB port and runs under MPLAB IDE to accelerate debugging and system integration. No additional power-supply connections are needed, and entire memory contents are displayed on screen for verification and editing. Kit also logs endurance cycles and stores memory contents in files for archiving and analysis.

Dwyer Instruments, Inc.    Michigan City, IN 46361
May 14, 2008 Activated upon receiving sufficient light, Series DRFT Solar Digital Refrigerator and Freezer Thermometer help monitor appliance temperature fluctuations to preserve and prevent spoilage of contents. NSF-approved products instantly show exact temperatures from -40 to +70°F on integrated LCD, and embedded switch lets user take readings in °F or °C. Measuring 4.5 x 1.1 x 0.6 in., solutions come in ABS case, utilize thermistor sensor, and offer accuracies to ±1C.

Schurter, Inc.    Santa Rosa, CA 95403
May 14, 2008 Providing universal EMC for high-frequency applications, Series 5150 possesses broadband suppression properties to 1 GHz and combines them with universal power input. It uses X2Y® filter technology, which combines X and Y capacitors into one component to eliminate leads connecting capacitors as well as minimize parasitic impedances. Double shielding between X2Y filter and filter casing, together with broad metal flange, can serve as alternative for feed-through and multi-stage filters.