Danaher Motion    Wood Dale, IL 60191-1073
Jan 05, 2009 Motion Programming Interface v4.0 has 64 bit features that enable engineers to apply sub-sampling by concentrating control performance on critical motors to reduce settling time. It delivers true 64-bit trajectory and filter calculations to achieve precise, smooth control of high resolution motors. Software can simultaneously command, control, and synchronize up to 64 devices such as motor amplifiers and I/O from variety of servo manufacturers.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Jan 05, 2009 XRP(TM) line of hammerdrill/drill/drivers include three 18 V models: DCD950KX, DCD950VX, and DCD940KX; three 14.4 V models: DCD930KX, DC930VX, and DCD920KX; and 12 V model DCD910KX. XRP(TM) Lithium Ion 18 V model, DCD970KL features Nano-Phosphate Lithium ion battery. Chucks in hammerdrill self-tighten throughout application to prevent bits from slipping. Drills are designed with all-steel transmission, and have metal gear case allowing transmission to dissipate heat and run cooler.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Jan 05, 2009 Model LM5085, LM25085, LM5088 and LM25088 offer programmable switching frequency up to 1 MHz using single resistor. Model LM5085 and LM25085 are P-channel MOSFET controllers that suit high-voltage step-down applications. N-channel MOSFET controllers, LM5088 and LM25088, feature emulated current-mode control PWM control topology to regulate output as low as 1.2 V. Model LM5085 and LM5088 operate from input of up to 75 V, while LM25085 and LM25088 have maximum input voltage of 42 V.

Ophir-Spiricon Inc.    Logan, UT 84321
Jan 05, 2009 With operating spectral range of 193 nm to 2.94 µm, PE50-DIF pyroelectric detector can measure repetition rates to 3,000 Hz with pulse widths of up to 30 µsec for short pulses, while for long pulses, it measures repetition rates to 250 Hz with pulse widths of up to 1 msec. Damage threshold ranges from 1 J/cm² at less than 100 nsec to 40 J/cm² at 1 msec. Product can store up to 50,000 points of data in nonvolatile memory and send to computer for analysis and storage.

Adchem Corp.    Riverhead, NY 11901
Jan 05, 2009 Type 7603-PET acrylic adhesive transfer tape bonds at room temperature to plasticized substrates, including vinyl sheets, banner materials, lettering materials, and extrusions. It is constructed with 3 mils of moderate tack acrylic adhesive coated onto 2-mil silicone-coated clear plastic liner and suits applications including sound dampening, vibration dampening, and dissipating shock energy. Type 7603-PET also works on 30% monomeric plasticized vinyl.

Atrix International, Inc.    Burnsville, MN 55337
Jan 05, 2009 High Capacity Integrated Pest Management Vacuum (HCIPM) has immediate containment 5 gal HEPA filter canister for safe disposal and exhaust air is filtered and free of most odors, making unit suited for large jobs such as bat guano, roach infestations, or general duty cleanup. Features include 9 ft clear hose, hose and intake plugs to safely contain debris, 16 in. rubber flexible gooseneck, crack and crevice tool, utility nozzle, two 20 in. extension wands, and detachable 25 ft power cord.

Cattron-Theimeg, Inc.    Sharpsville, PA 16150 1198
Jan 02, 2009 CattronConnect(TM) promotes safety and reliability for overhead crane operations and Industrial Locomotive operations by supplying remote health monitoring, real-time data logging, and alarm notifications via constant monitoring of critical components. It supplies users with access to customized, secure website as well as email alert notifications of pre-defined faults and failures. Customizable Web-based reports are available for various user-defined items.

Elma Electronic Inc.    Fremont, CA 94538
Jan 02, 2009 Designed without side or back walls around card cage area, E-Frame Chassis provides access for test and development. Unit includes carrying handle on top, front accessible test points, and monitoring LEDs for +3.3 V, ±5 V, ±12 V, ±24 V, and ±48 Vdc. With modular aluminum construction, tower can support up to 21 slots at .8 in. pitch or 17 slots at 1 in. pitch. Cooling is provided with three 150 cfm fans, which are speed-controlled with fan fail indication.

Cole-Parmer Instrument Co.    Vernon Hills, IL 60061
Jan 02, 2009 Featuring cast-aluminum housing, MASTERFLEX® B/T® process tubing pumps enable bulk transfer of viscous and shear-sensitive fluids. Pump head door opens fully to facilitate tubing inspection/change-out, and optimal occlusion is automatic when door is closed and latched. Secure retention mechanism, which grips tubing for trouble-free loading, also prevents tubing creep/roll. With PerfectPosition(TM) pump tubing in B/T 87 and B/T 91, pumps handle flow rates from 0.67-37 Lpm.

Fabrico, Inc.    Kennesaw, GA 30144
Jan 02, 2009 Designed to protect CDs and DVDs during stencil printing, RapidRelease Nesting Pads leave behind no residue and can be peeled off easily, speeding printing process. Pads require no curing time and are ready to use as soon as they are placed on printer.

Pneumadyne, Inc.    Plymouth, MN 55441
Jan 02, 2009 Available in 3-way and 4-way configurations with 1/8 NPT (F) ports, 22 Series Valves provide flow rate of 40 scfm at 125 psi and feature single or double air pilot and solenoid operators. Rated at 1 W, 15 mm solenoid valves offer variety of connector and voltage options, while 4-way valves include 3-position version with closed or exhaust centers. Machined via PneuTef(TM) process allows valves to be used with lubricated and non-lubricated air.

Parker Hannifin Corp.    Cleveland, OH 44124-4141
Jan 02, 2009 Constructed of nylon and supplied standard with ½ in. tube connections, Balston® In-line Disposable Adsorption Filters are capable of handling operating pressures up to 50 psig in gas service and up to 70 psig in liquid service. Examples of removable vapors include hydrocarbons, ketones, CO2, ammonia, mercury, methane, ethylene, methanol, and water vapor. Areas of use include sample analyzing, venting applications, emissions monitoring, and direct food contact applications.

Pres-On Products, Inc.    Addison, IL 60101
Jan 02, 2009 Offered in commercial-grade silicone, neoprene, or EPDM, Press-On Setting Blocks are installed inside window sash, between sash and insulated glass unit, to deliver protection to insulated glass from impact of sash opening and closing. Blocks stop glass from cracking, while maintaining integrity of glazing bead. Standard roll sizes are 50-100 ft long in thicknesses from 1/16 to ¼ in. Silicone blocks are lab tested to perform in temperature range of -80 to 450°F.

Del City    Menomonee Falls, WI 53051
Jan 02, 2009 Pre-Assembled Kits offer 8 different assortments that include O-ring, cotter-pin, stainless steel screws, heat shrink, multi-gauge terminal, and battery kits. Each piece is sorted in small, lightweight plastic or metal case, suited for workshop, vehicle, or job site. Component chart is attached to cover, enabling user to identify each piece.

Haydon Switch & Instrument, Inc.    Waterbury, CT 06705 3910
Jan 02, 2009 Kerk® precision non-ball lead screws and customized nut designs target motion control applications where ball screws may have been originally considered. For vertical applications, lead screws can be designed to self-lock and prevent back driving. Sliding motion between nut and screw converts rotary input to linear output motion, providing optimal accuracy. Manufactured from 303 stainless steel, lead screws come in 1/8-15/16 in. standard diameters with .02-3 in. standard leads.

WAGO Corp.    Germantown, WI 53022
Jan 02, 2009 Based on 10816-3 mechanical vibration standard, 750-645 2-Channel Vibration and Roller Bearing Monitoring Module analyzes vibration severity and shock pulse feedback utilizing 750-925 Tandem-Piezo® acceleration sensor. Mechanical shock pulse process data is transmitted via fieldbus to control systems and resulting analysis helps determine machine maintenance needs. Programmable system allows configuration of good, warning, and fault limits via WAGO-I/O-CHECK software.

Emhart Teknologies, A Black & Decker Co.    Shelton, CT 06484
Jan 02, 2009 POP® brand HS (High Strength) blind rivets provide positive mandrel head retention and maximized rattle and vibration resistance. Offering consistent clamp force, high-strength rivets also accommodate oversized holes and are compliant with ISO, QS, TS, and RoHS. Product line is available in range of ¼ in. dia domed head steel and aluminum materials.

Dialight Corp.    Farmingdale, NJ 07727
Jan 02, 2009 Measuring 3.2 x 1.6 x 1.1 mm, 597 Series microLED® SMD LEDs are available in 7 colors in AllnGaP and InGaN chip technology for high-brightness applications. Reverse-mount design allows LEDs to channel light into applications such as light-pipes and backlighting. Designed to help eliminate mixed-technology PC board processing, units are RoHS-compliant and compatible with automatic placement equipment as well as surface-mount reflow soldering processes.

Dialight Corp.    Farmingdale, NJ 07727
Jan 02, 2009 Featuring red, green, yellow, and orange illumination, 591-2X04-XXXF 2 mA low-current, surface-mount LED is compatible with automatic placement equipment as well as RoHS compliant surface mount reflow soldering processes. Unit includes silicone lens that mimics typical 3 mm through-hole LED lens and utilizes prismatic light pipe in black housing. Operating from -40 to +100ºC, it is available with either square or round lens and on 7 and 13 in. reels packaged on 16 mm tape.

Bosch Rexroth Corp., Linear Motion & Assembly Technologies Div.    Buchanan, MI 49107-1801
Jan 02, 2009 VarioFlow Generation 2 Guiding System provides all framing profiles, brackets, covers, and connectors needed to build application-specific conveyor guides for VarioFlow 65/90 and VarioFlow S flexible chain conveyors. Entire system uses one common fastener size and requires only one size allen head wrench for assembly/adjustment. All brackets, spacers, and connectors are molded of carbon and glass-loaded nylon for strength.