Steinbichler Optotechnik GmbH    Neubeuern   Germany
Nov 09, 2011 Offering complete solution for precision 3D digitalization, COMET 5 Eco can be positioned on various handling systems and includes INSPECTplus inspection software, column stand, and corresponding computer hardware. Modular construction enables system to adapted to various measuring field sizes, enabling individual configuration for respective measuring tasks. COMETplus software, projection technology, and one-camera technologies optimize speed as well as data quality.

Kason Corporation    Millburn, NJ 07041
Nov 09, 2011 Centri-Sifter® model YOB-SS features cantilevered shaft with 2 externally mounted bearings between screening chamber and motor drive, allowing all components to slide freely from shaft end for accelerated cleaning, screen changes, and inspection. System comes in configurations for gravity-fed applications or continuous operation in-line with dilute-phase pneumatic conveying systems, with screen cylinders of Nylon monofilament, woven wire, perforated plate or wedgewire screen.

LVD Group    GULLEGEM 8560  Belgium
Nov 09, 2011 Designed to handle workpieces up to 60 x 98.4 in., Strippit P-1525 delivers up to 270 hits/min on 1 in. centers and up to 600 hits/min in nibble mode. Machine processes material thicknesses up to 0.135 in. mild steel and up to 0.250 in. aluminum, providing ±.004 in. finished part accuracy and ±.002 in. finished part repeatability. In addition to servo-driven hydraulic ram, press features 21-station thick-style turret, three 2 in. auto-index stations, and PC-based Fanuc control.

Servomex Group Ltd    Crowborough East Su TN6 3DU  United Kingdom
Nov 09, 2011 Able to detect wide range of gases, SERVOTOUGH LaserCompact 2900 delivers true continuous in-situ monitoring and is optimized for measurement across pipes and along short cells. Unit utilizes Tunable Diode Laser Spectroscopy technology to deliver response time of less than 2 seconds with minimal interference from background gases. Certified to ATEX and IECEx standards, LaserCompact is suitable for gas measurements in hot, dirty, or dangerous environments.

Okamoto Corp.    Buffalo Grove, IL 60089
Nov 09, 2011 Capable of basic surface, slot, side face, and profile grinding with optimal straightness, flatness, and mirror finish over 2,000 x 1,000 mm area, ACC-208CHiQ double column, gantry-type surface grinder features 500 mm dia x 100 mm wide wheel driven by 22 kW motor and shift-plunge grinding cycles. Overhead dressing for rough grinding, combined with table top dressing for finishing, reduces cycle times, while touchscreen iQ control combines CNC technology and GUI for efficient operation.

Parker Fluid Control Division    New Britain, CT 06051
Nov 09, 2011 Enhanced 810 Series Angle Body Piston Valve features stroke limitation while maintaining standard optical valve position indicator. Latter lets user see if valve is functioning open or closed. Valves are offered with up to 3 in. port connections, temperature ratings to 430°F, and various metal actuator sizes that meet operating pressure ratings to 580 psi. Constructed with 316L stainless steel or bronze bodies, series comes standard with NPT porting; other connection options are available.

austriamicrosystems AG    Schloss Premstaetten A 8141  Austria
Nov 09, 2011 With on-chip capacitive sensor, Model AS3911 requires 5 µA of current and can wake in presence of tag. Automatic antenna tuning provides 1 W of output power, eliminating need for external booster circuit. IC includes analog front end and integrated data framing system for handling ISO 18092 (NFCIP-1) initiator, ISO 18092 (NFCIP-1) active target, ISO 14443 A and B reader, and FeliCa(TM) reader. Housed in 5 x 5 mm QFN package, Model AS3911 operates from 2.4-5.5 V over -40 to 85°C temperature range.

Elastocon TPE Technologies, Inc.    Rochester, IL 62563
Nov 09, 2011 Available as pellets in 1,000 lb quantities, Elastocon 2850PE and 2865PE have respective Shore A hardness of 50 and 65, are FDA compliant, and suit applications that require rubber-like properties and colorability. Both odorless and translucent thermoplastic elastomer (TPE) grades, formulated for extruding as well as overmolding and coextruding onto polyethylene, suit medical, consumer, and outdoor industrial applications that require UV stability.

Kin-Tek Laboratories    LaMarque, TX 77568 4202
Nov 09, 2011 Used for analysis of hazardous air pollutants, Trace Source(TM) Permeation Tubes emit constant flow of vapor to dynamically blend low-pressure gas mixtures. Emission flow measurements are traceable to NIST through fundamental measurements such as weight change, and temperature. Concentration can be adjusted by adjusting dilution flow rate. Applications include formaldehyde, hydrazines, ethylene glycol, cresols, naphthalene, and 15 other compounds not available as cylinder mixtures.

Southland Equipment Service, Inc.    Columbia, SC 29209
Nov 09, 2011 Used to protect interior building columns from abuse, Dixie Poly Column Protector is capable of withstanding 7,000 lb forklift impact at 6 mph. Yellow color provides visual alert to employees, while design facilitates installation and does not require any tools. Once installed, products never need to be repainted to cover scratches/scuffs. Various sizes are available to accommodate diverse application requirements.

Larson Electronics, LLC    Kemp, TX 75143
Nov 09, 2011 Suited for use where light placement is difficult, waterproof LED6W-GNM operates from 120-220 Vac and features 20 in. long goose-neck that, after being bent, holds its position until adjusted again. Integrated 6 W LED light head provides flood of clean white light for work and temporary lighting applications, and 100 lb magnetic base enables mounting to any ferrous metallic surface. Located at base, double ball joint provides 360° of rotation and 180° of tilt/pivot.

Electro Standards Laboratories    Cranston, RI 02921 3403
Nov 09, 2011 Offered in 19.0 x 1.75 x 8.0 in. rack-mount configuration, QuickSwitch Model 6299 allows device connected to Common port to access devices connected to A or B port. Single-channel switch is controlled locally by manually operating front-panel push-button. All fiber ports are LC duplex, multimode, 50/125 micron and support wavelength of 850 nm. Incorporating MEMS-based mirror/prism switch technology, switch supports Gigabit data rates and is suitable for fallback applications.

Electro Standards Laboratories    Cranston, RI 02921 3403
Nov 09, 2011 Measuring 19 x 8 x 1.75 in., Model 7329 RJ45 Switch features Cat6 switching capability with RS232 Remote Control. Unit eliminates need to plug and unplug cables by allowing connection to any one of 8 RJ45 interface devices from one common device. Eight front panel pushbuttons are used to individually control switch position, while ASCII RS232 Serial Data Remote Commands let user remotely lockout front panel pushbuttons as well as control and monitor switch position.

Lamar Lighting Co., Inc.    East Farmingdale, NY 11735
Nov 09, 2011 Controlled by 2 external infrared motion sensors, Model DS-LED operates at 20% light/power in standby mode and illuminates to full light output upon occupancy. Sensors are field adjustable for optimum coverage, range, and time delay using optional IR remote control. Factory pre-set to 5% light level with 5 minute time delay and 360°/26 ft diameter coverage, luminaire is suitable for stairwells, utility rooms, and other areas where maximum light levels are not required on constant basis.

Phoenix Contact    Harrisburg, PA 17111 0100
Nov 09, 2011 Able to accept solid, stranded, or ferruled wires from 26-12 AWG, UT 2.5-3L series features push-in bridging on each level that conserves space while distributing power. Vertical bridges electrically connect all 3 levels to one another, and Reakdyne screw-clamp design prevents screws from backing out. Each terminal point has labeling space for identification, and components are manufactured from corrosion-resistant copper alloy. Current ratings are 300 V at 20 A and 600 V at 5 A.

Larson Electronics, LLC    Kemp, TX 75143
Nov 09, 2011 Operating from 110 Vac current, Model LEDLB-4ET-IR-110V provides 850 Nm infrared light output and equivalent of 720 lumens. IP67-rated unit has aluminum body, polycarbonate lens, and waterproof design that resists ingress of water, dust, and contaminants. With adjustable trunnion handle, users can comfortably position and hold unit as needed. Emitter can be ordered in floodlight configurations, allowing user to choose intensely focused IR spotlight beam or more dispersed wide angle beam.

MadgeTech    Warner, NH 03278
Nov 09, 2011 Along with 4 Hz reading rate, Bridge101A features 1 million reading storage capacity, programmable alarms, optional password protection, and battery life indicator. Manual start/stop function can be executed multiple times without need to download data in-between studies, and data can be viewed in V, mV, and µV. Using MadgeTech Software, users can start, stop, and download from logger. Data can be displayed in graphical, tabular, and summary views as well as exported to MS Excel®.

Caton Connector Corp.    Kingston, MA 02364
Nov 09, 2011 Featuring 1-12 wires from 4-38 AWG, Hi-Flex Unshielded Cables can be configured to meet design requirements with virtually any connector attached. Stranded wire conductors are encapsulated in clear, flexible, silicone insulation. Rated from 100 V to 80 kVdc, cables last tens of millions of cycles in flexing applications making them suited for aerospace, festoon systems, food/beverage, industrial automation, medical, packaging, printing, pulp/paper, and semiconductor manufacturing.

American Opto Plus Led Corp.    Pomona, CA 91766
Nov 09, 2011 Available with digits from 0.3 in. high, SMD LED Displays maintain segment brightness consistency without exposure to hot spots. Displays can be made with ultrathin bar graphs, custom icon shapes in variety of colors, and from single-digit up to 5 digits. Ultra-thin design is suitable for reverse mount applications and designs that do not fit standard through-hole or thick displays.

ESRI    Redlands, CA 92373
Nov 09, 2011 Supporting georeferenced data, such as File Geodatabase and KML, CityEngine 2011 enables creation of 3D cities out of 2D data and allows design and modeling of virtual urban environments in 3D. Optimized user interface provides drag-and-drop data importing features. In addition to styles for rule-based modeling of buildings, software includes intuitive street editing tools, automatic skeleton subdivision of blocks into lots, and 3D Viewport functions such as reflections and ambient occlusion.