Green Turtle    Charlotte, NC 28217
Nov 10, 2011 Used in fats, oils, and grease (FOG) management, Proceptor®PDI engineered gravity grease interceptor features flow design and tank shape that promote regulatory compliance. Solution is available as hydro mechanical grease interceptor certified by Plumbing and Drainage Institute to 100 gpm and grease holding capacity of 200 lb. Able to serve several sinks, dishwashers, floor drains, and food disposal devices, system installs above ground, in kitchen/basement, in floor, or outside.

Emerson Process Management    Austin, TX 78754
Nov 10, 2011 Supporting conventional and intrinsically safe channel characterization modules (CHARM), DeltaV CHARM I/O Card provides flexibility in control system I/O topology. I/O can be added anywhere it is needed using standard Ethernet hardware. Each I/O channel has dedicated CHARM that provides signal characterization and galvanic isolation. Integrated inside CHARM, IS barriers provide single channel fault isolation as well as electrical isolation and energy limiting circuitry that meets IEC Ex ia ratings.

MagnaChip Semiconductor    Cheongju-si,Chungbuk   Korea (south)
Nov 10, 2011 Housed in 3 x 3 mm TQFN-16L package, 4-channel MAP3105 has input voltage range of 4-26 V and embedded MOSFET, which can boost output voltage to 45 V with switching range of 500 kHz ~ 2 MHz. Six-channel Model MAP3106, offered in QFN package measuring 4 x 4 mm, has input voltage of 5-24 V and embedded MOSFET which can boost output voltage to 40 V with switching range of 330 kHz ~ 1 MHz. Both include current overload protection, LED open/short protection, and over voltage protection.

MediaTek Inc.    Hsin-Chu   Taiwan
Nov 10, 2011 Integrating 802.11n Wi-Fi MAC, baseband, radio, embedded CPU, and power management unit in single chip, MediaTek MT5931 enables Internet access and peer-to-peer multimedia sharing for mobile and portable devices. SoC, measuring less than 9 mm² in chip scale package, also integrates PA, LNA, and T/R switches. Advanced Wi-Fi features such as STBC, Wi-Fi Direct, and Hotspot mode are fully supported to meet dynamic changes in Wi-Fi infrastructure.

Samplify Systems, Inc.    Santa Clara, CA 95051
Nov 10, 2011 As complete 64-channel transmit/receive beamforming front-end using AutoFocus(TM) technology and analog-front-end modules, SMK9130-A2 has multiplexed probe interface on one end and USB 2.0/x4 PCIe1.1 interface to back-end CPU on other. SUAPI 2.0 ultrasound API, included, abstracts underlying hardware in system. C++ middleware software layer provides UI for configuration and setup for ultrasound scan types and arbitrary probe definitions. Users can control all hardware parameters/functions.

Metaforic    Glasgow G2 2QZ  United Kingdom
Nov 10, 2011 Supporting companies creating software in complex distributed and parallel build environments, MetaFortress Enterprise delivers last mile protection against rootkits, backdoors, and malware on business-critical applications. Enterprise edition extends standard capabilities to enable customer applications to be compiled and protected at any scale of development infrastructure. Scalable solution works with proprietary build systems, open source, and commercial tools.

CD-adapco    Melville, NY 11747
Nov 10, 2011 Designed to solve multidisciplinary engineering problems, STAR-CCM+ v6.06 features parallel I/O file system support, sparse solver for electrical solutions, polyhedral meshing, and CAD reading technology. Live Model Checker provides feedback of model validity during setup process, checking for consistency and conflicts. With software, users can import 3D splines or sheet bodies that can be used as basis for creating solid body for analysis purposes.

STMicroelectronics    Lexington, MA 02421
Nov 10, 2011 Housed in SO-8 wide package, Model LCP12 protects against high-voltage surges on tip and ring connections of subscriber line interface cards, which connect telecom local loops to access network. Unit is rated for surge currents up to 75 A for 5/310 µsec waveshape at 4 kV. With firing-voltage range of -120 to +120 V and minimum holding current of 150 mA, Model LCP12 is compatible with most dual battery voltage SLICs.

Telco Systems Inc.    Norwood, MA 02062
Nov 10, 2011 ATCA hub blades T-HUB2 and T-HUB4 provide 1G/10G/40G connectivity and deliver networking capabilities that include switching, IPv4/IPv6 routing, MPLS, QoS, protection, redundancy, and clock synchronization. Statistical and dynamic schedulers can be customized based on any type of applications header fields for implementation across multiple blades or chassis. Blades also promote hardware utilization, programmable QoS-based application performance, and availability.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Nov 10, 2011 Sitara(TM) AM335x ARM® Cortex(TM)-A8 microprocessors with NEON at up to 720 MHz consume as little as 7 mW of power while providing developers with 3D graphics capabilities, touch screen controller, and peripherals on one chip. Power management options help keep power levels as low as 700 mW in active mode, while integration provides CAN, 2-port Gbe switch, Dual USB + PHYs, LPDDR1/DDR2/DDR3, PRU, ADC, and cryptographic acceleration.

Torchmate    Reno, NV 89502
Nov 10, 2011 Delivering plasma cutting, engraving, and routing capabilities, Growth Series(TM) 4X4(TM) machine can be used to design and cut everything from intricate and professional-quality metal parts to chassis or suspension components. Features include 3-axis motorized system (2 X-axis drives and one Y-axis drive and motor), optional water table, and software. Compatible with various tools, robotic metal cutting machine can produce multiple copies of same metal part with one computer click.

Framos GmbH    Munich   Germany
Nov 10, 2011 With more than 200 camera variants per image sensor, Visiosens VFU Camera Platform includes variety of CCD and CMOS image sensors ranging from 0.3-10.0 MP and variety of output interfaces, including USB 2.0 and USB 3.0. Camera housing, specifically designed for industrial systems and microscopy, offers multiple mounting options on each side and front face, which are symmetrical to optical axis of sensor. User can choose C-, CS-, or M12 mounts for all models.

Electro Standards Laboratories    Cranston, RI 02921 3403
Nov 10, 2011 Transparent to data speed and format, Model 7810 enables sharing single port HD-15 interface device connected to COMMON port among 8 other devices connected to Channel 1-8 ports. Local access is via front-panel pushbuttons, and remote access can be accomplished by 10/100 Base-T connection. Browser-based remote GUI lets users change switch position; lockout front panel; change login password; and re-configure switch's IP address. Anodized black box housing provides EMI/RFI shielding.

Pacific Aerospace & Electronic    Wenatchee, WA 98801
Nov 10, 2011 Suited for EMI engineers designing components for space applications, Class H EMI filter testing requirements provide alternative to Class S level testing. Hybrid approach adds most traditional Class S tests to SOURIAU PA&E's standard Class B testing process. Under Class S, one component failure will cause entire lot to be scrapped. Class H testing expands this restriction to allow for no more than one failure per lot, eliminating need to scrap entire lots of serviceable, tested parts.

Pacific Aerospace & Electronic    Wenatchee, WA 98801
Nov 10, 2011 Designed for hermetic applications, Mini Micro-D Connector can be configured with 9, 15, 21, 25, 31, and 37 pin counts. Beryllium-copper pins support 600 Vac and 3 A per pin, and each pin is hermetically sealed with Kryoflex polycrystalline ceramic. Laser welded into aluminum, titanium, or kovar housings, connectors provide greater than 5,000 MW insulation resistance at 500 Vdc, are MIL-PRF-83513/7 interface-compliant, and mate with connectors manufactured to MIL-PRF-83513/8.

Aerovox Corp.    New Bedford, MA 02745
Nov 10, 2011 Available in over 40 standard configurations, with ratings from 240-600 Vac, AeroPower(TM) Euro-Style PFC Capacitors feature vacuum-impregnated metalized polypropylene, round aluminum case with M12 mounting studs and 3-contact metric terminal block. Units are built to UL 810 and IEC 60831 standards and are UL Recognized CYTW2 and cUL Recognized CYTW8 certified. For safety, capacitors include pressure interrupter, self-healing technology, and external discharge resistors.

Mettler-Toledo International Inc.    Greifensee 8606  Switzerland
Nov 10, 2011 Featuring open, stainless steel construction capable of withstanding repeat washdowns, ICS4_9 and ICS6_9 portable food scales can be configured for variety of manual portioning and checkweighing tasks. ColorWeight® displays reduce eyestrain, and audit quality tracking enhances traceability. Benchprint and design allow integration at various points along processing line, and each model is available with 3 terminal mounting options. Built-in battery and WLAN capability are also standard.

Olympus Europa Holding GmbH    Hamburg 20097  Germany
Nov 09, 2011 Developed to meet microscopy needs for analysis and disease diagnosis in pathology and cytology, BX3 features true color LED illumination technology and built-in Light Intensity Manager (LIM). Latter improves user workflow and consistency by automatically modulating light intensity when working with different magnifications. Histological and cytological stains appear exactly same under true color LED as they do under daylight filtered halogen.

Beckman Coulter, Inc.    Fullerton, CA 92834-3100
Nov 09, 2011 Available for Biomek NXP and FXP Laboratory Automation Workstations, clear, non-conductive Biomek P1000 Span-8 Tip lets users visually inspect aspirated volumes and transfer full 1 mL of sample or reagent in single pipetting action without having to split volumes. P1000 Span-8 Wide Bore Pipette Tip, offering larger orifice, facilitates pipetting of viscous liquids or samples with large particulates. Both are made of 100% premium-grade virgin polypropylene.

Control Co.    Houston, TX 77258 8307
Nov 09, 2011 With response time of less than 10 sec, Traceable® Digital Hygrometer/Thermometer/Dew Point Instrument reports results in both °F and °C, from -40.00 to 220.0°F temperature and from -40.00 to 140.0°F dew point. Handheld meter, measuring 5½ x 3½ x 1¼ in. with 72 in. long cable and 7 in. probe, has 4-digit LCD that can be read from 10 ft away. When out-of-range condition is sensed, alarm sounds and display flashes. Computer output permits data to be captured, transferred, stored, and printed.