Larson Electronics, LLC    Kemp, TX 75143
Nov 11, 2011 Offering alternative to halogen and metal halide light towers, WALTP-2XWP400 Telescoping Tripod Light Tower is equipped with 2 waterproof and vaporproof 40 W LED light heads producing total of 2,924 lumens. Each light head, constructed of powder coated aluminum with polycarbonate lens and integral cooling fins, can be run independently. Featuring removable light head bracket and collapsible legs, aluminum tripod can be extended from 4-9 ft in total height.

Larson Electronics, LLC    Kemp, TX 75143
Nov 11, 2011 Providing bright white light in outdoor landscape applications, 6 W Model HOLL-LED6W is constructed of impact-resistant ABS plastic with polycarbonate lens and single hinge that enables light head adjustment once installed. Mounting stake is also ABS plastic and provides secure placement of unit. Operating with current ranging from 110-240 Vac, light provides 50,000 hour operational life.

Anver Corp. - Anver.Com    Hudson, MA 01749
Nov 11, 2011 Developed for lifting assembled equipment from conveyors to packaging systems requiring loads to be turned upside down, Anver PROT Series Side Grip Powered Rotator features motorized, powered rotation in both directions that can be locked in place and operated from single pendant control. Custom made side grippers with anti-skid suction pads securely handle up to 2,000 lb, depending upon load, while adjustable cross arms accommodate loads up to 12 ft wide.

Esco Tool    Medfield, MA 02052
Nov 11, 2011 Designed for use on pipe from 8 5/8 in. ID to 36 in. OD, Terminator MILLHOG® Welding End Prep Tool can bevel, face, and bore simultaneously on all types of hard alloys, including SuperDuplex, and pulls thick chip without cutting fluids. Tool rigidly clamps to ID and has tracker to compensate for out of roundness. Offered with 5 hp pneumatic or hydraulic motor, product can produce symmetrical end preps of any angle and has 8 sets of clamps and 2 wedges for entire tool range.

Logic Supply    South Burlington, VT 05403
Nov 11, 2011 Suited for use as commercial media player, NC108-1HD AMD Fusion System is designed around Nano-ITX motherboard featuring 1.6 GHz AMD T56N embedded G-series Fusion APU that provides HD acceleration and DirectX 11 support. Standard configuration includes HDMI, 4 USB 2.0, and Gigabit Ethernet interfaces as well as audio I/O. There are also 2 DB9 punchouts; customers can opt for VGA or RS-232 ports without any customization. Project customers can also opt for dual HDMI and dual VGA outputs.

Warsaw Chemical Co.    Warsaw, IN 46581
Nov 11, 2011 Designed for coin-operated auto fragrance dispensing machines, GREEN SENSE® concentrated, oil-based auto fragrance is non-staining and freeze protected for use in any climate. BLUE SENSE® Auto Fragrance is water-based and also supplied as ready-to-use product. Both are available with Midnight Ice automotive interior fragrance, which is sprayed into carpet under seats to neutralize odors and leave car interiors with fresh, clean scent.

CW Industries    Southampton, PA 18966
Nov 11, 2011 Rated 16 A at 250 Vac, Model GRSN-2011-2002 is suitable for kick switch applications. Full size SPST rocker switch can be mounted securely in .550 x 1.225 in. panel opening requiring no screws or other fasteners. Standard unit includes black housing and rocker knob but can also be molded in variety of colors with special markings to meet requirements. Applications include appliances, lighting systems, medical equipment, audio equipment, electronic devices, and power tools.

Malvern Instruments Ltd    Malvern Worcestershire WR14 1XZ  United Kingdom
Nov 11, 2011 Equipped with Aero dry dispersion unit, Mastersizer 3000 can measure materials from cement to coffee, cohesive minerals to fragile pharmaceuticals, from 0.1 micron to 3.5 mm in dry state. Modular dispersion venturi system lets user select appropriate dispersion mechanism for samples and maintains integrity of fragile particles. Optional venturi, which disperses sample with direct impaction mechanism, can be used for aggressive break up of agglomerates and cohesive materials.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Nov 11, 2011 Offered in 6.0 x 7.0 x 1.5 mm Little Star® package, 850 nm Model VSMY7850X01 contains 42 mil chip for drive currents up to 1A and pulses to 5 A, while Model VSMY7852X01 features 20 mil chip for drive currents to 250 mA and pulses to 1.5 A. Low thermal resistivity of 10 K/W for VSMY7850X01 and 15 K/W for VSMY7852X01 enables max current to be employed over operating temperature range of -40 to +100°C. With SurfLight surface emitter technology, all generated light is emitted through top of chip.

Thomas & Betts Corp.    Memphis, TN 38125
Nov 11, 2011 T&B® Fittings BlueKote® Form 7 and Form 8 Conduit Outlet Bodies feature interior BlueKote finish, which creates smooth surface that facilitates wire pulling and prevents wire damage while also protecting against corrosion. Other features include zinc electroplating, which protects cast-iron body from rust and rust creep; baked-on epoxy powder coating that is scratch resistant and tolerates harsh chemical exposure; and baked-on epoxy paint that provides additional corrosion resistance.

Omega Engineering, Inc.    Stamford, CT 06907
Nov 11, 2011 Accepting 2 thermocouple inputs, iSD-TC Series triggers alarm if temperature goes below or above set point. Alarm can also be triggered if AC power fails. In event of power failure, monitor will continue to collect data for 2 days powered by 9 V alkaline battery. Failure on Ethernet network will not interrupt data recording. Supplied with removable 2 GB SD Flash Memory card, iSD-TC can store up to 7 years of readings taken at 10 sec intervals.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Nov 11, 2011 Housed in miniature 0.25 in. cube, ICP® Model 356A03 features hermetically sealed titanium design. Cable strain relief connection with large crimp tube provides optimized shear and tensile strength. Compatible with any ICP® signal conditioner or readout device that includes ICP® power, Model 356A03 is suited for small component qualification, environmental stress screening, and vibration measurement with space restrictions.

Henkel Corporation    Rocky Hill, CT 06067
Nov 11, 2011 Comprised of resin and hardener, Germanischer Lloyd (GL)-approved Macroplast® UK 1340(TM) prevents crack propagation on wind blades and delivers long-term structural integrity on turbine assemblies. Two-part adhesive, when mixed, cures in 60-80 min at temperatures to 75°C. Cured product demonstrates tensile shear strength exceeding 20 MPa at -40 to +80°C and Tg of 65°C and higher. Dynamic fatigue strength lets wind blades handle deflection, dynamic load, and stress on adhesive bond line.

EXAIR Corporation    Cincinnati, OH 45249-1621
Nov 11, 2011 Featuring aerodynamic design that directs compressed air to single point of convergence, 1 NPT Super Air Nozzle(TM) is suited for blowoff, cooling, and drying applications located in corrosive, high temperature, food, and pharmaceutical environments. Unit is constructed of Type 316 SS with 1 ½ in. hex body. At 80 psig, air consumption is 135 scfm and sound level is 99 dBA, meeting OSHA standard for 2 hours of use per day without hearing protection.

Pres-On Products, Inc.    Addison, IL 60101
Nov 11, 2011 Featuring pressure-sensitive acrylic and silicone adhesive, respectively, S-500 and S-700 are primarily used to seal out environmental hazards from electrical, communications, and HVAC enclosures. Both products, which combine lightness of foam and sealing strength of sponge rubber, resist UV light, ozone, and extreme temperatures. UL recognized for flame retardance, tapes can also be used to isolate vibration in electronic components and vehicles.

QRP, Inc. a PEM Co.    Leland, NC 28451
Nov 11, 2011 Manufactured from stainless steel for corrosion resistance in harsh environments, Shackle Pins are available with shank diameters ranging from ¼-5/8 in., handling loads from 2,000-7,000 lb. Shackles can pivot when unobstructed to move 90° on both sides of vertical to correspond with application dynamics. To promote safety in use, full visibility of contrasting color groove indicates pin status as fully locked. Red button serves as caution in activation.

Schmersal Inc.    Tarrytown, NY 10591
Nov 11, 2011 Designed to meet stringent North American and European approvals, RSS36 Series is suited for highest level of machine safety circuits, PLe per ISO13849-1 and SIL3 per IEC61508. RFID technology may be used in combination with Pulse-Echo technology in series circuit up to 31 devices while maintaining desired safety level. Providing holding force of 5 lb, magnetic latch option can serve as door stop. Diagnostic LEDs indicate errors, mis-alignment, and door open/closed signaling.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Nov 11, 2011 Covering frequencies from 300 kHz to 1.05 THz, PNA and PNA-X Series with frequency converter measurement capability enable engineers to fully characterize mixers and frequency converters up to 67 GHz. Users can measure magnitude-, phase-, and absolute-group-delay response without using reference or calibration mixer. Measurements can be done on devices requiring external local oscillator signals, or those with local oscillators that are not locked to system's 10 MHz reference.

IceWEB    Sterling, VA 20166-9279
Nov 11, 2011 In addition to de-duplication, thin provisioning, and linked clone technology, IceWEB Storage platforms offer IceWEB Level 10 (L10) compression for enterprise data. Ten selectable levels of compression, based on performance and capacity needs, let IT organizations provide storage capacity their applications need without purchasing more hardware. Compression can also help reduce physical storage requirements.

Harvard Apparatus, Inc.    Holliston, MA 01746 1371
Nov 11, 2011 Run on PC, FlowControl(TM) offers flexibility to manually control single or multiple syringe pumps or operate them automatically via user-created single- or multi-step Methods. Software can display all pump operating parameters and also lets users store multiple Methods by name. Also, functionality covers graphically tracking pump progress, logging data, and storing Method information. Methods can be started, stopped, and reset on single or multiple pumps.