Linear Technology Corp.    Milpitas, CA 95035
Feb 02, 2009 With ability to deliver output voltages as high as 5.25 V from input voltage range of 1.8-5.5 V, LTC3125, 1.6 MHz, synchronous boost DC/DC converter suits multi-cell alkaline/NiMH applications. It can also deliver up to 500 mA of continuous output current at 5 V from 3.3 V input. Average input current limit can be programmed between 200-1,000 mA with ±5% accuracy. Synchronous rectification enables efficiencies up to 93%, while Burst Mode® operation lowers quiescent current to only 15 µA.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Feb 02, 2009 Capable of driving 3 in. nail into engineered lumber, 8 lb D51855 can be used for structural framing, floor decking, roof decking, truss installation, furring strips, wall sheathing, pallet and crate manufacturing, and fencing. It handles 15° wire collated nails from 1½-3½ in. in length and .099-.131 in. dia, and depending on nail size, can hold 200-300 nails. Features include trigger lock-off, four bolt nose design, tool-free depth adjustment, and adjustable, non-slip rafter hook.

TE Connectivity Ltd.    Berwyn, PA 19312
Feb 02, 2009 Available in either shielded or unshielded versions, Ethernet cable assemblies use industrial-grade PVC-jacketed cable for rugged performance. They are offered with either IP20 or IP67 sealing, suited for EtherNet/IP, DeviceNet, and ControlNet applications. Rated for 250 V, category 5e cable assemblies are available in standard lengths from 2-20 m, and meet UL AWM20276 and UL VW-1.

ORing Industrial Networking    Taipei County   Taiwan
Jan 30, 2009 Featuring 24 x 10/100TX and 2 x 1000 SFP COMBO ports, Model IES-3242GC-E supports Ethernet redundancy protocol, O-Ring, and RSTP/STP to protect mission-critical applications from network interruptions or temporary malfunctions. Unit delivers event notification through Syslog, email, SNMP trap, and relay output, and provides recovery time of less than 10 ms over 250 units of connection. Rack-mount switch supports port trunking, IGMP snooping, and port lock to prevent unauthorized MAC address.

ORing Industrial Networking    Taipei County   Taiwan
Jan 30, 2009 Mounted via DIN-rail or panel, IGMC-1011GF/1011GP supports one 1000Base-X multi-mode/single-mode Fiber or SFP port as well as auto-negotiation and auto-MDI/MDI-X in one 10/100/1000 Base-T(X) port. Both models offer redundant power input with reverse power protection and can relay output to carry capacity of 1 A @ 24 Vdc. Operating from -10 to +60°C range, converters come in rigid IP30 housing.

ORing Industrial Networking    Taipei County   Taiwan
Jan 30, 2009 Featuring 8 x 10/100TX PSE and 2 x Gigabit combo port, Model IPS-3082GC supports Ethernet Redundancy protocol, O-Ring, Open-Ring, O-RSTP, and RSTP/STP to protect critical applications from network interruptions or malfunctions. Unit provides recovery time of less than 10 ms over 250 units of connection. Suitable for DIN-rail or panel mounting, switch supports port trunking, IGMP snooping, RMON for traffic monitoring, and port lock to prevent access from unauthorized MAC address.

ITT Interconnect Solutions    Santa Ana, CA 92705
Jan 30, 2009 Available in 1-, 7-, and 51-way contact designs with wire sizes from 0.25-50 mm², APD Series features bayonet mating and secondary contact locking. Units have copper alloy contacts with tin or gold plating and high-grade PBT housings. Rated to 70 A per contact, connectors meet all DIN 72585 requirements. Sealing capabilities make connectors suited for off-road vehicles, boats, industrial automation, and defense applications where sealing against fluids is critical.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Jan 30, 2009 Supporting on-button changeover between Stick, TIG, flux cored, and MIG processes, PipeWorx(TM) automatically selects correct output studs, gas, and polarity for job at hand. Switching between processes does not require manually switching of polarity, cables, or hoses. Operators only select desired process and, as applicable, electrode or wire, gas, voltage, and wire feed speed. Up to 4 programs can be stored for each process, and interface facilitates operation.

Lucifer Furnaces, Inc.    Warrington, PA 18976 2088
Jan 30, 2009 Ranging in size from 6 x 6 x 6 in. to 24 x 24 x 48 in., Series 7000 suits hardening, drawing, preheating, annealing, brazing, normalizing, and special applications under air atmosphere. Construction, designed for minimum heat loss, includes reinforced welded sheet metal shell as well as multi-layered firebrick and mineral block insulation. Enabling operating temperatures from 1,850 to 2,350°F, heating elements are mounted on sides, door, and back for uniform heating.

American Crane & Equipment Corp.    Douglassville, PA 19518
Jan 30, 2009 Designed per CMAA Specification No.70 Revised 2004, Low Headroom Built Up Hoist is available in capacities up to 300 tons and is targeted for high speed and heavy duty service. Features include Magnetek Electromotive AFD controls, hardened steel wheels, and helical travel drive gearing, along with forged steel hook, hardened steel sheaves, and double grooved drum for true vertical lift. Optional features, such as hardened drum grooves and redundant brakes, are also offered.

Pinpoint Laser Systems    Peabody, MA 01960
Jan 30, 2009 Designed for use with Microgage measuring and alignment products, Windows-based Pinpoint Capture features large-screen format and choice of plots or graphs to follow measuring results. Readings from one Microgage display and up to 4 remote receivers can be viewed on computer and recorded at anytime, and then uploaded to spreadsheet and statistical package for analysis. Results can be recorded in manual mode with user's notes as well as in automatic mode.

Assured Automation    Clark, NJ 07066
Jan 30, 2009 With CB Series, users can operate electric or pneumatic actuators from remote location. Units are available with lamp indication for feedback confirmation of actuator/valve position. Housed in chemical-resistant, weatherproof enclosure, control boxes feature double-insulated, black plastic switches with contact rating of 10 A at 125/250 Vac. Boxes can also provide local indication for level sensing devices, as well as on/off control, eliminating full size control panel and terminal blocks.

Henkel Corporation    Rocky Hill, CT 06067
Jan 30, 2009 Available in formulations for pneumatic and manual dispensing, Loctite(TM) Two-Part Silicones rapidly bond metal, glass, and ceramic substrates, and cure to handling strength in 5-50 min. Shelf life exceeds 12 months at room temperature. With grades to meet UL-746C, non-corrosive adhesives resist temperatures to 230°C, cure through large gaps and enclosed bond lines, and require no primers. Products resist UV rays, water, outdoor temperature variations, and most cleaning solutions.

Selco Products Co.    Reno, NV 89521-5908
Jan 30, 2009 Featuring polyphenylene resin body, ½ in. OMH Series is designed to meet temperature shut-off up to 400°F. Manual reset units incorporate switch that utilizes electrically isolated, temperature-sensitive, snap-action bimetal disc. Contacts open on rise when surface or ambient temperature increases to disc set point. With operating temperature of 120-401°F and tolerance of ±14.4F, thermostats are suited for beverage equipment, appliances, food equipment, HVAC equipment, and heaters.

Molex Inc.    Lisle, IL 60532-1682
Jan 30, 2009 Designed to meet demands of server, storage, and data networking equipment, Impact(TM) 85 Ohm supports Intel's Quick Path Interconnect (QPI®) standard, PCIe 2.0/3.0, as well as any proprietary system design where 85 ohm differential impedance is desired. Design may be interchanged with Impact 100 Ohm signal module to accommodate system needs, as both are of same physical size, density, pitch, and PCB layout. They also use same guidance and power solutions.

Kokusai, Inc.    Indianapolis, IN 46268
Jan 30, 2009 Used for testing effects of vibration on everything from small parts to complete automobiles, Shaker series includes 1- to 3-axis machines with vibration speeds up to 300 Hz and displacements of ±50 mm. Some models are capable of 6-axis movement, and others can target loads up to 300,000 N with torsion torque up to 40,000 Nm. Packaging strength, protection, and durability; product resistance to scratching and damage; and any other kind of vibration damage can be simulated.

Belden    Richmond, IN 47375
Jan 30, 2009 Specifically designed for digital signal interconnect and cross-connect applications in telco central offices and data centers, DS-3 and DS-4 Series Cables come in 26 AWG, 735 A plenum-rated and 20 AWG, 734 A plenum-rated models, both in 3-count and 6-count configurations. Banana Peel cable construction eliminates outer jacket to achieve smaller outer diameter and optimize bend radius, while PVC Flamarrest individual jackets facilitate stripping and terminating.

Cone Drive Operations, Inc.    Traverse City, MI 49685
Jan 30, 2009 Suited for general automation or packaging machinery, Series S includes 5 sizes with speeds as high as 4,000 rpm. Right angle servo gear heads come with Conex gearing and are lubricated for life, vent-free. Output shaft connection has standard hollow bore and plug-in shafts to facilitate installation. Made of lightweight aluminum, reducers are suited for light-duty washdown applications.

RF Micro Devices, Inc.    Greensboro, NC 27409-9421
Jan 30, 2009 Die-level GaAs pseudomorphic heterojuction transistor (pHEMT) amplifier ICs SUF-7000/-8000/-8500/-9000 respectively cover 0.1-16 GHz, DC-12 GHz, DC-10 GHz, and DC-10 GHz frequency ranges. Available levels of P1dB performance are 13 or 15 dB; OIP3 ratings are either 27 or 28 dBm; and signal gains are 11, 12, or 19 dB, all at 10 GHz. Enabling flexibility for integration, products suit applications in aerospace and defense industry as well as telecom infrastructure and optical networks.

EntropySoft    Paris   France
Jan 30, 2009 Designed for complex environments with many user communities, EMC Documentum eRoom Connector enables read and write access to content stored in EMC Documentum eRoom repository. Non-intrusive connector takes into account all objects available in eRoom, including forums, tasks, and projects. Written in Java and also accessible via .NET and web services, connector helps customers achieve smooth content transfers between eRoom repositories and other collaboration applications repositories.