Custom Industrial Products, Inc.    Melbourne, FL 32904
Feb 09, 2009 Available with standard carriage size of 36 x 36 x 66 in., TL Series Vertical Material Lift provides material transportation between two levels, offering load capacities up to 350 lb, travel heights from 8-15 ft, and dual loading heights of 3 or 33 in. Operating from single or 3-phase power, modular unit features all-mechanical design that reduces noise and maintenance, helping provide chemically clean workplace.

Aremco Products, Inc.    Valley Cottage, NY 10989
Feb 09, 2009 Magnesium oxide filled, water based, 2-part ceramic adhesive and coating system Ceramabond(TM) 672 can be used in assembly of high temperature catalytic converters for applications to 2,800°F. It exhibits volume resistivity of 109 W-cm, dielectric strength of 255 V/mil, tensile shear strength of 500 psi, and torque strength of 21.6 ft-lb. Adhesive contains no VOCs, does not outgas in ultra high vacuum, sets at room temperature, and is cured at 200°F in 1-2 hr.

ProVent, LLC    Harbor Springs, MI 49740
Feb 09, 2009 Suited for metal finishing operations, Fourtex hybrid cyclone systems have no filters, pneumatics or water thus eliminating performance reduction due to filter plugging. Four air vortices keep process stream moving and cooling as larger particles are forced to cylinder walls to hopper section and into dust receiver.

Thermal Dynamics Corp.    Chesterfield, MO 63017
Feb 09, 2009 Available in 20 and 50 ft lengths, manual 1Torch utilizes 30 consumables that cover spectrum of manual plasma cutting/gouging in 20-120 A range. Features include O2-B and ATC connections and lead extensions that allow cutting at distances up to 100 ft from power supply. Designed as replacement torch, unit can be installed on most plasma systems, when combined with adapter.

Victor Equipment Co.    Denton, TX 76202
Feb 09, 2009 Featuring 90° Harris®-style head, Bulldog torch can be used with natural gas or propane. Features include UltraMix low-pressure mixer designed for LP gas, 3 heavy-duty tube supports, and supercharged preheat oxygen valve. Lightweight and rugged torch has body designed for high-flow applications.

Automated Precision, Inc.    Rockville, MD 20850
Feb 09, 2009 Designed to collect 3D data positions and 3D point clouds with simple manual movements, Axxis Arms and Arm/Scanner systems provide solution for detailed measurements, reverse engineering, prototyping, and quality control. Arms come in 6 and 7 axis models with reaches of 2.6 or 3.2 m, and feature USB interface, and lightweight construction using aeronautical aluminum and carbon fiber tubes. Measurements are taken with laser line scanner or optional ruby tipped touch probe.

TE Connectivity Ltd.    Berwyn, PA 19312
Feb 09, 2009 Consisting of cast aluminum heat sink, plastic locking ring, contact carrier, and tin-plated copper alloy contacts, LED Pixel Holder is available with 2-wire connection for single-color LEDs and 4-wire connection for RGB LEDs. Holder accepts LED board thicknesses from 1.0-2.5 mm, and heat sink fits standard GU10/MR16 light fixtures. Product is rated for up to 2.5 A and 50 Vdc, with operating temperature range of -40 to 120°C, and works with LEDs rated up to 3 W without forced air cooling.

Hennig, Inc.    Machesney Park, IL 61115
Feb 09, 2009 Mobile chip conveyor allows shops with auger chip processing machine tools to use larger chip bins or 55 gal drums instead of small chip cans. Features include variable speed drive and adjustable receiving chip chute that can be positioned for front, side, or rear discharge. Unit operates from 110 V source.

Assmann Corp. of America    Garrett, IN 46738 1844
Feb 09, 2009 Designed for material handling applications, Base Container BC450 double wall rectangular tank is constructed from crosslink polyethylene or FDA approved and NSF Certified linear polyethylene. With ability to hold chemical tote bins for up to 3½ hr, product offers partially sloped bottom for near complete draining from top suction. Features included are 2½ in. thick mild steel epoxy coated grating, maximum load capacity of 4,500 lbs, and 11 in. threaded access cap with gasket.

RNR Plastics, Inc.    Raynham, MA 02767
Feb 09, 2009 ClipsShop CSTON-1 grommet attaching machine comes with spring-assisted stroke which applies internal power for attaching grommet and can be adjusted for exact repeatability. Designed for self-piercing grommets from ¼ - 11/16 in., stroking pressure is adjustable and repeatable for applying each grommet with exactly same pressure. Product does not require external power source, and can use interchangeable self-piercing dies to eliminate need for pre-punching on most materials.

Kinetic Technologies, Inc.    Wickliffe, OH 44092
Feb 09, 2009 Along with formed and welded steel panel design, ProFlow LITE(TM) series of industrial carts feature low deck height, 4-bend ergo handle, floor lock, hook and eye coupling system, and green powder paint finish. They are available in 1,000 lb capacities, 2 deck sizes, and with 4-wheel caster steering. Products extend safe limits of human power to move loads manually, and carts may be tugged in trains.

Master Bond, Inc.    Hackensack, NJ 07601
Feb 09, 2009 With thermal conductivity of 25 BTU-in./hr-ft²-°F and volume resistivity of 1 x 10¹⁴ W cm, Type EP37-3FLFAN dielectric heat transfer adhesive works in temperature extremes, up to 250°F and down to 4K in cryogenic environments. Two-part thermal potting compound is formulated to cure at room temperatures and forms bonds that are resistant to shock, impact, thermal cycling, and chemicals.

Commetrex Corp.    Roswell, GA 30076
Feb 09, 2009 BladeWare IP-Fax Interop Test Suite is comprised of client application based on BladeWare stand-alone IP-based media server that provides developer with T.38 and G.711 pass-through interoperability testing facility. Suited for OEMs, this ready-to-test system can also be used to place and accept SIP calls and to send-receive faxes for testing purposes. Fax capability is based on TerminatingT38, and system is licensed for 50- or 100-port test environments.

EXFO    Vanier, QC G1P4B4
Feb 09, 2009 When combined with IMS subscriber emulator, hssFlex can wrap around IMS network to provide comprehensive, end-to-end testing, or characterize single network elements such as application servers or call session controllers. Key features include ability to simulate real-world interactions such as subscriber updating services, subscriber services being terminated due to non-payment of bills, and characterization of impact of denial of service attacks on IMS network.

Linear Technology Corp.    Milpitas, CA 95035
Feb 09, 2009 Housed in 3 x 3 mm DFN package, Model LTC3565 can deliver up to 1.25 A of continuous output current. Synchronous step-down regulator uses internal switches with an RDS(ON) of 0.13 W and 0.15 W to deliver efficiencies as high as 95%. With constant frequency up to 4 MHz and current mode architecture, converter operates from input voltage of 2.5-5.5 V, making it suited for single-cell Li-Ion or multi-cell Alkaline/NiCad/NiMH applications.

Linear Technology Corp.    Milpitas, CA 95035
Feb 09, 2009 Supplied in 3 x 3 mm QFN-20 or TSSOP-16E package, LTC3569 synchronous buck regulator delivers up 1.2 A continuous output current from one channel and 600 mA from each of 2 other channels. It operates from 2.5-5.5 V input using constant frequency current mode architecture, and each of 3 output voltages is independently programmable. Switching frequency can be programmed from 1-3 MHz or set at 2.25 MHz, and internal synchronous switches offer efficiencies to 95%.

Multisorb Technologies, Inc.    Buffalo, NY 14224
Feb 09, 2009 Featuring 2 servo-driven dispensing heads mounted on single chassis, Model APA-4000 dispenses sorbents into broad range of food and healthcare product packaging at speeds up to 600 packages/min. Left and right infeeds from 2 separate spool splicing station cabinets ensure constant product flow for continuous uninterrupted operation. Model APA-4000 can be configured for HDPE bottles for pharmaceuticals, medical device and in-vitro diagnostic pouches, and food product packaging.

Multisorb Technologies, Inc.    Buffalo, NY 14224
Feb 09, 2009 FreshPax® System combines FreshPaxoxygen scavenger packets in spooled form with high-speed dispensing equipment to offer food manufacturers sorbent solution that extends shelf life of food products. Composed of food-grade materials, oxygen scavenging packets reduce oxygen levels inside sealed packaging to less than 0.01% to protect packaged foods against spoilage, rancidity, and mold growth while maintaining color, flavor, and texture.

Oce Business Services, Inc.    New York, NY 10001
Feb 09, 2009 Located at law firms and corporate legal departments, Oce Onsite Discovery Management spans electronic discovery and paper evidence processing as well as litigation technology management. Service offers 3 levels, each of which includes onsite discovery consultant to manage projects. Remote services include offsite developer resources and access to Oce dataDeliver(TM) ASP document review system, which provides web-based collaborative review and production of scanned paper and electronic files.

Renesas Technology America, Inc.    San Jose, CA 95134-1368
Feb 09, 2009 Built around 32-bit SH-2A CPU core on 90 nm process, SH72531 is supplied in 24 x 24 x 0.5 mm, 176-pin LQFP package. It integrates 1.25 MB on-chip Flash memory and supports 120 MHz operation at temperatures up to 125°C. Flash memory operation speed reaches 100 MHz, and processing performance of 240 MIPS at 120 MHz enables fine-grained and real-time control of engine/transmission systems. Multifunction timer unit, 12-bit ADC, and various interfaces are included.