RedPrairie Corp.    Waukesha, WI 53186
Mar 03, 2009 Duty Management 2009.1 International Trade and Customs solution lets companies delay payment of all Customs duties and VAT until latest possible time. Replacing existing paper forms, solution specifically enables users to comply with HM Revenue and Customs (HMRC) initiative to implement electronic Alcohol and Tobacco Warehouse Declarations. It also lets users hold Authorized Economic Operator certificate details in system and include them in declarations.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Mar 03, 2009 Designed as dc stick welder and ac power generator, Outback® 185 has smooth dc welding output of up to 185 A for welding steel, stainless steel, or cast iron, as well as hardfacing projects due to its ability to operate up to 5/32 in. stick electrode. It features front accessible engine control panels, 6.8 gal fuel tank, and Low-Lift(TM) grab bars that allow for lifting unit on and off truck beds. Unit's high-capacity ac generator provides 5,700 W of peak and 5,200 W of continuous power.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Mar 03, 2009 Offered in compact case, Vantage 500 Perkins® is powered by 4-cylinder, 1,800 rpm turbo-charged diesel engine that meets EPA Tier 4i standards. Unit offers stick, TIG, MIG, flux-cored, and arc gouging mode, and can produce up to 12,000 W of continuous 1-phase ac generator power for common construction tools, while simultaneously welding at up to 250 A. With 20 gal fuel tank, unit offers 9 hr of welding at 500 A/40 V/100% duty cycle output, or 33 hr at high idle.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Mar 03, 2009 With digital meters for monitoring as well as MIG-STT® capabilities, dual power LN(TM)-25 PRO can be powered by either control cable or across arc cable, which allows operator to adjust voltage and wire feed speed remotely. It features heavy-duty spindle design with adjustable brake, and MAXTRAC® Wire Drive system with tool-less wire guides that eliminate birdnesting and set-up variability with no need for adjustment. Replacement cases are available in aluminum and polycarbonate.

M/A-COM Technology Solutions, Inc.    Lowell, MA 01851
Mar 03, 2009 Suited for receiver and transmitter applications, MAAM-009116 IP3 Intermediate Frequency (IF) Amplifier features 18.0 dB of gain, 22 dBm of output P1dB power, and 40 dBm of output IP3 linearity while maintaining low noise figure of less than 2.4 dB. Housed in industry standard SOT-89 package, single stage device meets demands of complex communications systems.

Trans/Air Manufacturing Corporation    Dallastown, PA 17313
Mar 03, 2009 Designed for use in heavy duty transit applications, UL Series has chassis design that utilizes lightweight recyclable materials for reduced fuel consumption, overall weight reduction, and reduced noise emission. UL500, 700, 800, 900 operate with heavy duty transit type compressor, while UL500 is also available with hermetic compressor for use on electric/hybrid vehicles. All models work with either high efficiency R134a or optional environmentally friendly CO2 refrigerant (R744).

Trans/Air Manufacturing Corporation    Dallastown, PA 17313
Mar 03, 2009 Rated at 120,000 Btu/hr, RTC-120 roof mounted condenser is designed for severe duty transit applications or where skirt space is limited or unavailable. Lightweight condenser utilizes 6 high capacity fans for maximum air flow, and features ABS or powder coated metal cover.

GOEPEL electronics LLC    Austin, TX 78759
Mar 02, 2009 Designed for Automated Optical Inspection (AOI) systems, module provides maximized image quality at 45° angle that covers entire inspection area of orthogonal camera. Images can be captured from any angle position in 1° steps. Various illumination variants and inspection functions are incorporated and unit is suited for inspecting concealed solder joints and components as well as PCBs. It is available with OptiCon BasicLine, OptiCon AdvancedLine, and OptiCon TurboLine systems.

Astec America Inc.    Carlsbad, CA 92008
Mar 02, 2009 Capable of delivering 12 V @ 12 W total power, DA12-M series single-output power adapters feature universal 90-264 Vac inputs in 4 AC plug configurations (US, UK, EU, AU). All are engineered to meet Level V Efficiency standards and fully certified by Energy Star 2.0 as well as CeC. With form factor that enables use of multiple adapters in dual wall outlet configurations, products offers built-in protection against overvoltage, over-temperature, and short-circuit/overload conditions.

OYSTAR USA    Fairfield, NJ 07004
Mar 02, 2009 With HDGC Fluid Bed Dryer-Granulator-Coater, all functions can be performed in one product container. HDGC Fluid Bed features Diskjet air distribution plate for thorough, uniform mixing and fluidization of batches. Tangential, high-velocity exit of process air prevents sticking/clogging and container dead zones. When granulating, particle size can be controlled/reproduced by selecting specific parameters. Uniform, homogenous granulate produces optimal flow/pelletizing characteristics.

OYSTAR USA    Fairfield, NJ 07004
Mar 02, 2009 OYSTAR Manesty Xpress® 700 double-sided press, designed to facilitate flexible batch production, features stepped cabinet design that promotes access to upper and lower compression zones for tool-free turret exchange. With bi-layer system, press features automatic weight control of each tablet layer. Independent monitoring of each layer is controlled via unique algorithm, and complete segregation of materials results in clearly defined demarcation line between layers.

Tregaskiss, Ltd.    Oldcastle, ON N0R1L0  Canada
Mar 02, 2009 Built-to-order, semi-automatic TOUGH GUN(TM) MIG Guns come in air- and water-cooled models with respective capacities of 350-650 A and 400-600 A. While air-cooled versions include aircraft-grade aluminum armored gooseneck, water-cooled guns feature stainless steel gooseneck. Both types integrate cable strain relief on both ends, TOUGH LOCK(TM) Contact Tips for extended wear life, and QUICK LOAD(TM) Liner system for accelerated liner replacement.

Misumi USA    Schaumburg, IL 60173
Mar 02, 2009 Available with 5 mm pitch, Models LX20 and LX26 feature travel rates of 250 mm/s, and include low dust raise grease, which significantly minimizes particle generation. Models come in standard or cover type with brackets that allow combination of 2 units on different axis. With 1,000 possible configurations, actuators can provide precision linear motion to packaging, medical, semiconductor, automotive, and other automated assembly operations.

Walls & Forms Inc.    Dallas, TX 75374
Mar 02, 2009 Comprised of 2 polyethylene graphic boards hinged together with plastic connecting pins, SB-BK Graphic Signage Boards offer interchangeable graphic capability and come in tripod, A-Frame, and corner wall-mount designs. All accept 24 x 36 in. posters and silk screen/vinyl decals on materials such as marker board, Masonite, and corrugated plastic. Designed as indoor/outdoor, all-purpose signs, 26½ wide X 42 in. high products contain pre-molded weight pockets and concrete strapping.

Wisconsin Oven Corp.    East Troy, WI 53120
Mar 02, 2009 Offering 2 zones of control, electrically heated Horizontal Conveyor Oven features 2 ft 3 in. x 5 ft 10 in. x 1 ft 8 in. chamber with max temperature rating of 350°F and normal operating temperatures of 176°F in zone 1 and 302°F in zone 2. Oven uses indexing parallel chain style conveyor system with cleat attachments for accurate rack positioning. Additional features include emergency stop button and photo eye at exit end to prevent indexing with load present in unload position.

Belmont Metals, Inc.    Brooklyn, NY 11207
Mar 02, 2009 Produced in small prototype (research) quantities, custom metallurgical alloy products and shapes are available from metal bases - aluminum, copper, nickel, tin, and zinc - for casting, chemical processes, and plating. Alloy compositions are verified throughout manufacturing cycle with spectrographs, utilizing NBS traceable standards. Along with standard formulations, shapes, and sizes, special formulations requiring adjustment of compositions and forms can also be accommodated.

Ashcroft Inc.    Stratford, CT 06614
Mar 02, 2009 Available in ranges from vacuum through 0/20,000 psi, Ashcroft® T2 features static accuracy of ±0.25% FS at 21°C and digital temperature compensation that ensures Total Error Band better than ±1% between -20 to +85°C. Unit can be configured with variety of process connections, output signals, and electrical termination options. Able to withstand overpressure, shock, vibration, and extreme pressure cycling, transducer is suited for industrial applications.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Mar 02, 2009 Intended for applications that require filter status check, Series PFG determines pressure drop on either side of filter through ¼ in. female NPT pressure connections, and relates value to 1 of 3 zones. Green indicates clean, while yellow recommends change, and red means filter is dirty. In addition to filter applications, Series PFG is suited for line loss, valve drop, and other differential pressure applications where indicator is needed.

Bicron Electronics Co.    Canaan, CT 06018
Mar 02, 2009 Operating from 500-3,000 V and up to 350 VA and 500 kHz, IGBT power control transformers may be used where high power and harsh electrical environments coincide. Products are custom-designed using circuit simulation and magnetic modeling techniques to control parasitics such as dc winding resistance, winding capacitance, and leakage inductance. Corona values are less than 10 pC @ 3.3 kV, HIPOT at 8 kVrms @ 60 Hz for 60 sec with under 2 mA leakage current, and BIL rating is 14 kV.

Maxim Integrated Products    Sunnyvale, CA 94086
Mar 02, 2009 Integrating all power functions required for OLED displays, MAX17065 includes step-up DC-DC converter, inverting DC-DC converter, regulated positive and negative charge pumps, and low-dropout linear regulator. It eliminates external power components by integrating synchronous rectifiers and operates over -40 to +85°C. Offered in 4 x 4 mm, 28-pin TQFN package, device suits applications in cell phones, digital still cameras (DSCs), MP3 players, and other consumer products.