OKW Enclosures, Inc    Bridgeville, PA 15017
Mar 09, 2009 INSTRUMET cases are available in 3U x 10.5 x 13.8, 3U x 19 x 13.8, and 3U x 19 x 17.7 in. sizes. Enclosures are manufactured in aluminum, with fixing screws hidden on underside, and feature base and removable rear panels with ventilation slots, 2 die-cast front bezels with caged nut mounting points, and top panel. All models feature 2 internal support rails which simplify installation of heavy subracks or chassis. Cases include 4 molded nonslip feet with tilt legs.

OKW Enclosures, Inc    Bridgeville, PA 15017
Mar 09, 2009 UNITEC enclosures feature 2 inclined operating panels, at right angles to each other, which enable simultaneous input of data on one side and readout on other. Measuring 5.826 x 8.267 x 3.149/0.984 in., ergonomic enclosures feature 3-part design and are molded in ABS in off-white. Case parts interlock and are secured by 2 self-tapping screws. Utilized for desktop or wall mounted applications, units can be specified with or without battery compartment for 3 or 5 x 1.5 V AA cells.

Finish Thompson, Inc.    Erie, PA 16501
Mar 09, 2009 Model SP22 self-priming pump features gooseneck design of suction passage that retains fluid in priming chamber for fast re-priming. Pump is powered by magnetic drive and can run dry without damage. With lifts up to 25 ft, corrosion resistant pump handles flow rates up to 250 gpm, working pressure to 90 psi, and up to 1.8 specific gravity. NPT or BSP threaded, flange or union connections, as well as impeller trims in 1/8 in. increments, are available.

Pittman Corp    Harleysville PA 19438
Mar 09, 2009 Designed for Pittman® brush and brushless DC motors, G30A models incorporate sintered steel planet gears to achieve high torque capacity and low audible noise. They offer maximum load capabilities of 106 oz-in. for 1-stage models and up to 1,250 oz-in. for versions with 4-stages or greater. Gearbox diameters range from 1.200 in. for round versions and 1.496 in. for square types, while lengths range from 0.895-1.585 in., and weights range from 3.9-6.6 oz, depending on model.

GAO RFID Inc.    Toronto   Canada
Mar 09, 2009 Suited for electronic label application and electronic article surveillance, 13.56 MHz high frequency, round paper RFID Tag GAO 113004 provides maximum read quantity of 30 labels/sec and read range of up to 10 cm. It is waterproof, dustproof and resistant to immersion in salt water, alcohol, oil, 10% HCl and ammonia. With capacity of 512 bits to 10 KB, ICODE and SLI compliant tag handles operating temperatures of -25 to 70°C.

Positech Corp.    Laurens, IA 50554-1299
Mar 09, 2009 Conco AJL offers lifting capability from 165-665 lb along with a lift range of up to 120 in. and reach from 8-16 feet. Features include threaded interface at end of cable and safety latch hook at end of chain. Secondary arm can be mounted above primary arm in low headroom clearance applications, and primary and secondary joints come with 360° continuous rotation. It can be mounted on overhead trolley, pedestal, wall mounted, or mounted on mobile/portable base.

BI Technologies Corp.    Fullerton, CA 92835-1051
Mar 09, 2009 Featuring powdered iron alloy core material, HA55 Series is designed for automotive underhood environments. Products have current inductance values from 7-20 µH, and recommended frequency is up to 400 kHz, depending on device. Rated current range is from 40-60 A, with saturation current from 43-50 A, and DC resistance is from 1.7-3.35 mW. Operating temperature range starts from -40°C to +180°C.

DAILY RFID CO.,LIMITED    Guangzhou, 510403  China
Mar 09, 2009 Designed to track and manage mobile and fixed assets, DL810, 13.56 MHz RFID asset tracking solution has readability up to 90 cm and uses anti-collision algorithm to enable stack of tagged assets to be scanned simultaneously. Installed throughout entrance, multi-tag reader can help to find assets even if they are placed in wrong location.

Zebra Skimmers Corp    Solon, OH 44139
Mar 09, 2009 Featuring heavy duty, mechanical components, Sump Level Regulator (SLR) activates user's water supply or fluid pump to maintain correct fluid operating level in each machine tool sump or central tank. It has only two moving parts, and offers simple, two-step installation. When coupled with Fill-Station(TM), unit creates automated fluid on demand system.

Optima Electronic Packaging Systems    Lawrenceville, GA 30043
Mar 09, 2009 Suited for transporting and storing of medical devices, supplies, and computing equipment, mobile lab carts feature modular design that provides flexibility in heights and locations of shelves, drawers, and mounts. Mounts include monitor mounts for top of cart and CO₂ tank mounting on side. Customizable carts feature egress holes for cable routing, corner bumpers for protection and aesthetics, and front-locking casters that can keep cart in fixed position.

Flexicon Corporation    Bethlehem, PA 18020 8006
Mar 09, 2009 All-stainless Sanitary Bag Dump Station for pneumatic conveying systems collects dust created during manual dumping of bulk materials from bags, boxes, drums, and other containers and allows tool-free wash down. High velocity vacuum fan draws airborne dust from operator's atmosphere onto 2 cartridge filters, which are accessed by removing interior baffle, and replaced using quick-disconnect fittings. Unit is also available mounted on frames with casters for in-plant mobility.

Assmann Corp. of America    Garrett, IN 46738 1844
Mar 09, 2009 With 450 gal holding capacity, double wall rectangular, low profile BC450 is designed to hold chemical tote bins for up to 3½ hr and offers partially sloped bottom for near complete draining from top suction. It is constructed from rugged, crosslink polyethylene or FDA approved and NSF certified linear polyethylene. Features include molded-in forklift access, 2½ in. thick mild steel epoxy coated grating, and complete fill assembly including ball valve and chemical transfer hose.

Security Engineered Machinery Co., Inc.    Westboro, MA 01581
Mar 09, 2009 With conical punch that delivers 12,000 lb of hydraulic force, Model 0101 Sledgehammer Hard Drive Crusher helps destroy all computer hard drives regardless of their size, format, or type, including 3.5 and 2.5 in. technology. Vibration free unit measures 22 x 10 x 19 in., weighs 105 lb, and requires 120 V for operation. Safety interlock prevents unit from functioning while door is open, and emergency stop button halts operation.

Sierra Instruments, Inc.    Monterey, CA 93940
Mar 09, 2009 Constructed of heavy-duty 316 SS wetted materials, Steel-Trak(TM) Model 640S immersible thermal mass flowmeter includes remote-mounted electronics and mineral-insulated cabling resistant to high temperatures. It provides accuracy of ±0.5% of full scale with repeatability of ±0.2% of full scale, and features Smart Interface(TM) Package for field programming and meter validation and diagnostics. Meter's ¾ in. dia sensor probe inserts into ducts and pipes up to 72 in. in size.

Epilog Laser Corp.    Golden, CO 80403
Mar 09, 2009 Allowing for 1,000 dpi engraving, entry level Zing 24 is available in wattages ranging from 30-60 W. It features Laser Dashboard(TM) that allows users to print directly from many Windows® based software programs they already use. Unit features Teflon® coated Infinion(TM) bearings, high-speed micro stepper motors, intuitive control panel, and Radiance(TM) optics.

Phoenix Contact    Harrisburg, PA 17111 0100
Mar 09, 2009 With quad band technology that allows worldwide usage, PSI-GPRS/GSM-MODEM/RS232-QB-USA modem provides global access to machines and systems via GSM connections. It has integrated TCP/IP stack that allows implementation of simple control systems into GPRS network. Operating in extended temperature range of -25 to 60°C, modem features 2 digital alarm inputs via COMBICON connector and 1 digital output via T-bus connector.

ERICO    Solon, OH 44139-2631
Mar 09, 2009 Suitable for use with CPVC pipes, EPB PLUS Loop Hanger is designed to simplify installation when hanging sprinkler piping. It has integral fold-over washer and annular stiffening rib, which eliminate need to add washers during installation. Flared edges on base of hanger protect pipes from coming into contact with sharp edges of hanger.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Mar 09, 2009 DIN rail-mountable, XCSA line of converters are available in versions with inputs ranging from 12-110 Vdc and outputs of 12 and 24 Vdc at 5-10 A. They are fully protected against short circuits, overloads, and over temperature, and are also input protected. Compact units have pluggable terminations, adjustable output, and LED status indicator.

Cicoil Corp.    Valencia, CA 91355
Mar 09, 2009 Designed for industrial motion video and frame grabber applications, Camera Link® Cable Assemblies encapsulate 11 parallel twinax conductors in clear one-piece silicone jacket, forming flat cable less than 3/16 in. thick. Each twinax conductor features finely stranded wires with dual shielding. Measuring 1.5 in. wide, assemblies offer 50 mm bend radius and are finished with metal EMI/ESD protective connectors with quick-release latches.

FISERV, Inc.    Brookfield, WI 53045
Mar 09, 2009 Configurable to suit specific environments, ARP/SMS Exceptions Workflow(TM) provides banks with fully integrated, online, real-time positive pay and reconciliation system. Exceptions processing solution combines imaging and workflow to route and manage positive pay and ARP exception items, including Day 1 and Day 2 corrections of positive pay exceptions. Accessible through browser-enabled workstations, it also reduces check fraud risk by identifying fraud earlier in process.