NSK    Ann Arbor, MI 48105
Aug 04, 2008 Offered in custom sizes ranging from RA15 to RA65 and equipped with retaining piece, RA Series Roller Guides support factory automation applications, and offer substantial reduction in roller passage vibration to ensure motion accuracy. High performance seals block entry of foreign matter such as wood chips, metal chips, and dust into rolling surface, preventing performance loss. For severe operating environments, rail covers are available that reduce amount of foreign matter.

PAM Fastening Technology    Charlotte, NC 28208
Aug 04, 2008 Weighing 5.1 lb and featuring 2-piece ergonomic design, Model PC-12 Cordless Screw Gun is 14 in. long, and is suited for remodeling punch-out jobs when corded tool is inconvenient or electric power is not available. Suited for professional remodelers and contractors for variety of drywall, assembly, and other applications, gun accommodates 1-2 in. fasteners and up to 600 screws per battery charge.

Remy International, Inc.    Pendleton, IN 46064
Aug 04, 2008 Featuring 180 and 200 A options with 3 mounting styles that allow flexibility when upgrading, Model 28SI includes Remote Sense(TM) technology that provides accurate voltage readings and optimizes battery state-of-charge. Dual Internal Fans design protects alternator from high under-hood engine temperatures. Employing lightweight design, unit suits school bus, shuttle bus, and recreational vehicles as well as trucks with high electrical loads.

Graco Inc.    Minneapolis, MN 55440
Aug 04, 2008 Suited for potting, gasketing, sealing, encapsulation, and syringe filling, Model PR70v variable ratio meter, mix and dispense system features Graco Control Architecture(TM) Fluid Control Module, which offers simplified wiring system and board-level diagnostics. It is designed for applications using up to 70 cc shot sizes, material ratios from 1:1 to 24:1 with accuracy to 1%. Available with range of feed package options, unit includes MD2 dispense valve for accuracy under high pressure.

Beckhoff Automation LLC    Minneapolis, MN 55337
Aug 01, 2008 EtherCAT® I/O terminals with time stamping latch exact system time at which edge changes occur; digital value output can occur at predefined times. Terminals with oversampling enable actual value acquisition or set value output with higher time resolution than communication cycle time. Distributed clocks with less than 1 µsec jitter and 1 µsec resolution are used for time synchronization across entire system. Fast I/O-enabled terminals offer input delays/switching times under 1 µsec.

DyneSystems, Inc    Jackson, WI 53037
Aug 01, 2008 Able to interface with Dyne Systems dynamometer controllers or industrial PCs-/PLC-based controllers running third party software, DS820 intelligent universal Power Amplifier Unit (PAU) displays real-time field current, input command, status, and fault messages on front panel diagnostic LCD. Analog 0-10 Vdc input enables unit to be used as standalone, open-loop eddy current power amp or incorporated into existing test cells with fully integrated closed-loop control units.

Humphrey Products    Kalamazoo, MI 49003
Aug 01, 2008 Suited for inline mounting or insertion into custom manifolds, 320 Series ¼ in. ported 3-way direct acting valves have continuous duty coil with power consumption of 8.0 W, flying leads, and push, non-locking manual override. Controlled short-stroke balanced poppet design lends to multimillion life cycle capability, eliminates need for lubrication, and tolerates impurities in air system. Valves have Cv of 1.0 and are rated for air and inert gas from vacuum at 28 in. Hg to 125 psig.

Saelig Co., Inc.    Pittsford, NY 14534
Aug 01, 2008 SolarLCD Modules combine solar panels, microcontrollers, low-voltage LC fluids, and hidden circuit board. Devices offer programmable, customizable message sequencing and do not require battery power. They can have up to 4 custom icons in positive or negative mode, with thickness options from 3 mm to less than 1 mm. Working indoors and outdoors, RoHS-compliant displays are rated for 50,000 hour life.

Wilkens-Anderson Co. (WACO)    Chicago, IL 60651
Aug 01, 2008 Able to measure aqueous or organic samples in Brix or Refractive Index, r² mini Pocket Refractometer features range of 1.3330-1.4465 RI and 0.0-62.0% Brix with accuracy of 0.0002 RI and 0.2% Brix. Housing is IP65-rated for water resistance and is dustproof, making it suited for testing in virtually any environment. CE, RoHS, and WEEE certified, refractometer also features auto-off mode, ergonomic design, and automatic temperature compensation.

Stedman    Aurora, IN 47001
Aug 01, 2008 Grand Slam(TM) uses high-chrome metallurgy to increase wear life of machine components, reducing metal replacement costs. Crush Plus(TM) Grinding Path System creates third crushing chamber to maximize one-pass product yield, while Max-Yield(TM) Automated Apron Adjustment System maintains gap setting adjustment for aprons and grinding path. Impactor is suited for use with aluminum dross and brick, clay, shale, grog, refractory brick, ceramics, floor tile, glass, and scrap carbide recycling.

Master Bond, Inc.    Hackensack, NJ 07601
Aug 01, 2008 USP Class VI- and FDA-approved, EP41SMED low-viscosity epoxy adhesive has 5:1 mix ratio by weight. Bonds are resistant to water, oil, and many organic solvents as well as cold sterilants, ETO, and gamma radiation. It contains no solvents or diluents, adheres to wide variety of similar and dissimilar substrates, and is available for use in pint, quart, gallon, and 5 gal container kits. Shelf life in original unopened containers is 6 months minimum.

Celsum Technologies Limited    Leicester LE1 5XY   United Kingdom
Aug 01, 2008 Measuring 178 x 365 x 350 mm, Model HGC controls humidity of chamber up to 2,000 ml nominal volume to relative humidity of 85% at temperatures from 5-85°C. Automated valving, controlled by humidity sensor at sample site, diverts some pre-dried air flow through water reservoir before being pumped to sample. Operating from mains supply of 85-264 Vac at 150 Va, generator has heated transfer line to avoid condensation and features software operation through Microsoft Excel(TM).

Sonobond Ultrasonics    West Chester, PA 19380
Aug 01, 2008 In addition to rotating head with circular welding disk, MS-5010B Foil Splicer(TM) Modular System is available with 110 or 220 V solid-state power supply that features automatic frequency control. It can be integrated into suitable production systems and can be used by solar panel manufacturers to weld aluminum strips to thin conductive metal layer deposited onto photovoltaic modules. Unit can also be used for clean splicing of aluminum and copper foils.

ACT Fastening Solutions    Gardner, MA 01440
Aug 01, 2008 Available in 6-29 in. lengths with 100 or 250 lb tie tensile strength, ACT 316 Stainless Steel Cable Ties are rated for service at 1,000°F uncoated and 302°F when polyester or epoxy coated. Supplied in plain and ladder styles, and in spring style that maintains tension when clamped onto solid objects, they suit indoor, outdoor, and underground applications. Ties can be installed manually or with automatic tension and cut-off tool.

Alliance Scale Inc.    Canton, MA 02021
Aug 01, 2008 Providing bar graph and audio-visual alarms to simplify kitting and other bench top weighing applications, Alliance/OHAUS® Model CKW Checkweighing Scale features dedicated target key and numeric keypad, permitting fast entry of set points and flexibility for positive or negative checkweighing with less than 2 sec stabilization. It lets users enter set points by range, weight, or percent variance from target. Unit is NSF, USDA-AMS certified and OIML approved.

Anver Corp. - Anver.Com    Hudson, MA 01749
Aug 01, 2008 Available as electric- or air-powered with pad configurations, Anver VFP-57 side-oriented vacuum lifter lets users feed large sheet or plate into presses and other equipment from narrower end. Featuring adjustable, telescoping arm assembly that slides into beam and is counterbalanced for smooth operation, it is suited for applications where stacked sheet or plate is only accessible from the end. Unit includes handlebar controls, vacuum guard system, and audio-visual alarm.

Advantech Automation Corp.    Cincinnati, OH 45240
Aug 01, 2008 With direct-VGA and DVI-D signal transmission, FPM-5151G includes on-screen display feature to adjust images on screen and front access USB connector that provides access to controller through USB extension cable. It offers lockable OSD keys with 2 user-defined contrast/brightness settings and 10-30 Vdc power input. Supporting panel, wall, desktop, rack, or VESA arm mounting, 15 in. unit has NEMA 4/IP65 compliant aluminum die-cast flat-sealed front panel with anti-rust chassis.

Bosch Rexroth Corp., Pneumatics Div.    Lexington, KY 40511
Aug 01, 2008 Suited for applications in tight installation conditions, RTC series compact rodless cylinders are available in 4 versions with 5/8-3 in. dia and maximum stroke length of 32.5 ft. RTC-BV (Basic Version) is suitable for universal use, while RTC-CG (Compact Guide) version offers high precision packed into compact dimensions. RTC-EG (E-line Guide) is guided version of rodless cylinders and RTC-HD (Heavy Duty) version is designed for handling heavy loads.

AAEON Technology Inc    Taipei   Taiwan
Aug 01, 2008 Incorporating onboard Intel® Ultra Low Voltage Celeron® M Processor up to 1 GHz and 200-pin DDR 266 SODIMM up to 1 GB, Model PFM-800P high performance PC/104 CPU module accommodates Intel® 852GM and Intel® 82801DB (ICH4). It supports 24/48-bit dual-channel LVDS TFT LCD and CRT/LCD simultaneous display, and ATA33 and Type I CompactFlash(TM). Unit features one 10/100Base-TX Ethernet port and PCI-104 expansion interface, and deploys 2 USB2.0 ports, 1 RS-232 port, and 1 RS-232/422/485 port.

R & M Materials Handling, Inc.    Springfield, OH 45502
Aug 01, 2008 Designed to lift staging, theatrical, and lighting equipment, Stagemaker® features AGMA rated precision gearing for less than 75 dB noise level, Class F insulated hoisting motor, electromagnetic dc disc brake, and varied power supply from 208-230 V. Lightweight, compact design makes unit suited for touring events. Aluminum housing includes single, removable panel that provides easy access to all internal components for maintenance operations.