Sealant Equipment & Engineering, Inc.    Plymouth, MI 48170-0965
Mar 13, 2009 Vertical handle mounted 1270-857 Kiss(TM) Dispense Valves are suited for dispensing low- to high-viscosity 1-component adhesives, sealants, and lubricants including polyurethane, silicone, heat cure mastics, PVCs, and grease. Manual assembly consists of Kiss fluid dispense valve, 4-way pneumatic valve to start and stop fluid flow, mounting bracket for attaching to tool balance, and low-force trigger. System is suitable for repetitive applications where operators dispense beads or drops of material.

Microstar Laboratories, Inc.    Bellevue, WA 98004-3039
Mar 13, 2009 With Model MXSB 074, signals can be transmitted on up to eight 4-20 mA current loops for real-time control of machinery or process equipment as well as automated test of sensors and process equipment. Unit derives each current output from 16-bit DAC on each channel and provides channel-to-channel isolation. MSXB 074 connects to DAP board directly controlled by PC or DAPserver. DAP can send dynamic signals to current outputs on SI module at aggregate update rate as high as 1 M updates/sec.

O.BERK Co.    Union, NJ 07083
Mar 13, 2009 Standing 7 in. tall, 240 ml Flute Round Bottle with 24/410 finish in PET has round base and lightweight construction. Material maintains clarity of glass while eliminating possibility of breakage. Custom colors, labeling, and silk-screen printing are available for this product, which is suited for cold-filled beverages, sauces, oils, food additives, and other liquid products where store shelf presence is important.

Headwall Photonics, Inc.    Fitchburg, MI 01420
Mar 13, 2009 Based on aberration-corrected concentric design, Hyperspec Extended VNIR sensor delivers performance optimized for process inspection applications such as semiconductor manufacturing, pharmaceuticals, and food safety/quality. Hyperspectral imaging instrument covers 600-1,600 nm spectral range and delivers spatial uniformity. Imager range addresses UV-VIS, VIS, VNIR, and Extended VNIR spectral regions as well as near infrared and short wave IR.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Mar 13, 2009 Compatible with wide range of slide-on terminal connectors, ASI busbar system is available in 2- and 3-level models that are offset to ensure wiring is separated. Each terminal features color-coded insulator to identify wire capacity of connection. Busbars are offered in 1 m length, which can be cut to any size, with up to 3 units held together by insulating holder.

C&K Components    Newton, MA 02458
Mar 13, 2009 With 5.7 x 4.0 x 2.0 mm footprint, SDS Series side-actuated, right-angle switches detect presence of mechanical devices. Micro-miniature units deliver 2 mm overtravel and actuation force of 75 g. Available with silver or gold contact and terminal plating, switches feature contact rating of 100 mA at 12 Vdc with max contact resistance of 100 mW. RoHS-compliant devices operate from -40 to +85°C and come in both SPDT-NO and SPDT-NC configurations.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Mar 13, 2009 Providing visual/audible status indication in industrial automation applications, AS-Interface Signal Towers can be powered directly by AS-Interface cable or auxiliary power supply. They feature IP65 housing and are available with red, yellow, green, blue, and clear LED options, which provide 100,000 hr of continuous operation. Audible alarms up to 105 dB are also available. Two wires can connect all stacklights together, and up to 31 towers can operate from one network.

L-Com, Inc.    North Andover, MA 01845
Mar 13, 2009 Suited for A/V installers that require addition of DVI ports in new or existing installations, DVIDDLFT DVI-D Dual Link Field Termination Connector can be installed with standard Philips head screwdriver. Terminal block area is clearly marked, ensuring proper termination. Featuring pre-mounted female-to-female DVI adapter, stainless steel WPDVIFF DVI Wall Plate is suited for professional installers as well as DIYs.

SWECO®, Div. of M-I L.L.C.    Florence, KY 41022
Mar 13, 2009 With screen mesh fused to tension ring, Fusion(TM) Screens eliminate use of adhesive, epoxy, or silicone in screen manufacturing, resulting in unitary construction that minimizes potential for contamination. Units are comprised of gasket, strain relief, and screen frame as one molded part. As option, one-piece center disc with integral strain relief is also available for screens needing center support. Fusion Plus model has FDA approved components for sanitary applications.

Custom Sensors & Technologies (CST)    Moorpark, CA 93021
Mar 13, 2009 Integrating motor and valve, Linear Motor Series provides proportional control of gas flow for energy-efficient gas heating. Synchronous model provides 10 mm displacement at 115 V, linear step speed of 0.833 or 1.67 mm/sec, and output force of 27-45 N. Featuring dual safety system, 2 stepper-based models incorporate -7.5° and -15° step angle, linear step displacement of 0.0167 and 0.033 mm/step, and output force of 38 or 58 N and 38 or 43 N, respectively. All provide linear travel of 10 mm.

Michelman Inc.    Cincinnati, OH 45236
Mar 13, 2009 Self-priming Flex HS-100 can be applied directly to variety of stock and untreated films using only corona, plasma, or flame pre-treatment. Product has ability to seal to itself from low temperature of 60°C to above melting point of polypropylene. Requiring just 1-2 dry microns of coating, Flex HS-100 produces clear and transparent finish and is food contact compliant. It has been tested on BOPP, BOPET, BOPA, Cellulose, and PLA films.

Maxon Precision Motors    Fall River, MA 02720
Mar 13, 2009 Featuring OD of 32 mm, Koaxdrive KD 32 combines worm and planetary gearing, with worm-formed motor pinion driving 3 offset planetary wheels interlocking with internal gear. Plastic planetary wheels allow for minimized noise and coupling element is assembled on motor side so shaft is not subjected to axial load. Many reduction ratios are available in 11:1 to 1091:1 range and gearhead provides torque of 6.5 Nm as well as input speed of 8,000 rpm.

PerkinElmer, Inc.    NORFOLK, MA 02181
Mar 13, 2009 Requiring no software installation, LABWORKS(TM) LIMS v6.1 laboratory information management system delivers access to product testing results from any mobile web device or browser. Program supports unique needs of laboratories, from pre-login sample organization through reporting and data distribution. Software is suited for process-oriented laboratories, including water treatment, chemical and biofuels production, refineries, and food processing plants.

Brookfield Engineering Laboratories, Inc.    Middleboro, MA 02346
Mar 13, 2009 DV-II+Pro EXTRA Viscometer comes with Ball Bearing Suspension System, which delivers extended durability for instruments that experience heavy use, multiple operators, or dusty/dirty work environments. Also included, EZ-Lock Spindle Coupling accelerates and facilitates process of attaching/detaching spindles in busy laboratory environments. To accelerate positioning, included Quick Action Lab Stand lets users move viscometer up and down by pressing one button.

Honeywell Sensing and Control    Golden Valley, MN 55422
Mar 13, 2009 Providing 3 V supply voltage capability, Model SS361RT comes in miniature SOT-23 surface mount package utilizing tape and reel format, while Model SS461R features flat TO-92 style package. Bipolar latch, Hall-Effect sensors are suited for variety of applications, including speed sensing, flow rate sensing, brushless DC motors, medication dispense control, electric window lifts, and convertible roof positioning.

Key Technology, Inc.    Walla Walla, WA 99362
Mar 13, 2009 Featuring sanitary tank that holds 145 gal of water, semi-automatic Basket Wash is suited for small to medium-large processors handling up to 3,300 lb of produce/hr. Closed-loop water system recycles and filters water, flushing baskets of produce with up to 175 gal of water/min, removing debris and minimizing bacteria content. Wash cycle time can be adjusted via Allen-Bradley controller. Basket is sized for safe lifting weights of no more than 30 lb.

Emseal Joint Systems, Ltd.    Westborough, MA 01581
Mar 13, 2009 CHEMSEAL+5 is pre-compressed, primary seal for expansion and construction joints where contact with chemicals and chemical dilutions is expected. It is composed of nonstaining, microsphere-modified-acrylic-impregnated foam backing, which is precoated with chemical-resistant polysulfide sealant. Able to resist water pressure of up to 5 ft without product deflection or leakage, sealant is suited for submerged or intermittent-contact applications.

Baumer Ltd.    Southington, CT 06489 1534
Mar 13, 2009 Available in NPN and PNP outputs, Magnetic Cylinder Sensors provide discrete output regarding end-of-stroke position of pistons in pneumatic cylinders. Five different C- and T-slot models are available for use in round cylinders and cylinders with tie-rods. IP67-rated housing withstands harsh and wet end-use environments. Featuring cable or fly-lead connectors and 3-30 Vdc supply range, non-contact sensors are suited for robotic and automated equipment in range of industries.

K-Tek    Prairieville, LA 70769
Mar 13, 2009 Snap action pneumatic switch, BETA Air Relay, features deadband of as low as 10 mbar and supports pilot supply and signal pressures up to 7.0 bar. It is available in as TYPE SA for Normally Closed operation and TYPE SB for Normally Open operation. Designed for valve control, bleed-off shut-down, or alarm applications, both offshore and on, product can also be safely used in hazardous areas, including Zone 0 (no spark) applications.

International Manufacturing Services    Portsmouth, RI 02871
Mar 13, 2009 Model VGX-2010WA dissipates 20 W at 100°C baseplate temperature, and features wraparound terminals for solder or epoxy attachment. Achievable VSWR is 1.3:1 to 12 GHz depending on implementation and attenuation accuracy starts at ±0.2 dB. Standard impedance of 50 W and attenuation values upto 30 dB are available including 0.5 dB increments.